Always there to help you
Question?
Contact
Philips
Register your product and get support at
www.philips.com/welcome
User manual
HMP2500T
Contents
1 Safety and notice 3
Safety 3
Compliance 4
Care of the environment 5
Copyright 5
Warranty 6
Trademark notice 6
2 Overview 7
Main unit 7
Remote control 8
3 Get started 11
Connect 11
Switch on or off 12
4 Play from DVB services 14
First-time setup 14
Tune in to TV/radio services 15
Use the Electronic Program Guide (EPG) 19
Use the Personal Video Recorder (PVR) 20
5 Play from a USB mass storage device 23
1EN
6 Setup 24
Program 24
Picture 25
Channel Search 25
Time 25
Option 25
System 26
USB 26
7 UpdatethermwarethroughaUSBstoragedevice 28
8 Specication 29
2 EN
1 Safety and notice
Read and understand all instructions before you use this product. If damage is
caused by failure to follow the instructions, the warranty does not apply.
Safety
This 'bolt of lightning' indicates uninsulated material within the device may cause
an electrical shock. For the safety of everyone in your household, please do not
remove the covering.
The 'exclamation mark' calls attention to features for which you should read the
enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of re or electric shock, the device should not be
exposed to rain or moisture and objects lled with liquids, such as vases, should
not be placed on the device.
CAUTION: To prevent electric shock, fully insert the plug. (For regions with
polarized plugs: To prevent electric shock, match wide blade to wide slot.)
Only use attachments/accessories specied by the manufacturer.
The product shall not be exposed to dripping or splashing.
Do not place any sources of danger on the product (e.g. liquid lled objects,
lighted candles).
3EN
ModicationoftheproductcouldresultinhazardousradiationofEMCor
other unsafe operation.
Warning
• Never remove the casing of this product.
• Never lubricate any part of this product.
• Never place this product on other electrical equipment.
• Keep this product away from direct sunlight, naked ames or heat.
• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the
product from the power.
• Where the mains plug or an appliance coupler is used as the disconnect device , the disconnect
device shall remain readily operable.
Compliance
This product complies with the radio interference requirements of the European
Community.
Class II equipment symbol:
This symbol indicates that this product has a double insulation system.
Any changes or modications made to this device that are not expressly approved
by WOOX Innovations may void the user’s authority to operate the equipment.
Note
• The type plate is located on the bottom of the product.
4 EN
Care of the environment
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, and old equipment.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that
the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. Correct disposal of your old product helps to
prevent potential negative consequences for the environment and human health.
Copyright
This item incorporates copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
Specications are subject to change without notice. WOOX reserves the right
to change products at any time without being obliged to adjust earlier supplies
accordingly.
5EN
Warranty
• Never attempt to repair the product, this could lead to the risk of injury,
damage to the product and will void your warranty.
• Use the product and accessories only as intended by the manufacturer. The
caution sign printed on the back of the product indicates risk of electric
shock.
• Never remove the cover of the product. Always contact our Customer
Support for ser vice or repairs.
• Any operation expressly prohibited in this manual, or any adjustments and
assembly procedures not recommended or authorized in this manual shall
void the warranty.
Trademark notice
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used by WOOX Innovations Limited under license from
Koninklijke Philips N.V.”
HDMI, and HDMI logo and High-Denition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC in the United States and other
countries.
®
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
6 EN
2 Overview
Through HMP2500T, you can do the following on your high-denition TV (HDTV):
• Receive digital TV/ radio programs from the latest Digital Video Broadcasting
(DVB-T2) services;
• Schedule your watching, listening, or recording of the programs;
• Play media that you store on the USB device.
Main unit
i
h
g
f
a MAINS ~
b L / R
c Pr / Pb / Y
d VIDEO
e HDMI
f RF LOOP THROUGH
g RF IN
e
• AC power cord
• Connectors for audio output
• Connectors for component video output
• Connector for video output
• HDMI connector for audio/ video output
• Output connector for external TV antenna
• Input connector for external TV antenna
OK
b
c
d
j
k
a
7EN
h
• USB connector for media play and power charging of a USB mass
storage device
i Status display
j
• Press the button to switch on; To switch off, press and hold the button
for more than three seconds.
