Philips HP4982/17, HP4982/87, HP4982/07, HP4982/01 User Manual
B
A
C
H
I
G
D
E
F
J
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
The SalonControl Ion Shine from TRESemmé and Philips has been specially
designed to meet all your personal drying and styling needs, giving you
beautiful hair in the shortest time. Next to the separate airow and
temperature settings, this hairdryer offers additional versatility with the
turbo airow and the cool shot, to create a beautiful shiny hairstyle just the
way you like.
General description (Fig. 1)
A Air outlet grille
B Cool shot button
C Turbo button for extra airow
D Airow slide switch
O = Off
I = Gentle airow especially intended for styling
II = Strong airow for quick drying
E Temperature slide switch
6 Hot setting
5 Warm setting
4 Cool setting
F Ion slide switch
G Hanging loop
H Removable air inlet grille
I Ion indicator light
J Concentrator
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
Keep the appliance away from water. Do not use it near or over water
contained in baths, washbasins, sinks etc. When you use the appliance in
a bathroom, unplug it after use. The proximity of water presents a risk,
even when the appliance is switched off (Fig. 2).
Do not insert any objects into the appliance to avoid electric shock.
Warning
Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the cord or the appliance itself is damaged.
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
This appliance is not intended for use by persons (including children)
with reduced physical, sensor y or mental capabilities, or lack of
experience and knowledge, unless they have been given super vision or
instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Caution
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
Never block the air grilles.
The appliance has a safety function. If the appliance overheats, it
switches off automatically. Unplug the appliance and let it cool down for
a few minutes. Before you switch the appliance back on, check the grilles
to make sure they are not blocked by uff, hair, etc.
Always switch off the appliance before you put it down, even if it is only
for a moment.
Always unplug the appliance after use.
Do not wind the mains cord round the appliance.
You may notice a characteristic odour when you use this hairdryer. This
odour is caused by the ions that are generated and is not harmful to
the human body.
Do not use the appliance on articial hair.
Do not use the appliance for any other purpose than described in this
manual.
Never use any accessories or parts from other manufacturers or that
are not specically advised by Philips. If you use such accessories or
parts, your guarantee becomes invalid.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
Using the appliance
Drying
1 Put the plug in the wall socket.
2 Selectthedesiredairowsettingtoswitchontheappliance(Fig.3).
Set the slide switch to airow setting II for ultra-quick drying.
Set the slide switch to airow setting I for drying short hair or styling
your hair.
Tip: You can also use the turbo button for an extra powerful airow.
3 Set the temperature slide switch to the cool, warm or hot
setting (Fig. 4).
The hot setting 6 allows you to dry shower-wet hair very quickly and
safely until it is damp.
The warm setting 5 is especially suitable for drying damp hair until it is
almost dry.
The cool setting 4 allows you to gently dry hair that is almost dry and
helps to seal in shine.
4 Switch the ion function on or off with the ion slide switch (Fig. 5).
The ion indicator light goes on to indicate that the ion function has
been activated.
The ion function provides additional shine and reduces frizz and static
electricity. It is particularly suitable for dry and almost-dry hair.
-
-
-
-
-
,
2 3 4 5
6
7 8 9
10
1
www.philips.com
u
4222.002.7203.1
5 Dry your hair by making brushing movements with the hairdryer at a
small distance from your hair (Fig. 6).
Tip: When you have nished drying each section, press the cold shot button and
direct the cool airow at your hair. This xes your style and adds shine.
Concentrator
The concentrator enables you to direct the airow at the brush or comb
with which you style your hair.
1 Snap the concentrator onto the appliance (Fig. 7).
To disconnect the concentrator, pull it off the appliance.
Cleaning
Always unplug the appliance before you clean it.
Do not immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1 Remove the concentrator from the appliance before you clean it.
2 Clean the appliance with a dry cloth.
3 Take the air inlet grille off the appliance to remove hairs and
dust (Fig. 8).
To remove the air inlet grille, press the thumbrests on the left and the
right side of the air inlet grille simultaneously and pull the air inlet grille
off the appliance.
To reattach the air inlet grille, press the thumbrests on the left and the
right side of the air inlet grille simultaneously and press the inlet grille
onto the appliance.
4 Clean the concentrator with a moist cloth or rinse it under the tap.
5 Make sure the concentrator is dry before you use or store it.
Storage
Do not wind the mains cord round the appliance.
1 Remove the plug from the wall socket.
2 Put the appliance in a safe place and let it cool down.
3 You can store the appliance by hanging it from its hanging loop (Fig. 9).
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment (Fig. 10).
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Troubleshooting
If problems arise with your hairdryer and you are unable to solve them with
the information below, contact the nearest Philips service centre or the
Philips Consumer Care Centre in your country.
Problem Solution
The appliance
does not work
at all.
Perhaps the socket to which the appliance is
connected is not live. Make sure the socket is live.
The appliance may have overheated and switched itself
off. Unplug the appliance and let it cool down for a
few minutes. Before you switch the appliance back on,
check the grilles to make sure they are not blocked by
uff, hair, etc.
The appliance may not be suitable for the voltage
to which it has been connected. Make sure that the
voltage indicated on the type plate of the appliance
corresponds to the local mains voltage.
The mains cord of the appliance may be damaged. If
the mains cord is damaged, you must have it replaced
by Philips, a ser vice centre authorised by Philips or
similarly qualied persons in order to avoid a hazard.
-
-
-
HP4982/17
Loading...