Philips HD7827, HD7825 User Manual
HD7827, HD7825
1
ENGLISH 6
DEUTSCH 29
FRANÇAIS (BELGIQUE) 54
NEDERLANDS 79
HD7827, HD7825
6
ENGLISH
Table of contents
Introduction 6
General description 8
Important 8
First use 11
Brewing SENSEO
®
coffee 12
Cleaning the machine 16
Descaling 19
Frost-free storage 22
Replacement 23
Environment 23
Guarantee and service 23
Troubleshooting 23
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support
that Philips offers, register your product at
www.philips.com/welcome.
Make your coffee moments truly special with
SENSEO
easy-to-use Philips SENSEO
the specially developed Douwe Egberts SENSEO
®
. This unique system combines the
®
coffee machine with
®
coffee pods, giving you a full, smooth coffee with a
delicious foam layer.
The Douwe Egberts coffee in convenient SENSEO
coffee pods and Philips’ unique new SENSEO
®
brewing system are perfectly matched to ensure
that the best taste and aroma are extracted from
the coffee.
To ensure a smooth and full coffee taste, you should
keep the following things in mind:
®
ENGLISH 7
Fresh water
Use fresh water every day. If you have not used the
coffee machine for three days, you have to ush it
with fresh water before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).
Fresh coffee pods
®
Use the SENSEO
specially developed by Douwe Egberts for your
SENSEO
®
coffee machine for a full, round taste.
The Douwe Egberts SENSEO
fresh longer if you store them in an airtight
storage container.
Discover all SENSEO
at www.senseo.com.
A clean machine - new ushing and
descaling procedures!
Note: Philips has improved the ushing and descaling
procedures. See chapters ‘Cleaning’ and ‘Descaling’ for
the new procedures.
Clean and descale your Philips SENSEO
machine regularly.
- Remove used coffee pods after brewing. If a used
pod has been left in the coffee machine and you
have not used the machine for some time, ush
the machine before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).
- If you have not used the coffee machine for three
days, you have to ush the machine with fresh
water before you use the machine again (see
section ‘Flushing’ in chapter ‘Cleaning’).
coffee pods that have been
®
coffee pods stay
®
coffee blends that are available
®
coffee
ENGLISH8
- Descale the SENSEO® coffee machine as
described in chapter ‘Descaling’ when the
CALC light goes on (after you have brewed
approx. 400 cups of SENSEO
also descale the SENSEO
often (every 3 months) in the same way. Descaling
takes 20 to 30 minutes. Do not interrupt the
descaling process.
General description (Fig. 1)
A Water reservoir
B Water reservoir cover
C Sealing ring
D Water distribution disc
E CALC light
F 1-cup button q
G On/off button with light ring
H 2-cup button qq
I Drip tray
J Cup tray
K Coffee spout
L Cover of coffee spout
M Coffee collector
N 2-cup pod holder qq
O 1-cup pod holder q
Important
Read this user manual carefully before you use the
machine and save it for future reference.
Danger
- Never immerse the machine in water or any
other liquid.
®
coffee). You can
®
coffee machine more
ENGLISH 9
Warning
- Check if the voltage indicated on the bottom of
the machine corresponds to the local mains voltage
before you connect the machine.
- This machine is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the machine by a
person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the machine.
- Do not use the machine if the plug, the mains cord
or the machine itself is damaged.
- If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to
avoid a hazard.
Caution
- Always return the machine to a service centre
authorised by Philips for examination or repair.
Do not attempt to repair the machine yourself,
otherwise your guarantee becomes invalid.
- Never put normal ground coffee or use torn pods
in the SENSEO
become blocked.
- Do not use the machine in combination with a
transformer, as this could cause hazardous situations.
- Always put the machine on a at and stable
surface.
- Never let the machine operate unattended.
- Do not use the machine at altitudes higher than
2200 metres above sea level.
- The machine does not work at temperatures
below 10°C.
®
machine, as this causes it to
ENGLISH10
- Flush the coffee machine with fresh water before
you use it for the rst time (see chapter ‘Before rst
use’). This causes the boiler to ll with water, which
is essential for the machine to work properly.
- Do not use the SENSEO
with water softeners based on sodium exchange.
- Philips strongly advises you to descale this SENSEO
machine every 3 months. If the machine is not
descaled in time and according to the procedure
described in chapter ‘Descaling’, this may lead to
technical failures.