CH+/CH-/ /
• Navigate through the list of options
OK
• Select an option
CH+/CH-
• DVB: Select the next or previous service
/
• Increase or decrease the volume
k Power indicator
Remote control
Switch HMP2500T on or to standby mode
• Press
Select TV resolutions
• Press TV MODE repeatedly
Select media sources
TV / RADIO
• Press the button repeatedly to switch between the TV and Radio
modes
USB
• Switch to the USB mode
Navigate through options
• Navigate through options
OK
• Conrm the option
/ EXIT
• Exit
8 EN
• USB: Back one level
Select a TV/ radio service
(CH+) / (CH-)
• Switch to the next or previous channel
0-9
• Numeric keys for the entry of channel numbers
EPG (Electronic Program Guide)
• List of all TV/ radio programs
• Create your watching/ listening schedule
FAV
• Access the list of your favorite services
Use the PVR (Personal Video Recorder)
LIST
• Access the recorded programs
REC
• Record current program
• Access the programs in your watching/listening/recording schedule
Playmediales
• Start, pause, or resume the play
/ EXIT
• Stop the play
/
• Skip to the previous or next media le
/
• Search backwards or forwards within current le
• Press repeatedly to select a search speed
GOTO
• Skip to a point of time for media play
Red / Green buttons
• Rotate a photo
• USB: Zoom in or out the image
• TV: Select the aspect ratio options
REPEAT
• Select the repeat options
9EN
INFO
• Display the information about current program/ le during play
SUBTITLE
• Access subtitle options
AUDIO
• Access the options of audio languages
• Access the options of audio tracks
TTX
• TV/ Radio: Switch teletext on or off
Change the volume
/
• Increase or decrease the volume
• Mute/ unmute
Select setup options
• Press SETUP
10 EN
3 Get started
Connect
a ConnectHMP2500Ttoahigh-denitionTV(HDTV)throughanHDMI
cable (not supplied).
b Connect your TV antenna cable (not supplied) to RF IN.
c Connect the power cord to power.
To connect to a TV through AV cables
Audio/video cables (not supplied):
L
RVIDEO
Cable
3
HDMI
HDMI IN
SOURCE
TV
AV
LRVIDEO
11EN
Component video cables (not supplied):
Pb
Pr
L
RVIDEO
Y
Pb/CbPr/CrY
AV
• Make sure that the plugs and sockets match in color.
Switch on or off
1 On HMP2500T, press on the remote control to switch on.
• Alternatively, press on the main unit.
OK
2 On the TV, switch to the input source of HMP2500T:
• On the remote control of your TV, use the source button to select the
input source of HMP2500T.
AV
HDMI 1
HDMI 2
HDMI 3
Side HDMI
Side AV
SOURCE
TV
12 EN
3 To switch HMP2500T to standby mode, press again on the remote
control.
» The power indicator lights up red.
• Alternatively, press and hold on the main unit for more than three
seconds to switch off.
Auto standby
If there is no button press or media play on HMP2500T for three hours,
HMP2500T can switch to standby mode automatically to save power.
On the remote control, press SETUP. Go to to switch on [Auto Standby].
13EN
4 Play from DVB services
First-time setup
The rst time you use HMP2500T, do the following setup:
Installation Guide
OSD Language
Country
Channel Search
EXIT OK
EXIT
1 In [OSD Language], select the language for the onscreen menus.
2 In [Country], select the country of your current location.
3 In [Channel Search], press or OK to start auto search.
» HMP2500T star ts to search for available services.
» When the auto search is complete, the rst TV service star ts to play.
Auto search
When you move to a new place (such as a new city or country), restart auto
search for better reception.
1 On the remote control, press SETUP.
2 Go to and select [Auto Search].
» HMP2500T star ts to search for available services.
» When the auto search is complete, the rst TV service star ts to play.
English
England
Confirm
14 EN
Manual search
You can search for services by channel number or frequency.
1 On the remote control, press SETUP.
2 Go to and select [Manual Search].
Tune in to TV/radio services
1 On HMP2500T, switch to the TV or radio mode.
• On the remote control, press TV / RADIO repeatedly.
» You switch to the last played service.
2 To tune in to a service by channel,
• Press (CH+) / (CH-), or
• Use the numeric keys 0-9 to enter channel numbers.
