Philips HP632854 Service Manual

Ladyshave softselect

HP6328/54

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features :

- Soft-select shaving system
3 zones for shaving armpits, bikiniline and legs

- Other features
2 trimmers
Convenient foil zone switch
Waterproof, usable in the shower tab or bath
Operates on 1 NiCd rechargeable batterie
External charger, charging time:16 hours
A fully charged NiCd battery provides a minimum of

20 minutes shaving time
Cleaning brush
Pouch
Protection cap

- This product meets the requirements regarding

interference suppression on radio and TV.

- After the product has been repaired, it should function

properly and has to meet the safety requirements as
officially laid down at this moment.

TECHNICAL INFORMATION

- Power source : Rechargeable

- Shaving foil : 3 zones

- Material shaving foil : Nickel

- Number of guard teeth : 43

- Number of cutter teeth : 37

- Number of lamella : 27

- Pressure trimmer (N) : 1

- Pressure foil system (N) : 2,5

- Rotations per minute : 7500

- Motor permanent : permanent 1,2 V

- Voltage : 120 V

- Frequency : 60 Hz

- Housing material : ABS / PP / SEBS

- Weight Ladyshave : 138 g

- Weight charger : 178 g

- Weight Blister : 467 g

- Blister dimensions : 196 x 96 x 274 mm

- Color HP6328/54 : pearl white

- SAP coding : HP6328/54

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

03/05

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

HP6328/54

to replace FOIL (4)
remove SHAVING HEAD (3)

Press the shaving head with some force
in the direction of the arrows, then
remove the foil.

REPAIR INSTRUCTION

- Lubricate the shaving foil and the trimmers with a drop of sewing machine oil
twice a year.

OPTIONAL (ACCESSORIES)

- No specific issues

Make sure the softselect slide is in the
middle position (bikini line) when you
insert the new foil.

Press the sides of the shaving head
slightly together and insert the new
foil.

A

B

Note that the pivots A,B and C should
snap into the corresponding holes.

C

2-3