Philips HP 710, HP 510 Service Manual
Philips Domestic Appliances and Personal Care
PRODUCT INFORMATION
TOOTH BRUSHES
HP 510
HP 710
Type HP 510 HP 710
Mains supply 120 Volt x x
200 - 240 Volt x x
Battery NiMh x x
NiCd x x
Charge indication light - x
Interval light - Oscillating brush head + active tip x x
Topography, colour v - shape blue green
Variable speed - x
Speed 60 Hz 45/60 Hz
Container for 4 brushes - Wall holder facility x x
SERVICE INFORMATION
Hand unit tooth brush (1)
Never open the hand unit of the tooth brush, because the
unit is not water tight anymore.
Incase of a defect, the complete unit must be replaced.
Charging unit (2)
Incase of a defective charging unit or cordset, the complete
charging unit must be replaced.
NOTES
For standardisation reasons, the handunit of the HP 710 has
to be replaced by the hand unit of the HP 735.
When discarding the appliance, remove the built-in
rechargeble battery.
The battery should be completely empty of charge.
This product meets the requirements regarding
interference suppression on radio and TV.
Published by Philips D omestic Appliances and Personal Care Printed in the Nethe rlands
4822 729 21863
97/08
PCS 88 827
©
Copyright reserved Subject to modification
EXPLODED VIEW PARTS LIST
HP 510 HP 710
5
1
4
2
5
1
4
2
Pos Description Service code
1
hand unit tooth brush NiMh HP 510
1
hand unit tooth brush NiCd HP 510
4822 690 10145
4822 690 10146
PCS 88 828
1
hand unit tooth brush NiMh HP 735
1
hand unit tooth brush NiCd HP 735
2
charging unit 200-240 V, Euro plug
2
charging unit 220 V, Korean plug
2
charging unit 120 V, flat pin plug
2
charging unit 200-240 V, Australian plug
4
wall bracket
5
set tooth brushes HP 790
4822 690 10142
4822 690 10143
4822 219 10374
4822 219 10375
4822 219 10376
4822 219 10377
4822 402 10872
4822 479 20218
Loading...