Philips HD7818, HD7817 User Manual [de]

HD7818 HD7817

2 3 4 5

10 11 12 13

14 15 16 17

18 19 20 21

7 8 9

4222.200.0523.5

ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet from the support that Philips offers, register your product at www.philips.com/welcome. With SENSEO

crema layer whenever you feel like it. Each cup is freshly brewed, so you’re

always sure of a pure and round taste. SENSEO brewing method from Philips with convenient coffee pods from Douwe

Egberts, available in different blends of ne roast and ground coffee. Together they make sure you only get the very best in avour and aroma

from the coffee. The Douwe Egberts coffee in convenient SENSEO unique SENSEO best taste and aroma are extracted from the coffee.

To optimise the taste of the coffee, keep the following aspects in mind:

Clean cold water

Use clean cold water every day. If you have not used the coffee machine for

three days, you have to ush it with clean cold water before you use it again (see section ‘Flushing’ in chapter ‘Cleaning’).

Fresh coffee pods

Use the SENSEO Douwe Egberts for your SENSEO taste. Douwe Egberts SENSEO store them in a storage container.

A clean machine

Clean and descale the Philips SENSEO

(see chapters ‘Cleaning’ and ‘Descaling’). Remove used coffee pods after

brewing. If a used pod has been left in the coffee machine and you have

not used the machine for some time, ush the machine before you use it again (see section ‘Flushing’ in chapter ‘Cleaning’). For more information on why it is important to descale, how to descale or which descaler to use, visit our website at www.philips.com/descale-senseo.

General description (Fig. 1)

1 Water reservoir

2 1-cup pod holder ° 3 2-cup pod holder °°

4 Cover of coffee spout 5 Coffee spout 6 Cup tray 7 Drip tray 8 Indicator light

9 Outow valve

10 Sealing ring 11 Water distribution disc

Important

Read this user manual carefully before you use the machine and save it for

future reference.

Danger

- Never immerse the machine in water or any other liquid.

Warning

- Check if the voltage indicated on the bottom of the machine corresponds to the local mains voltage before you connect the machine.

- This machine can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are 8 years and above and supervised. Keep the machine and its cord out of the reach of children aged less than 8 years.

- Children shall not play with the machine.

- Do not use the machine if the plug, the mains cord or the machine itself is damaged.

- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualied persons in order to avoid a hazard.

- Always put the plug in an earthed wall socket.

Caution

- Always return the machine to a service centre authorised by Philips for examination or repair. Do not attempt to repair the machine yourself,

otherwise your guarantee becomes invalid.

, you can enjoy a perfect cup of coffee with a delicious

combines a unique

brewing system are perfectly matched to ensure that the

coffee pods that have been specially developed by

coffee machine for a full, round

coffee pods stay fresh longer when you

coffee machine regularly

coffee pods and Philips’

- Never put normal ground coffee or use torn pods in the SENSEO® machine, as this causes it to become blocked.

- Do not use the machine in combination with a transformer, as this could cause hazardous situations.

- Always put the machine on a at and stable surface.

- Never let the machine operate unattended.

- Do not use the machine at altitudes higher than 2200 metres above sea level.

- Do not use the machine at a temperature below 0°C.

- Flush the coffee machine with fresh water before you use it for the rst

time (see chapter ‘First use’). This causes the system to ll with water,

which is essential for the machine to work properly.

- Do not use the SENSEO based on sodium exchange.

- Philips strongly advises you to descale this SENSEO

machine in combination with water softeners

regularly. If the

machine is not descaled in time and according to the procedure

described in chapter ‘Descaling’, this may lead to technical failures.

- Never interrupt the descaling process.

- Never use a descaling agent based on mineral acids such as sulphuric

acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar).

These descaling agents may damage your SENSEO

- After unpacking the machine, never put your SENSEO

coffee machine.

machine on

its side. Always keep it in upright position, also during transport.

- The machine is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, ofces,

farms or other work environments. Nor is it intended to be used

by clients in hotels, motels, bed and breakfast and other residential

environments.

Compliance with standards

- This appliance complies with all applicable standards and regulations regarding exposure to electromagnetic elds.

- The energy consumption of this machine in off mode is less than 1 watt. This means that this machine complies with European Directive

2005/32/EC, which sets the ecological design requirements for energy-

using products.

First use Unpacking

1 Remove the machine from the box.

Note: Make sure you store the 2-cup pod holder in a safe place. It is an essential part of the machine.

Flushing the machine to ll the system

You cannot brew coffee if you have not ushed the SENSEO

coffee

machine rst!

The ushing cycle causes the system to ll with water. After this, the coffee

machine is ready for use.

Flush the machine in the following way:

1 Remove the water reservoir (Fig. 2).

2 Fill the water reservoir with clean cold water up to the MAX

indication and put it back onto the machine. (Fig. 3)

3 Move the lever upwards to release the lid (Fig. 4).

4 Open the lid (Fig. 5).

5 Put the 1-cup pod holder ° or the 2-cup pod holder °° in the

machine without pod(s). (Fig. 6)

6 Close the lid and lock the lever (Fig. 7).

Note: Make sure you lock the lever properly. Push it down until it snaps home with a click.

Note: Never ush the machine with the lid open. The lid must be properly

locked.

