Philips HP4991/07 User Manual
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
The Philips TRESemmé Salon ProCeramic Diamond is a powerful hairdryer,
which offers the real professional quality you expect. Moreover, this
hairdryer has features that protect your hair from damage and give you the
reassurance of the best results.
The ion function produces negatively charged ions, which neutralise static
and prevent yaway hair, leaving it frizz-free, manageable and shiny.
Next to the ion function, this hairdr yer contains a ceramic element that
produces a gentler warmth than a conventional heating element and
thereby helps to protect your hair from overdrying.
General description (Fig. 1)
A Ceramic element
B Cold shot button
C Temperature switch
6 = Hot setting
5 = Warm setting
4 = Cool setting
D Airow switch
II = High airow for ultra fast drying
I = Gentle airow specially intended for styling
0 = Off
E Ion indicator light
F Ion slide switch
G Hanging loop
H Removable air inlet grille
I Ultra-slim professional concentrator
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
Keep the appliance away from water. Do not use it near or over water
contained in baths, washbasins, sinks etc. When you use the appliance in
a bathroom, unplug it after use. The proximity of water presents a risk,
even when the appliance is switched off (Fig. 2).
Do not insert metal objects into the air grilles to avoid electric shock.
Warning
Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the mains cord or the appliance itself is damaged.
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
This appliance is not intended for use by persons (including children)
with reduced physical, sensor y or mental capabilities, or lack of
experience and knowledge, unless they have been given super vision or
instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Caution
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
Never block the air grilles.
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
on the appliance again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Always switch off the appliance before you put it down, even if it is only
for a moment.
Always unplug the appliance after use.
Do not wind the mains cord round the appliance.
You may notice a characteristic odour when you use this hairdryer. This
odour is caused by the ions that are generated and is not harmful to
the human body.
Do not probe the ion generator with metal objects.
Do not use the appliance on articial hair.
This appliance is only intended for drying scalp hair. Do not use it for
any other purpose.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH
Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories or
parts, your guarantee becomes invalid.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
Using the appliance
Drying
1 Put the plug in the wall socket.
2 Settheairowswitchtothegentleorhighsettingtoswitchonthe
appliance.
3 Set the temperature switch to the cool, warm or hot setting.
4 Switch the ion function on or off with the ion slide switch.
The ion function reduces frizz and static electricity and is par ticularly
suitable for almost-dry hair.
5 To dry your hair, make brushing movements with the dryer at a small
distance from your hair (Fig. 3).
Tip: When you have nished drying each section, press the cold shot button and
direct the cool airow at your hair. This xes your style and adds shine.
Concentrator
The concentrator enables you to direct the airow straight at the brush or
comb with which you style your hair.
1 Snap the concentrator onto the appliance. (Fig. 4)
To disconnect the concentrator, pull it off the appliance.
-
1
A
B
C
D
E
F
G
H
I
2 3 4 5
6
Cleaning
Never rinse the appliance with water.
1 Unplug the appliance.
2 Remove the inlet grille to remove hairs and dust (Fig. 5).
3 Clean the appliance with a dry cloth.
4 Clean the attachments with a moist cloth or rinse them under the
tap.
Storage
Do not wind the mains cord round the appliance.
1 Unplug the appliance.
2 Put the appliance in a safe place and let it cool down.
3 You can store the appliance by hanging it from its hanging loop
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment (Fig. 6).
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Troubleshooting
If problems arise with your hairdryer and you cannot solve them with the
information below, please contact the nearest Philips service centre or the
Philips Consumer Care Centre in your country.
Problem Cause Solution
The
appliance
does not
work at all.
Perhaps the socket to
which the appliance
has been connected
is not live.
Make sure the socket is live.
The appliance may
have overheated and
switched itself off.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the grilles
to make sure they are not
blocked by uff, hair etc.
The appliance may
not be suitable
for the voltage to
which it has been
connected.
Make sure that the voltage
indicated on the type plate of the
appliance corresponds to the local
mains voltage.
The mains cord of
the appliance may be
damaged.
If the mains cord is damaged, you
must have it replaced by Philips,
a service centre authorised
by Philips or similarly qualied
persons in order to avoid a
hazard.
-
www.philips.com
u
4222.002.7066.1
HP4991/07
Loading...