Domestic Appliances and Personal Care
Mains Shaver
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification
©
00/01
4322 277 00179
HINTS FOR REPAIRS
a.
-
-
-
-
-
-
-
-
-
-
-
b.
-
CAUTION!
WHILE CHECKING THE P.C.-BOARD REMEMBER
THAT MOST COMPONENTS AND THE MOTOR
ARE ENERGIZED BY MAINS VOLTAGE.
Disassembly
Remove shaving unit, to prevent damages
during a repair.
Remove the screws A1 (4x).
Put the shaver on the table and remove the cover
from the shaver.
Pull the connection leads out of the terminals on the
bearing block of the motor and remove the p.c.-board.
Loosen the motor clamping springs on the bearing
block with a small screwdriver.
Remove the motor.
Remove the screws A2 (2x)
Unlock the peg clamping (3x) between frame and
hair chamber.
Remove the gearwheels and trimmer drive.
To remove the trimmer, first disassemble the trimmer
slide by pushing down the locking pegs (4x ”X” in
exploded view) and move the slide slightly outwards.
Make room between trimmer and cover with a small
screwdriver (”Y” in exploded view).
Assembly
The assembly must be carried out in reverse order
of what is described under a. Disassembly.
TECHNICAL DATA
Voltage
Power consumption
Motor voltage
Power supply
Shaving heads
Comfort control
SAP coding
100-240 V 50/60Hz
Motor depending
54 V
SMPS
HQ4 - 4822 690 30468
fixed setting
HQ4401
:
:
:
:
:
:
:
Service
C1
100-240 V
D1 D4
4852
4853
SK1
L1
C2
M
C4
R2
C3R3
16 15 14 13 12 11 10 9
12345678
IC1
R5
L2
R1
D5
R1