Philips HP4867/00 User Manual

Page 1
Register your product and get support at
www.philips.com/welcome
EN User manual
Hairdryer
HP4867/00
Page 2
JLDUW6Q\U'QROD6 KW
:
f
Page 3
English
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the appliance and keep it for future reference.
WARNING: Do not use this appliance near water.
•
When the appliance is used in a bathroom, unplug it after use since • the proximity of water presents a risk, even when the appliance is switched off.
WARNING: Do not use this appliance near bathtubs,
•
showers, basins or other vessels containing water.
• Do not inser t metal objects into the air grilles to avoid
electric shock. Never block the air grilles.
•
Before you connect the appliance, ensure that the voltage indicated • on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
•
this manual.
Do not use the appliance on articial hair.
•
When the appliance is connected to the power, never leave it • unattended.
Always unplug the appliance after use.
•
Never use any accessories or parts from other manufacturers or that •
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid. Do not wind the mains cord round the appliance.
•
If the mains cord is damaged, you must have it replaced by Philips, a •
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
Page 4
This appliance is not intended for use by persons (including children) • with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with
•
the appliance. For additional protection, we advise you to install a residual current
•
device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
•
appliance and let it cool down for a few minutes. Before you switch the appliance on again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Noise Level: Lc = 80 db(A)
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientic evidence
available today.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help to preserve the environment.
2 Dry your hair
1 Connect the plug to a power supply socket.
For precise drying, attach the concentrator (• ) onto the hairdryer ( ). To disconnect, pull it off the hairdryer.
To straighten your hair while you dry it, attach the Straightening
•
attachment ( ) onto the hairdryer ( ).
Page 5
To disconnect, press both release buttons ( » ) simultaneously and pull it off the hairdrayer.
2 Adjust the airow switch (
for strong airow and fast drying.
•
The ion function activates when an airow is selected. The function
provides additional shine and reduces frizz.
When the function is on, a special odor may be smelt. It is normal » and caused by the ions which are generated.
3 Adjust the temperature switch (
airow, or cool airow to x your style.
with the Straightening attachment: Note: For optimum care, the operating temperature of the hairdryer is
limited when the straightening attachment is attached.
1 Comb your hair and take a section for straightening. 2 Put the tips of the straightening attachment on your scalp at the
roots of the lock to catch the hair in the comb.
3 Pull the straightening attachment downwards through the hair.
Note: Always hold the tip of the hair when you pull the straightening
attachment through it.
4 Repeat steps 2 to 3 with other locks until you have straightened and
dried all your hair.
After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Take the air inlet grille ( 4 Clean the appliance by damp cloth. 5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
for cool airow. Press the cool shot button ( ) for
The pivoting head optimally guides the hair through the » straightening attachment. The ocked area at the top of the straightening attachment adds » shine to the hair after the comb has straightened it.
) to for gentle airow and styling, or
) to for hot airow, for warm
) off the appliance to remove hair and dust.
).
Page 6
3 Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care
Centre in your country (you nd its phone number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Page 7
© Royal Philips Electronics N.V. 2009 All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
PDCC-2009 3140 035 20721
Loading...