- Never interrupt the descaling process.
- Never use a descaling agent based on mineral
acids such as sulphuric acid, hydrochloric acid,
sulphamic acid and acetic acid (e.g. vinegar).
These descaling agents may damage your
SENSEO
- After unpacking the machine, never put your
SENSEO
®
coffee machine.
®
machine on its side. Always keep it in
upright position, also during transport.
- This machine is intended for normal household
use only. It is not intended for use in environments
such as staff kitchens of shops, ofces, farms or
other work environments. Nor is it intended
to be used by clients in hotels, motels, bed and
breakfasts and other residential environments.
Compliance with standards
, This machine complies with all standards regarding
electromagnetic elds (EMF). If handled properly
and according to the instructions in this user
manual, the machine is safe to use based on
scientic evidence available today.
, The energy consumption of this machine in off
mode is less than 1 watt. This means that this
machine complies with European Directive
2005/32/EC, which sets the ecological design
requirements for energy-using products.
®
machine in combination
®
ENGLISH 11
First use
Unpacking
1 Remove the machine from the box.
Note: Make sure you store the 2-cup pod holder in a
safe place. It is an essential part of the machine.
Flushing the machine to ll the boiler
YOU CANNOT BREW COFFEE IF YOU
HAVE NOT FLUSHED THE SENSEO
®
COFFEE
MACHINE FIRST!
The ushing causes the boiler to be lled with water.
After this, the machine is ready for use.
Flush the machine in the following way:
1 Place a bowl with a capacity of at least 1.5 litres
on the cup tray.
2 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
3 Make sure a pod holder, without pod or pods,
is in place.
4 Put the plug in an earthed wall socket.
5 Press the on/off button 3.
The light rings around the 1-cup button q and the
2-cup button qq light up continuously.
6 To start ushing, press the 1-cup button q and
the 2-cup button qq briey at the same time.
ENGLISH12
During the ushing cycle, the water in the water
reservoir is ushed through the machine and the
boiler is lled with water. The ushing cycle takes
some time (approx. 90 to 150 seconds).
Never interrupt the ushing cycle halfway. If you
do, the boiler does not ll itself properly.
Note: During the ushing cycle, the machine produces
more noise than during a regular brewing cycle.
The machine switches off automatically when the
ushing cycle ends.
Now your Philips SENSEO
is ready for use.
Note: If the machine does not work, repeat steps 1-7.
Do not interrupt the ushing cycle.
®
coffee machine
Brewing SENSEO
®
coffee
Filling the water reservoir
1 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
The MIN indication on the water reservoir
indicated the minimum amount of water required
for brewing coffee. Always ll the water reservoir
beyond the MIN level.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
ENGLISH 13
Switching on the machine
1 Press the on/off button 3.
, The light ring ashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
, The coffee machine is ready for use when
the light ring lights up continuously.
Note: If the light ring ashes rapidly, the water reservoir
does not contain enough water for brewing one cup
of coffee.
Placing a pod holder
1 Release the lid by moving the lever upwards.
, The lid opens automatically.
2 Place the appropriate pod holder in the
machine.
Note: Make sure the pod holder is clean and the sieve
in the centre is not clogged, e.g. with loose coffee grounds.
- If you want to make one cup of SENSEO
use 1 coffee pod in combination with the 1-cup
pod holder q and the 1- cup button q.
- If you want to make two cups of SENSEO coffee,
use 2 coffee pods in combination with the deeper
2-cup pod holder qq and the 2-cup button qq.
®
coffee,
ENGLISH14
Placing one or two pods
1 Place the SENSEO
®
coffee pod(s) properly in
the centre of the pod holder, with the convex
side pointing downwards.
Note: Use SENSEO
specially designed for your SENSEO
®
coffee pods from Douwe Egberts
®
coffee machine
for a full and round taste.
Note: Make sure the coffee in the pod(s) is evenly
distributed and press the pod(s) lightly into the pod
holder.
Note: Never put normal ground coffee or use torn pods
in the SENSEO
blocked.
- Place 1 SENSEO
®
machine, as this causes it to become
®
coffee pod in the 1-cup pod
holder q.
®
- Place 2 SENSEO
coffee pods in the 2-cup pod
holder qq.
