Philips HP632900 Service Manual

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

Ladyshave softselect

HP6329/00

03/07

PRODUCT INFORMATION

Features :

- Soft-select shaving system

3 zones for shaving armpits, bikiniline and legs

- Other features

2 trimmers

Convenient foil zone switch

Waterproof, usable in the shower tab or bath

Operates on 1 NiCd rechargeable batterie

External charger, charging time:16 hours

A fully charged NiCd battery provides a minimum of

20 minutes shaving time

Cleaning brush

Pouch

Protection cap

Function strips on shaving head to improve the

gliding on the skin

- This product meets the requirements regarding

interference suppression on radio and TV.

- After the product has been repaired, it should function

properly and has to meet the safety requirements as

officially laid down at this moment.

TECHNICAL INFORMATION

- Power source : Rechargeable

- Shaving foil : 3 zones

- Material shaving foil : Nickel

- Number of guard teeth : 43

- Number of cutter teeth : 37

- Number of lamella : 27

- Pressure trimmer (N) : 1

- Pressure foil system (N) : 2,5

- Rotations per minute : 7500

- Motor permanent : permanent 1,2 V

- Voltage : 100 - 127 V or 220 - 240 V

- Frequency : 50 - 60 Hz

- Housing material : ABS / PP / SEBS

- Weight Ladyshave : 139 g

- Weight stand/charger : 182.5 g

- Colour : violet champagne

REPAIR INSTRUCTION

- Lubricate the shaving foil and the trimmers with a drop of

sewing machine oil twice a year.

OPTIONAL (ACCESSORIES)

- No specific issues

HP6329/00

to replace POWER UNIT (7)

MOTOR ASSY (8)

ACCU (9)

HOUSING (10)

remove SHAVING HEAD (3)

BATTERY COVER (11)

SCREWS (Z)

CUTTER (5)

to replace FOIL (4)

remove SHAVING HEAD (3)

Press the shaving head with some force

in the direction of the arrows, then

remove the foil.

Make sure the softselect slide is in the

middle position (bikini line) when you

insert the new foil.

Press the sides of the shaving head

slightly together and insert the new

foil.

A

B

C

Note that the pivots A,B and C should

snap into the corresponding holes.

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

2-3