Philips HQ422 Service Manual

ﬁgure 1

Battery Shaver

HQ422

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

-This product meets the requirements regarding interference suppression on radio and TV.

-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.

TECHNICAL INFORMATION

DISASSEMBLYAND RE-ASSEMBLY ADVISE

Disassembly:

-Remove the shaving unit, to prevent damages during repairs

-Remove battery lid assy (see figure 1)

-Remove screws (2x)

- Remove cover

-Remove screw (1x)

-Remove battery holder assy

- Unlock the peg-clamping “Z” (4x) between frame (item 11) and hairchamber (item 8)

-Remove the gear assy (2x)

-Remove pinion

-Remove screws (2x) for disconnecting motor from frame

-To remove the trimmer, first disassemble the trimmerslide by pushing down the locking pegs “V” (2x) and move slide slightly outwards

-Make room between trimmer and cover with a small screwdriver, to release the peg fastening “Y”

Assembly:

-The assembly must be carried out in the reverse order of what is discribed under disassembly

-When fitting the shaver it must be checked if wiring is correctly positioned

REPAIR INSTRUCTION

- No specific issues

OPTIONAL (accessories)

- No specific issues

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

Subject to modification

03/05

PARTS LIST & EXPLODED VIEW	HQ422

4	V	15

1	Y
	5