2 Close the lid and lock the lever.
It is not possible to brew coffee when the lid is not
properly closed and the lid lever is not locked. In
this case, the light ring around the on/off button
ashes intermittently
3 Place one cup or two cups under the spout
openings. You can adjust the height of the coffee
spout by sliding it upwards or downwards.
The cups you use should have a capacity of at least
150 ml. Do not use cups that are too large, as
they cause the coffee to get cold more quickly.
ENGLISH 15
4 Press the button indicating the number of cups
of SENSEO
®
coffee you want to brew.
- Press the 1-cup button q for one cup.
- Press the 2-cup button qq for two cups.
The SENSEO
®
coffee machine starts
brewing.
- The machine automatically supplies the optimal
amount of water.
- You can interrupt the brewing process at any time
by pressing the on/off button 3. If you switch
the machine back on after having interrupted the
brewing process, the machine does not complete
the interrupted brewing cycle.
Do not remove the water reservoir during a
brewing cycle, as this causes the machine to
draw in air. When this happens, the next cup is
only partly lled.
Note: If no coffee comes out of the machine, you have
not ushed the machine before rst use. As a result,
the boiler is not lled. Flush the machine as described
in chapter ‘Before rst use’ before you start brewing
coffee. If only a small amount of coffee comes out of
the machine, ush the machine as described in section
‘Flushing’ in chapter ‘Cleaning’ before you brew another
cup of coffee.
5 Remove the coffee pod(s) after use by lifting
the pod holder out of the machine and
emptying it.
Be careful when you do this, for there may still be
some water/coffee on the coffee pod(s).
ENGLISH16
Interrupting the brewing process
1 Press the on/off button 3 to interrupt the
brewing proces.
Note: If you do not switch of the machine, it switches
off automatically after 30 minutes.
Switching off
1 After use, press the on/off button 3 to switch
off the machine.
Note: If you do not switch off the machine, it switches
off automatically after 30 minutes.
Tips for the best SENSEO
- Use fresh water every time.
- Use the SENSEO
specially developed by Douwe Egberts for your
SENSEO
®
®
coffee pods that have been
coffee machine for a full, round taste.
Cleaning the machine
®
quality
Never immerse the SENSEO
®
coffee machine in
water.
Cleaning the coffee machine
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a
moist cloth.
3 Remove the coffee collector.
ENGLISH 17
4 Take the coffee spout out of the machine by
sliding it upwards.
Note: You can only remove the coffee spout after you
have removed the coffee collector.
5 Disassemble the coffee spout if you want to
clean it more thoroughly.
6 Clean the coffee spout, the coffee collector
and the drip tray in hot water, if necessary with
some washing-up liquid, or in the dishwasher.
7 Hold the cup tray in your hand while you
clean it with hot water. If necessary, use some
washing-up liquid.
The cup tray can also be cleaned in the dishwasher.
To clean the cup tray, always remove it from the
machine, as it might prove sharp when handled
incorrectly. Always handle it carefully.
8 Clean the pod holders in hot water, if
necessary with some washing-up liquid, or in
the dishwasher.
Check if the sieve in the centre of the pod holder is
clogged. If this is the case, unclog the sieve by rinsing
the pod holder under a running tap. If necessary, use
a washing-up brush to clean the sieve.
ENGLISH18
9 Clean the water reservoir in hot water, if
necessary with some washing-up liquid.
Note: If you use a washing-up brush, be careful not to
damage the valve in the bottom of the water reservoir.
Remove the water reservoir cover for easier cleaning.
10 Clean the water inlet on the machine with a
moist cloth.
Do not use an object with sharp edges to clean the
water inlet.
11 Rinse the parts with fresh water and put them
back into the machine.
12 Clean the water distribution disc with a moist
cloth.
Be careful when you do this; make sure that the
rubber sealing ring does not get stuck under the
edge of the water distribution disc. If it does, the
coffee machine will start leaking!
Note: Be careful not to damage the metal tab on the
water distribution disc.
Flushing the coffee machine
If you have not used the coffee machine for three
days, you have to ush the machine with fresh water
before you use the machine again.
To ush the boiler, brew two cups of hot water in
the following way:
1 Fill the water reservoir with cold water at least
up to the MIN level and put it back into the
machine.
ENGLISH 19
2 Put the 1-cup pod holder q or the 2-cup pod
holder qq in the machine without pod(s).
3 Close the lid and lock the lever.
4 Put two cups or a bowl under the coffee spout
to collect the water.
