Philips HP4944/00, HP4945/00 User guide

Register your product and get support at
www.philips.com/welcome
EN User manual
HP4944 HP4945
a
f
b
c
d
e
English
Congratulations on your purchase, and welcome to Philips! To fully
www.philips.com/welcome.

1 Important

Read this user manual carefully before you use the appliance and keep it for future reference.
WARNING: Do not use this appliance
near water.
When the appliance is used in a
bathroom, unplug it after use since the proximity of water presents a risk, even when the appliance is switched off.
WARNING: Do not use this appliance
near bathtubs, showers, basins or other vessels containing water.
Always unplug the appliance
after use.
If the mains cord is damaged, you must
have it replaced by Philips, a service centre authorised by Philips or similarly
qualied persons in order to avoid a
hazard.
This appliance can be used by children
aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
For additional protection, we advise
you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.
Do not insert metal objects into the air grilles to avoid electric shock.
Never block the air grilles.
Before you connect the appliance, ensure that the voltage indicated
on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
this manual.
Do not use the appliance on articial hair.
When the appliance is connected to the power, never leave it
unattended.
Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not wind the mains cord round the appliance.
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch the appliance on again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Noise level: Lc = 76 dB [A]
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientic evidence
available today.

Environment

Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help to preserve the environment.

2 Dry your hair

1 Check if the dual voltage switch ( ) on the bottom back of the
handle has been set to the local mains voltage before you connect the appliance. You can adjust the position of the dual voltage switch by means of a screwdriver or coin.
2 Connect the plug to a power supply socket.
For precise drying, attach the concentrator ( ) on the
hairdryer(
To disconnect the concentrator, pull it off the hairdryer.
3 Adjust the temperature switch (
airow for fast drying,
short hair or styling hair, or
The ion function activates when an airow is selected. The
function provides additional shine and reduces frizz.
).
) to for hot and strong
for warm and gentle airow for drying
for cool airow to set your style.
» When the function is on, a special odor may be smelt. It is
normal and caused by the ions which are generated.
After use:
1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Clean the appliance by damp cloth. 4 Fold the appliance ( 5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
).
).

3 Guarantee and service

If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at www.philips.com/ welcome or contact the Philips Consumer Care Center in your country.
The phone number is in the worldwide guarantee leaet. If there is no
Consumer Care Centre in your country, go to your local Philips dealer.

4 Troubleshooting

Problem Cause Solution
The appliance does not work at all.
The power socket to which the appliance has been connected may be broken.
The appliance may have overheated and switched itself off.
The appliance may not be suitable for the voltage to which it has been connected.
Check the appliance is plugged in correctly.
Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked
by uff, hair, etc.
Adjust the dual voltage switch to match the local power voltage.
© Royal Philips Electronics N.V. 2012 All rights reserved.
Specications are subject to change without notice.
Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owner s.
3140 035 31121
Loading...