Storage
Never wind the mains cord round the appliance.
1 Switch off the appliance and unplug it.
2 Let the appliance cool down completely on a heat-resistant surface.
3 Store the appliance in a safe and dry place.
Environment
Do not throw away the appliance with the normal household waste
-
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment (Fig. 5).
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, contact the Philips Consumer Care Centre in your
country.
Problem Possible cause Solution
The
appliance
does not
work.
There is a power
failure or the
socket to which
the appliance is
connected is not
live.
The mains cord is
damaged
Check if the power supply works. If
it does, plug in another appliance to
check whether the socket is live.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by Philips or
similarly qualied persons in order to
avoid a hazard.
HP4687/07
www.philips.com
u
4222.002.7067.2
ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
This TRESemmé Philips appliance is designed and created to give you the
salon styles you want, in a quick and easy way. We hope you enjoy using this
TRESemmé Philips styler.
General description (Fig. 1)
A Anodised titanium plates
B Temperature wheel
C Power-on light
D On/off switch
E Hanging loop
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
Keep the appliance away from water. Do not use it near or over water
contained in baths, washbasins, sinks etc. When you use the appliance in
a bathroom, unplug it after use. The proximity of water presents a risk,
even when the appliance is switched off.
Warning
Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the mains cord or the appliance itself is damaged.
If the mains cord is damaged, you must have it replaced by Philips, a
-
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
This appliance is not intended for use by persons (including children)
with reduced physical, sensor y or mental capabilities, or lack of
experience and knowledge, unless they have been given super vision or
instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Keep the appliance away from non-heat-resistant surfaces and never
cover the appliance with anything (e.g. a towel or clothing) when it is
hot.
Keep the appliance away from ammable items.
Never leave the appliance unattended when it is connected to the
mains.
Caution
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
The straightening plates and the plastic parts near the plates reach a
high temperature quickly. Prevent the hot surfaces of the appliance from
coming into contact with your skin.
The maximum temperature occurs just after heating up. The actual
temperature during use may be lower.
Always unplug the appliance after use.
Wait until the appliance has cooled down before you store it.
Always switch off the appliance before you put it down, even if it is only
for a moment.
Do not wind the mains cord round the appliance.
Only use the appliance on dry hair.
-
Do not use the appliance on articial hair.
Do not use the appliance for any other purpose than described in this
manual.
Do not leave the plates in your hair for more than a few seconds at a
time as this may cause damage to your hair.
Keep the straightening plates clean and free of dust, dirt and styling
products such as mousse, spray and gel. Dust, dirt and styling products
may cause damage to the anodised titanium plates.
If you use the appliance on colour-treated hair, the straightening plates
may stain.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
2 3 4 5
Using the appliance
Straighteners are powerful styling tools and must always be used with care.
As with all straighteners that reach salon-high temperatures, do not
use the appliance frequently to avoid damage to the hair. If you use the
straightener incorrectly or if you use it at the wrong temperature setting,
you could overheat your hair or even burn it. Always make sure you select a
temperature setting that is suitable for your hair type.
Straightening
1 Put the plug in the wall socket.
2 Set the on/off switch to ‘I’.
The blue power-on light goes on.
,
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and when
it is hot.
3 Turn the temperature wheel to select the required temperature
setting. Select a temperature setting that is suitable for your
hair. (Fig. 2)
Always select a low setting when you use the straightener for the rst
time.
For coarse, curly or hard-to-straighten hair, select a medium to high
setting.
For ne, medium-textured or softly waved hair, select a medium to
low setting.
Take extra care with pale, blonde, bleached or colour-treated hair, since it
is susceptible to damage at high temperatures.
4 Turn the temperature wheel to set the temperature.
5 Let the appliance heat up for at least 30 seconds.
6 Comb or brush your hair so that it is disentangled and
smooth. (Fig. 3)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Note: It is better to section off the crown area and to straighten the hair
underneath rst, followed by the top area.
7 Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance rmly
together.
8 Slide the straightener down the length of the hair in 5 seconds, from
root to hair end, without stopping to prevent overheating (Fig. 4).
9 Repeat this process after 20 seconds until you have achieved the
desired look.
10 Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.
Cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1 Switch off the appliance and unplug it.
2 Let the appliance cool down completely on a heat-resistant surface.
3 Clean the appliance with a damp cloth.
1