5 Press the on/off button 3.
, The light ring ashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
, The coffee machine is ready for use when
the light ring lights up continuously.
6 Press the 2-cup button qq to brew two cups
of hot water.
7 Throw away this water. Now the machine is
ready for use again.
Descaling
When to descale
Descale the SENSEO
below when the CALC light goes on (after you have
brewed approx. 400 cups of SENSEO
can also descale the SENSEO
®
coffee machine as described
®
®
coffee machine more
coffee). You
often (every 3 months) in the same way. Descaling
takes 20 to 30 minutes. Do not interrupt the
descaling process.
ENGLISH20
Why to descale
Scale builds up inside the machine during use. It is
essential to descale the SENSEO
least every 3 months. Your reasons to descale:
- It prolongs the life of your SENSEO
machine
- It ensures maximum cup volume
- It ensures maximum coffee temperature
- The machine produces less sound during brewing
- It prevents malfunctioning
If the descaling procedure is not performed correctly,
scale residue remains behind in the machine. This
causes scale to build up more quickly and may cause
permanent and irreparable damage to the machine.
Use the correct descaling agent
Only citric acid-based descalers are suitable for
descaling the SENSEO
®
machine. This type of
descaler descales the machine without damaging
it. For the correct amount, see under ‘Descaling
procedure’ below. Each descaling mixture can be
used only once. After use, the descaling mixture is no
longer active.
We advise you to use the special SENSEO
Descaler (HD7012, HD7011, HD7006). For more
information about this descaler, visit our website
www.philips.com.
Never use a descaling agent based on mineral acids
such as sulphuric acid, hydrochloric acid, sulphamic
acid and acetic acid (e.g. vinegar). These descaling
agents may damage your SENSEO
®
coffee machine at
®
coffee
®
®
coffee machine.
ENGLISH 21
Descaling procedure
Descaling cycle
1 Mix 50 grams of citric acid with 1 litre of water
in a measuring jug. Stir until the powder is
completely dissolved.
2 Fill the water reservoir with the descaler
mixture. Then put the water reservoir back
onto the coffee machine.
3 Press the on/off button 3.
, The machine is ready for use when the light ring
lights up continuously.
4 Place the 1-cup pod holder q with a used
coffee pod in it in the coffee machine. Close
the lid and make sure it is properly locked.
It is not possible to descale the machine
when the lid is not properly closed and the lid
lever is not locked. In this case, the indicator
light ashes intermittently.
Note: Always put a used coffee pod in the pod holder
when you descale the machine. This pod serves as a
‘lter’ to prevent the sieve or hole in the pod holder
from getting clogged with scale residue.
5 Put a bowl with a capacity of at least 1500ml
under the spout to collect the descaling
mixture.
6 Press the 1-cup button q and the 2-cup button
qq briey at the same time to start the
descaling cycle.
, The CALC light starts ashing to indicate that
the descaling cycle has started.
ENGLISH22
, Hot water comes out of the coffee spout in
intervals. During the descaling cycle, the machine
stops descaling 3 to 4 times to let the descaler
mixture soak in and to heat up.
Let the machine complete the entire descaling cycle,
which takes 4 to 5 minutes. Do not switch off the
machine during the descaling cycle!
, When all the water in the water reservoir has
been used up, the descaling cycle is nished.
The light ring around the on/off button starts to
ash rapidly.
7 Repeat the descaling procedure (steps 1 to 6)
once. Replace the used pod with another used
pod to lter out the scale residue.
8 Rinse the water reservoir with tap water. Fill
the water reservoir up to the MAX indication
with tap water and repeat steps 3 to 6.
Note: Do not rell the water reservoir with used hot
water or the used descaling mixture.
9 Fill the water reservoir with fresh tap water up
to the MAX indication again and repeat steps
3 to 6 once more.
Note: Always rinse the machine by letting it empty two
full water reservoirs.
10 Remove the used pod and clean the pod holder
after descaling to prevent the sieve in the centre
from getting clogged.
ENGLISH 23
Frost-free storage
After you have ushed the machine for the rst
time (see chapter ‘Before rst use’), it may only
be used and stored in a frost-free place to
prevent damage.
Replacement
You can order all removable parts from your Philips
dealer or a Philips service centre. You can also order
them online at www.support.philips.com.
