Philips HP5215 Service Manual
Cellesse
HP 5215
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Type appliance : 13 V adapter from mains (AC/DC)
Voltage (mains) : 220-240 V, 50/60 Hz and
110-127 V, 50/60 Hz
Motor : DC type
Max. powerconsumption : 8 Watts
Underpressure : settings between 80 mbar to 250 mbar
Number of rollers : 2 non-driven rollers
Length cord : 2.5 m
Colours : blue haze & light lilac
Product meets the requirements regarding
interference suppression on radio and TV.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
4322 277 00386
01/05
DISASSEMBLY ADVICE + ASSEMBLY TIPS PARTS LIST
To replace:
SWITCH PLATE (4)
SPRING SWITCH
PLATE (5)
HOLDER PLATE (6)
PUMP (7)
ADJUSTING UNIT (8)
O-RING (9)
TUBE (10)
MICRO SWITCH (11)
Remove Flexible
Hand-strap (1)
2
1
Remove Screw cover A 2x
Set Adjusting knob (3)
to pos. 5
Remove Adjusting knob (3)
To replace:
ADAPTER (12)
SUPPORT (13)
ROLLERS (14 + 15)
LOWER HOUSING (16)
Remove Flexible
Hand-strap (1)
Remove Screw cover A 2x
Set Adjusting knob (3)
to pos. 5
Remove Adjusting knob (3)
Remove Upper housing (2)
Remove Tube (10) 2x
Remove Screw B 4x
Remove Support (13)
Pos. description service code
1 Flexible handstrip 4203 035 74320
2 Upperhousing 4203 035 74340
3 Adjusitng knob 4203 035 74440
4 Switch plate 4203 035 74400
5 Spring switchplate 4203 035 74380
7 Pump 4203 035 80560
8 Adjusting unit 4203 035 74430
9 O - ring 4203 035 74450
10 Tube (2x) 4203 035 70460
11 Micro-switch 4203 035 76600
12 Adapter + switch (11) EURO 220-240 V 4203 035 74420
Universal adapter + switch (11) 110 -127 V 4203 035 74790
Adapter + switch (11) UK 220 -240 V 4203 035 74780
Adapter + switch (11) Brazil 4203 035 74770
Adapter + switch (11) Korea 4203 035 74800
Adapter + switch (11) Argentina 4203 035 74760
Adapter + switch (11) Australia 4203 035 74750
13 Support 4203 035 74390
14 Roller rear side (colour blue) 4203 035 74370
15 Roller front side (colour pink) 4203 035 74360
16 Lower housing (suction bell) 4203 035 74330
17 Filter 4203 035 74350
18 Pouch (Not shown in the exploded view) 4203 035 74460
3
2
1
Remove Upperhousing (2)
4
5
Assembly tips
- Adjusting knob (3) ;
Before assembling the adjusting
knob (3), set the cam of the
3
2
adjusting unit (8) to the indicated
position.
1
5
N.B.
- To avoid dust from getting into the pump, the suction
opening has been closed with a plastic cap. Remove the
plastic cap before assembling.
- After the product has been repaired, it should
function properly and has to meet the safety
requirements as laid down and offi cially established
at this moment.
Cleaning and maintenance
Never immerse the appliance in water or rinse it.
For the best results, clean the appliance after every treatment
session with a moist cloth and, if necessary, a drop of washing-up
liquid. Make sure the fi lter does not get damp.
Do not use alcohol, acetone, benzine, abrasives, scourers
etc., to clean the appliance.
4
Cleaning the rollers
To clean the rollers select Level 1.
Switch on the product.
Wipe the rollers clean with a damp
cloth.
3
2
4
1
5
Cleaning the hand-strap (1)
The hand-strap with claps can be washed in a washing machine
at max.40 °C.
Washing may slightly change the colour of the strap
Loading...