To tune in to a service by service information,
• Press EPG. Press to switch between services.
To tune in to your favorite services,
• Press FAV.
Select from the list of services
1 In the TV or Radio mode, press EPG.
» You can select from the list of available TV/ radio ser vices.
2 Press to switch between services.
Sort services in the EPG
To display services as needed, you can sort the services in different ways.
1 On the remote control, press SETUP.
15EN
Program Edit
EPG
Sort
LCN
Program
By Service Name
O
EXIT
Return
2 Select > [Sort]:
[By LCN]: Services are sorted by Logical Channel Number (LCN).
[By ONID]: Services are sored by Original Network ID (ONID).
[By Service Name]: Services are sorted by service name.
[By Service ID]: Services are sorted by service ID.
3 Press to switch between options.
Create a list of favorites
On the remote control, press FAV. You can access the ser vices that you have
added to the list of favorites.
To add/ remove a service
1 On the remote control, press SETUP.
2 Select > [Program Edit].
• Enter your password (000000 by default).
OK
Conrm
» A list of ser vices is displayed.
16 EN
3 To add a service,
• Select a service. Press FAV.
» A pop-up screen is displayed for you to select the program type.
» The Favorite icon is added next to the service.
4 To remove the service,
• Select the service. Press FAV again.
» The Favorite icon is removed.
To access a favorite service
1 On the remote control, press FAV.
» A pop-up screen is displayed for you to select a service.
2 To switch between program types, press .
3 To select a service, press and OK.
Re-assign channel numbers
1 Switch off the logical channel number (LCN).
a On the remote control, press SETUP.
b In > LCN, press to select [Off].
2 Move a service to the channel number that you want to assign:
a In > [Program Edit], select a service.
Enter your password (000000 by default).
b On the remote control, press the Red button.
» The Move icon is added next to the service.
c Press / to move the service.
d To stop moving, press the Red button again.
» The Move icon is removed.
17EN
Edit the program list
By editing the program list, you can lock services, skip services, or change the
service name.
1 On the remote control, press SETUP.
2 Select > [Program Edit].
• Enter your password (000000 by default).
» A list of ser vices is displayed.
» You can edit the program list as needed.
Lock a service
You can set a password for some services.
1 Select a service.
2 Lock the service:
• On the remote control, press the Yellow button.
» The Lock icon is added next to the ser vice.
» To watch the locked service, enter your password (000000 by
default).
3 To unlock the service:
• Select the service. Press the Yellow button again.
18 EN
Use the Electronic Program Guide (EPG)
With the Electronic Program Guide (EPG), you can get the information about
current and upcoming programs, such as introduction and schedules.
Create your watching /listening schedule
With the EPG, you can create a schedule for the TV/ radio programs that you
want to watch or listen to.
1 Go to the EPG.
• On the remote control, press EPG.
• Alternatively, press SETUP, and then, select > EPG.
2 Select a program:
a Press to select a service.
b Press / to navigate through the programs.
Program Guide
001 TV ONE
25/05 14: 05-14:55 Program 1
25/05 14: 55-14:25 Program 2
BookOK Book list Page Down Page Up
Fri 25/05/2001 14:39
Page: 1 / 1
3 On your selected program, press OK.
» The event is added to your schedule.
» A pop-up screen is displayed for you to edit the event.
Schedule
Event
ProgramDateTimeRepeat Status
01 TV ONE25/05 14:55-15:25 Once
Event Eidt
Channel Type TV
Channel No. 0004
Channel Name TV ONE
Start Date(D/M/Y) 25/05/2001
Start Time 14:55
End Time 15:25
Repeat Weekly
Mode View
OK
Conrm
EXIT
EXIT
19EN
4 Edit the event:
In [Repeat]: Select how often event repeats, once, daily, or weekly.
In [Mode]: Select whether to view or record the program.
» At the scheduled time, the play or recording starts automatically (see
'Record as scheduled' on page 20).
To add, edit, or delete an event
1 On the remote control, press .
» The schedule is displayed.
2 On the remote control, press the red, green, or blue buttons to add, edit, or
delete a selected event.