Environment
- Do not throw away the machine with the normal
household waste at the end of its life, but hand
it in at an ofcial collection point for recycling. By
doing this, you help to preserve the environment.
Guarantee and service
If you need service or information or if you have
a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there
is no Consumer Care Centre in your country, go
to your local Philips dealer.
The purchase of the Philips SENSEO
does not exhaust any of the rights of Sara Lee/
Douwe Egberts or Philips under any of their patents
nor does it confer upon the purchaser a licence
under these patents.
®
coffee machine
ENGLISH24
Troubleshooting
This chapter summarises the most common problems
you could encounter with the machine. If you are
unable to solve the problem with the information
below, contact the Consumer Care Centre in
your country.
Problem Solution
The light
ring around
the on/off
button ashes
slowly.
The CALC light
ashes.
The light ring
around the
on/off button
continues to
ash rapidly.
You have used the SENSEO
altitude higher than 2200 metres above sea level. This
has caused the water in the machine to start boiling
before it has reached the required temperature,
which prevents the machine from functioning
properly. Switch off the machine and no longer use it
at altitudes higher than 2200 metres above sea level.
You have pressed the 1-cup button and the 2-cup
button at the same time. This started the descaling
cycle. If you did not intend to start the descaling
cycle, simply press the on/off button to switch off the
machine. If you did intend to start the descaling cycle,
do not interrupt this cycle but let the appliance
operate until the water reservoir is empty.
Make sure that:
the water reservoir is placed properly;
there is enough water in the water reservoir (i.e.
above the q MIN level if you want to brew 1 cup);
the ambient temperature is not lower than 10°C. If it
is, the machine does not function properly.
®
coffee machine at an
Problem Solution
ENGLISH 25
Water leaks
from the coffee
machine.
I cannot take
the coffee
spout out of
the machine.
I cannot open
the lid.
Make sure that:
the water reservoir has not been lled beyond the
MAX level;
the sieve in the centre of the pod holder is not
clogged. If it is, unclog the sieve by holding the pod
holder under a running tap;
the coffee pod has been put properly in the centre
of the pod holder;
the sealing ring has not got stuck under the edge
of the water distribution disc (see gure 1 at the
beginning of this user manual).
the water drops on the worktop are not the result
of placing or removing the water reservoir or
removing used coffee pods.
you do not remove the water reservoir when the
coffee machine is heating up. This may cause water
that normally ends up in the water reservoir to leak
out of the machine.
In all other cases, contact the Philips Consumer Care
Centre in your country.
You can only remove the coffee spout after you have
removed the coffee collector.
A vacuum may have temporarily formed under
the lid.
ENGLISH26
Problem Solution
Switch off the machine. Pull up the lever as far as it
goes and wait 24 hours before you open the lid.
You may need to use quite some force.
Make sure that the sieve in the centre of the pod
holder is not clogged. If it is, unclog the sieve by
holding the pod holder under a running tap.
If necessary, you can use a washing-up brush to
unclog the sieve.
Make sure you do not move the SENSEO
Moving the machine, placing it outdoors or in a
cool or cold environment does not accelerate the
unlocking of the lid.
Do NOT put the SENSEO
or freezer, as this does not accelerate the unlocking
of the lid.
If problems continue to occur, contact the Philips
Consumer Care Centre in your country.
The coffee
machine
produces less
coffee than
before.
I cannot close
the lid properly.
Perhaps the sieve in the centre of the pod holder is
clogged. If this is the case, unclog the sieve by rinsing
the pod holder under a running tap. Use a washing-up
brush to clean the sieve, if necessary.
Descale the machine (see chapter ‘Descaling’).
Check if a used coffee pod is sticking to the water
distribution disc. If this is the case, remove the used
pod.
Check if you used the correct pod holder. Use 2
pods in combination with the deeper 2-cup pod
holder qq. Use 1 pod in combination with the
1-cup pod holder q.
®
machine.
®
machine in the fridge
Problem Solution
ENGLISH 27
The machine
has been stored
in a room that
was not frostfree.
The SENSEO
®
coffee is not
strong enough.
The SENSEO
®
coffee is too
strong.
Contact the Philips Consumer Care Centre in
your country.
