Coffee maker ”Café Essence”
Service |
HD 7603/4 |
|
|
Service |
|
Service |
|
Philips Domestic Appliances and Personal Care
PRODUCT INFORMATION
Voltage |
: |
100, 120, 230V |
|
Frequency |
: |
50 - 60Hz |
|
Power consumption : |
850 + 550W |
||
Contents jug |
: |
1200cc |
|
Coloursetting |
: |
stone grey |
|
SERVICE INFORMATION |
|
||
Thermostat switch-off temp |
: 140°C |
||
Thermal fuse |
cut-off temp |
: 298°C |
REPAIR INSTRUCTIONS
1.Electrical circuit
When the appliance does not work, check the electrical circuit. If the thermal fuse or thermostat prove defective, the complete pump unit has to be replaced.
2.De-scaling
If the water system is nearly or less clogged by scale then operate the coffeemaker a few times with vinegar or with a 10-15% solution of either vinegar-acid, citric acid or tartar-acid, into cold tap water.
Do not use other de-scaling agents as these may harm the appliance.
If this procedure does not restore the function, then switch off the coffeemaker when the acid has passed through during appr. 3 min. Keep the appliance in this condition overnight and continue/repeat the cleaning operation. After the de-scaling procedure, operate the coffeemaker twice with tap water in order to rinse away any residual substances.
SAP coding HD 7603/4 |
|
ROTARY |
|
SWITCH |
|
850W |
550W |
3.Pump unit removal
To separate the pump unit from the hotplate unit, the two plastic snaps at place A have to be loosened. Then the pump unit can be lifted out easily.
4.Exchanging the switch unit
Remove the panel (13) by carefully pushing a small screwdriver into the chink at point A and moving it towards to point B (see exploded view). Do not damage the housing. If the panel has been damaged, get a new one.
PRODUCTS MEETS THE REQUIREMENTS REGARDING INTERFERENCE SUPPRESION ON RADIO AND TELEVISION.
-AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD FUNCTION PROPERLY AND HAS TO MEET THE SAFETY REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED AT THIS MOMENT.
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands © Copyright reserved Subject to modification
4322 277 00288
00/04
PCS 104 805
HD 7603/4
1
2
3
5
13 |
|
11 |
|
6 |
9 |
MAX |
7 |
4 |
|
5 |
|
3 |
|
MIN |
|
10 15 |
|
8 |
|
6
27
|
|
|
4 |
|
|
|
|
|
15 |
|
|
|
|
16 |
|
|
|
|
17 |
|
|
|
|
18 |
|
|
|
8 |
19 |
|
|
|
|
|
|
|
|
9 |
20 |
|
|
|
|
|
|
|
|
10 |
|
|
|
A |
|
|
|
|
B |
|
A |
|
|
|
A |
22 |
|
|
|
|
|
|
|
|
25 |
24 |
|
|
|
|
|
|
|
|
|
21 |
11 |
12 |
13 |
14 |
|
7
26
1 |
4222 247 35040 |
Tank lid (indicator) |
stone grey |
2 |
4222 247 58540 |
Disc |
zinc brown |
3 |
4222 247 58530 |
Spout |
zinc brown |
4 |
4222 259 00880 |
Dosing indicator assy |
stone grey |
5 |
4222 247 35050 |
Rim |
stone grey |
6 |
4222 246 22830 |
Cord Euro |
black |
7 |
4222 462 40374 |
Stud |
|
8 |
4222 247 58440 |
Jug lever |
zinc brown |
9 |
4222 247 55870 |
Spout pipe |
|
10 |
4222 247 56350 |
Switch casing |
|
|
|
|
|
11 |
4822 273 10333 |
Rota switch |
|
12 |
4222 246 25380 |
Switch on/off |
zinc brown |
13 |
4222 259 00420 |
Switch panel |
stone grey |
14 |
4222 247 58490 |
Rota button |
zinc brown |
15 |
4222 259 01400 |
Filterholder assy 1) |
zinc brown |
|
|
|
|
16 |
4222 240 06060 |
Dripstop spring |
|
17 |
4822 532 52489 |
Ring |
|
18 |
4222 247 58560 |
Dripstop |
zinc brown |
19 |
4222 247 58260 |
Jug lid |
zinc brown |
20 |
4822 418 10429 |
Jug assy 2) |
zinc brown |
21 |
4222 259 28090 |
Pump assy |
|
22 |
4222 259 29620 |
Hotplate assy |
|
24 |
4822 360 50864 |
Valve |
|
25 |
4822 532 21371 |
Hose piece |
|
26 |
4822 492 71174 |
Wire spring |
|
|
|
|
|
27 |
4222 247 40210 |
Spoon |
black |
28 |
4222 001 91890 |
D.F.U. |
|
|
|
GBR, FRA, GER, NLD, ESP, PRT |
|
|
|
DNK, NOR, SWE, FIN, GRC, TUR. |
|
|
|
|
|
1) Optional part for use as an insert in item 15:
4822 480 50479 Permanent filter nylon
4822 480 10107 Permanent filter stainless steel
4822 480 50402 Permanent filter gold
2) Commercial trade number of the jug HD 7952
PCS 104 805