Use the Personal Video Recorder (PVR)
With the Personal Video Recorder (PVR), you can record a program at the
scheduled time, or record the program during watching.
The recordings are saved to the USB device that you have connected to
HMP2500T.
OK
Record as scheduled
1 On HMP2500T, connect a USB mass storage device.
2 On the remote control, press .
» Your watching/ listening schedule is displayed.
20 EN
Schedule
Event
ProgramDateTimeRepeat Status
01 TV ONE25/05 14:55-15:25 Once
Add Edit Delete EXIT
3 To change an event to the recording mode,
a On the selected event, press the Green button to edit the event.
» A pop-up screen is displayed for you to edit the event.
b In [Mode], press to switch to [Record].
Schedule
Event
ProgramDateTimeRepeat Status
01 TV ONE25/05 14:55-15:25 Once
To add an event for recording,
• Press the Red button. In the pop-up screen, add an event and select
[Record] in [Mode].
» At the scheduled time, recording starts.
Event Eidt
Channel Type TV
Channel No. 0004
Channel Name TV ONE
Start Date(D/M/Y) 25/05/2001
Start Time 14:55
End Time 15:25
Repeat Weekly
Mode Record
OK
Conrm
EXIT
EXIT
Record during watching/listening
1 On HMP2500T, connect a USB mass storage device.
2 When you watch or listen to a program, press REC on the remote control.
» You start to record current program.
3 Press /EXIT to stop recording.
21EN
Play recorded programs
1 Make sure that you have connected the USB mass storage device to
HMP2500T.
2 On the remote control, press LIST.
» The list of recordings is displayed.
3 Select a recording to start play.
22 EN
5 Play from a USB mass storage
device
1 On HMP2500T, connect a USB mass storage device.
2 Switch to the USB mode.
• On the remote control, press USB.
3 Select a le to start play:
Multimedia
MusicPhoto Movie PVR
OK
Select Move
a On the Home screen, select an icon to go to the list of folders.
b Gotoafolder,andselectaletostartplay.
Go to PVR to nd your recordings.
c Press to go back to the upper level.
4 During play, use the remote control to control playback.
5 To exit USB, press /EXIT repeatedly to go back to the Home screen.
Press TV / RADIO to switch to the TV/ Radio mode.
OK
TV/RADIO
Switch to TV
23EN
6 Setup
You can change the setup options of HMP2500T.
1 On the remote control, press SETUP.
» The setup menu is displayed.
Program Edit
EPG
Sort
LCN
Program
By Service Name
O
EXIT
Return
OK
Conrm
2 To select an option,
a Press to switch to a menu: [Program], [Picture],
[Channel Search], [Time], [Option], [System], USB.
b Press / to select a menu item.
c Press to select an option.
3 To exit, press EXIT.
Program
[Program Edit]: Edit the list of services. You can change the sequence of the
services, change the service names, and lock, skip, and delete some services.
EPG: Check the program information and schedules, and create your schedule of
watching, listening and recording
[Sort]: Sort the list of services in different ways (see 'Sor t services in the EPG' on
page 15).
LCN: Select whether to keep the logical channel numbers of the services. To reassign channel numbers to the services, switch off LCN.
24 EN
Picture
[Aspect Ratio]: Select display aspect ratio.
[Resolution]: Select the video resolution that your TV suppor ts. See your TV
manual for details.
[TV Format]: Select the TV color system of your countr y. See your TV manual for
details.
Channel Search
[Auto Search]: Start the auto search of available TV/ radio services.
[Manual Search]: Search a TV/ radio service by service name or frequency.
[Country]: Select the country of your current location.
[Antenna Power]: Select [On] for the external antenna that requires power supply
(5 V, 75 mA).
Time
[Time Offset]: Select [Auto] to use the time of the TV/ radio services. Select
[Manual] to select your time zone in [Time Zone].
[Country Region]: Select the country of your current location.
[Time Zone]: To select your time zone, select [Manual] in [Time Offset].
[Auto Standby]: Switch HMP2500T off automatically when there is no button
press or media play for three hours.
Option
[OSD Language]: Select languages for the onscreen menus.
[Subtitle Language]: Select languages for the subtitle.
[Audio Language]: Select languages for the audio.