Make sure that:
you have used the correct number of pods and have
pressed the right button. Use 1 pod in combination
with the 1-cup pod holder q and the 1-cup button
q. Use 2 pods in combination with the 2-cup pod
holder qq and the 2-cup button qq;
you have placed the coffee pod(s) properly in the
centre of the pod holder, to prevent water from
escaping along the edge of the pod(s). When
you use two coffee pods on top of each other,
make sure that the convex sides of both pods point
downwards and press the pods lightly into the
pod holder;
you have not used the same coffee pod twice
by accident;
the coffee in the pod is evenly distributed;
If you prefer a more robust avour, SENSEO
pods with a stronger blend are available.
If you prefer a milder avour, SENSEO® coffee pods
with a milder blend are available.
®
coffee
ENGLISH28
Problem Solution
The coffee is
not hot enough.
Water and
steam come
out of
the bottom of
the machine
rapidly.
Do not use cups that are too large, as they cause the
coffee to get cold more quickly. Make sure the cups
have a capacity of at least 150ml.
Your SENSEO
®
machine has a technical malfunction
and has drained all water for safety reasons. The
machine is blocked and does not function anymore.
For assistance, please visit our website
www.senseo.com or take the machine to a Philips
service centre.
DEUTSCH
29
Inhaltsangabe
Einführung 29
Allgemeine Beschreibung 31
Wichtig 31
Erste Anwendung 34
SENSEO
®
Kaffee zubereiten 36
Die Maschine reinigen 40
Entkalken 43
Frostfreie Aufbewahrung 47
Ersatz 47
Umwelt 47
Garantie und Kundendienst 47
Fehlerbehebung 48
Einführung
Herzlichen Glückwunsch zu Ihrem Kauf und
willkommen bei Philips! Um die Unterstützung von
Philips optimal nutzen zu können, registrieren
Sie Ihr Produkt bitte unter www.philips.com/welcome.
Mit SENSEO
Kaffeegenuss. Dieses einzigartige System kombiniert
die einfach zu bedienende Philips SENSEO
Kaffeemaschine mit den speziell von Douwe Egberts
SENSEO
®
erleben Sie einen sensationellen
®
®
entwickelten Kaffeepads: Das Ergebnis ist
eine perfekte Tasse Kaffee mit einem weichen, vollen
Aroma und einer köstlichen Crema.
Kaffee von Douwe Egberts in praktischen SENSEO
Kaffeepads und das einzigartige SENSEO
®
Brühsystem von Philips sind perfekt aufeinander
abgestimmt, sodass sich das volle Aroma des Kaffees
entfalten kann.
Beachten Sie folgende Tipps, um stets den vollen
und aromatischen Kaffeegeschmack zu erhalten:
®
DEUTSCH30
Frisches Wasser
Verwenden Sie täglich frisches Wasser. Wenn die
Kaffeemaschine über drei Tage nicht in Gebrauch
war, lassen Sie vor dem nächsten Aufbrühen frisches
Wasser durchlaufen (siehe Abschnitt “Spülen” im
Kapitel “Reinigung”).
Frische Kaffeepads
Verwenden Sie die speziell von Douwe Egberts
für Ihre SENSEO
SENSEO
Die Douwe Egberts SENSEO
länger frisch, wenn Sie sie in einem luftdichten
Behälter aufbewahren.
Entdecken Sie alle SENSEO
www.senseo.com.
Eine saubere Maschine – neue Spül- und
Entkalkungsfunktionen!
Hinweis: Philips hat die Spül- und
Entkalkungsfunktionen verbessert. Weitere
Informationen dazu nden Sie in den Kapiteln
“Reinigung” und “Entkalken”.
Reinigen und entkalken Sie Ihre Philips SENSEO
Kaffeemaschine regelmäßig.
- Entfernen Sie gebrauchte Kaffeepads nach dem
Brühen. Haben Sie ein Pad in der Kaffeemaschine
gelassen und diese eine Zeit lang nicht benutzt,
sollten Sie das Gerät vor dem erneuten Gebrauch
einmal durchspülen (siehe Abschnitt “Spülen” im
Kapitel “Reinigung”).
- Wenn die Kaffeemaschine über drei Tage nicht in
Gebrauch war, spülen Sie sie vor dem nächsten
Aufbrühen mit frischem Wasser durch
(siehe Abschnitt “Spülen” im Kapitel “Reinigung”).
®
®
Kaffeemaschine entwickelten
Kaffeepads für ein weiches, volles Aroma.
®
Kaffeepads bleiben
®
Kaffeesorten unter
®
Loading...