7 Put the plug in an earthed wall socket.

8 Put a bowl (with a capacity of at least 1500ml) under the coffee spout

to collect the water (Fig. 8).

9 Press the on/off button I and subsequently press the 1-cup button

q and the 2-cup button qq briey at the same time. (Fig. 9)

, The system lls itself with water from the water reservoir. This takes

some time (approx. 90 to 150 seconds). The machine switches off automatically when the ushing cycle ends. During the ushing cycle, the machine produces more noise than during a regular brewing cycle.

Note: Before you use the machine for the rst time, clean the coffee spout and the pod holders with hot water and some washing-up liquid or in the dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with some washing-up liquid.

Now your Philips SENSEO

Brewing SENSEO Tips for the best SENSEO

- Use clean cold water every time.

- Use the SENSEO by Douwe Egberts for your SENSEO

coffee machine is ready for use.

coffee

quality

coffee pods that have been specially developed

coffee machine for a full, round

taste.

Filling the water reservoir

1 Fill the water reservoir with clean cold water up to the MAX

indication and put it back onto the machine. (Fig. 3)

Never pour any other liquid than clean cold water into the water reservoir.

- MIN: minimum amount of water required to brew 1 cup of SENSEO coffee.

- A full reservoir allows you to make SENSEO

coffee a number of times.

This makes it unnecessary to ll the water reservoir each time you want

to make a cup of coffee.

Switching on the machine

1 Press the on/off button I. (Fig. 10)

The indicator light ashes while the water heats up. Heating up takes

approx. 90 seconds.

, The coffee machine is ready for use when the indicator light lights

up continuously.

Placing a pod holder

1 Move the lever upwards to release and open the lid (Fig. 4).

2 Place the SENSEO

holder, with the convex side pointing downwards.

, Place 1 SENSEO

cup of coffee. (Fig. 11)

, Place 2 SENSEO

coffee pod(s) properly in the centre of the pod

coffee pod in the 1-cup pod holder ° to brew one

coffee pods in the 2-cup pod holder °° to brew

two cups of coffee. (Fig. 12)

Note: Use SENSEO your SENSEO

coffee pods from Douwe Egberts specially designed for

coffee machine for a full and round taste.

Note: Make sure the pod holder is clean and the sieve in the centre is not

clogged, e.g. with loose coffee grounds.

Note: Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder.

3 Close the lid and lock the lever (Fig. 7).

Always make sure the lid is properly locked. Push down the lever until it snaps home with a click.

Never start brewing with the lid open. The lid must be properly closed.

4 Place one cup or two cups under the spout openings.

The cups you use should have a capacity of at least 150ml. Do not use cups

that are too large, as they cause the coffee to get cold more quickly.

5 Press the button that indicates the number of cups of SENSEO

coffee you want to brew.

- Press the 1-cup button q for one cup. (Fig. 13)

- Press the 2-cup button qq for two cups. (Fig. 14)

, The SENSEO

coffee machine starts brewing.

- The machine automatically supplies the optimal amount of water.

Do not remove the water reservoir during a brewing cycle, as this will cause the machine to draw in air.

Tip: You can interrupt the brewing cycle at any time. To do this, press the same cup button (1-cup button q or 2-cup button qq) that you pressed to start brewing coffee. However, if you do this, the machine does not complete the interrupted brewing cycle if you switch it on again or press the same cup button again.

6 After use, lift the pod holder out of the machine and remove the

coffee pod(s).

Be careful when you do this, for there may still be some water/coffee on the coffee pod(s).

7 After use, press the on/off button 3 to switch off the machine.

Note: If you do not use the machine, it switches off automatically after 30 minutes to save energy.

Note: Never put normal ground coffee or use torn pods in the SENSEO

machine, as this causes it to become blocked.

Cleaning the machine

Never immerse the SENSEO® coffee machine in water or any other liquid.

Never clean the machine by ushing it with the lid open.

Cleaning the coffee machine

1 Always unplug the machine before you clean it.

2 Clean the outside of the machine with a moist cloth.

3 Remove the coffee spout (Fig. 15).

, You can disassemble the coffee spout for more thorough

cleaning (Fig. 16).

4 Clean the coffee spout, the pod holders, the drip tray, the cup tray

and the water reservoir in hot water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 17).

5 To prevent clogging, clean the pod holders regularly with hot water,

some washing-up liquid and a washing-up brush. If you have used the 2-cup pod holder to brew cappuccino or hot chocolate, make sure to clean it thoroughly immediately after use to remove any milk residues (Fig. 18).

Note: Use the clogged pod holder in the machine during descaling to clean it

even more effectively.

6 Clean the water distribution disc with a moist cloth (Fig. 19).

Be careful when you do this. Make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine starts to leak.

Flushing the coffee machine

If you have not used the coffee machine for three days, ush it with clean

cold water before you use it again.

Flush the machine in the following way:

1 Fill the water reservoir with clean cold water up to the MAX

indication and put it back onto the machine. (Fig. 3)

2 Put the 1-cup pod holder ° or the 2-cup pod holder °° in the

machine without pod(s). (Fig. 20)

3 Put a bowl (with a capacity of at least 1500ml) under the coffee spout

to collect the water (Fig. 8).

4 Press the on/off button I. Wait until the machine has heated up.

Then press the 2-cup button qq several times until the water reservoir is empty. (Fig. 21)

+ 7 hidden pages