HDMI Audio: Select options for HDMI audio output. If you use TV speakers for
audio output, select [PCM]. If you use external amplier for decoding, select [RAW
HDMI On]. To switch off HDMI audio output, select [Off].
25EN
System
Parental Guidance
In [Parental Guidance], you can set password to programs with age restrictions. By
default, the password is 000000.
You can also lock some ser vices in > [Program Edit].
Set Password
In [Set Password], you can set your password that you use in [Program Edit]and
[Parental Guidance].
Restore factory default
In [Restore Factory Default], restore the factory defaults of the HMP2500T.
Information
In [Information], check the information about your HMP2500T. Before you
upgrade the rmware, check current version information of your HMP2500T.
USB
[Multimedia]: Go to the USB mode. To exit USB, press /EXIT repeatedly to go
the Home screen. Press TV / RADIO.
[PhotoCongure]: Select options for photo slideshow:
• [Slide Time]: Select the time interval between two slides.
• [Slide Mode]: Select the transition mode between two slides.
• [Aspect Ratio]: Select [Keep] to keep current aspect ratio of display.
Select [Discard] to play slides in full screen.
[MovieCongure]: Select options for movie subtitles:
• [SubtitleSpecic]: Select the font size.
• [Subtitle BG]: Select the background color.
• [Subtitle FontColor]: Select the font color.
26 EN
[PVRCongure]: Check the information about the connected USB storage device
that you use to record TV/radio programs:
• [Record Device] > [Disk]: Device name
[Record Device] > [TimeshiftSize]: Set the storage size that you want
to use to record TV/radio programs. Make sure that there is enough
free space on the USB storage device.
• [Format]: File system on the USB storage device.
27EN
7 Update the firmware through
a USB storage device
1 On your computer, do the following:
a Go to www.philips.com/supporttondthelatestrmware.
b Search for your model and click on "Software and drivers".
c Downloadthermwareupdateandsavetheletotheroot
directory of a USB storage device.
2 On HMP2500T, do the following:
a Connect the USB storage device.
b On remote control, press SETUP, and then, select [System] >
[Software Update] > [USB Upgrade].
» If a rmware update is detected, you are prompted to start the
update.
» HMP2500T restar ts automatically and then, the update starts.
3 Follow onscreen instructions to complete the update.
» When the update is complete, HMP2500T switches off automatically.
Caution
• Keep HMP2500T powered on and the storage device mounted before the rmware update is
complete.
28 EN
8 Specification
Note
• Specication and design are subject to change without notice .
AC power
Voltage information is printed on the bottom of HMP2500T.
Power consumption 9 - 9.5 W
Power consumption in standby mode < 0.5 W
Supported formats:
• Video: MPEG 1/2, H.264, MPEG 4, Xvid (1.00, 1.01, 1.03,
1.10-beta1/2),JPEG, DAT, MPG, MPEG, TS, TRP, TP, M2TS, VOB, MP4, MKV,
AVI, DMF (0, 1, 2,), Motion JPEG
• Audio: Dolby Digital, MPEG Audio, AC3, EAC3, AAC, HEAAC, LPCM,
IMP/MS ADPCM, LBR, MP3, M4A
• Picture: JPEG, PNG, BMP
HDD & USB support
• NTFS, FAT32, FAT16
• USB MSC support
• HDD: up to 1TB, USB 2.0; External power: Not required for 1.8'' or
2.5'' HDD
Subtitle support
• .srt, .sub, .smi, .ssa, idx+.sub
Video
• HDMI output: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
• Component video output for PAL TV system: 576i, 576p
Component video output for NTSC TV system: 480i, 480p
Audio
• Signal to noise ratio (1 kHz): > 90 dB (A-weighted)
• Dynamic Range (1 kHz): > 80 dB (A-weighted)
• Frequency response: +/-1 dB
Main Unit
• Dimensions (L x W x H): 180 x 113 x 45 mm
• Net Weight: 0.48 Kg
29EN
Specifications are subject to change without notice
2013 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX Innovations Limited or
one of its affiliates, further referred to in this document as WOOX Innovations,
and is the manufacturer of the product. WOOX Innovations is the warrantor in
relation to the product with which this booklet was packaged. Philips and the
Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
HMP2500T_12_UM_V2.0
Loading...