한국어 제품 사용 전 매뉴얼을 숙지해 주시기 바라며, 향후
사용시 참고를 위해 매뉴얼을 잘 보관해 주시기
바랍니다.
English
EN
Before you start
Thank you for buying Philips
GoPure Car air purier. Before
you install GoPure in your car,
take time to read this guide.
The GoPure Car air purier will
help you protect your health
by improving the quality of
the air you breathe in your car.
It is known that air pollution
levels inside cars are often
much higher than outside.
The GoPure Car air purier
removes harmful gases
and ne particles such as
microorganisms. It also
reduces bad odors to make
the time in your car more
pleasant and healthier.
Warranty and service
The Lumileds warranty
applies, provided:
• The product is handled
properly for its intended use only.
• The product is used in
accordance with its
operating instructions.
• You present the original
invoice with the product.
The Lumileds warranty does not
apply if the product is damaged
due to accident, error, or misuse.
For more information and
assistance, or if you have a
problem with the product, you
can visit the Philips website at
www.philips.com/automotive,
or contact the retail outlet
where you purchased the product.
Or for users in China, please
call the service hotline:
400 690 8826
Do not clean or spill
any liquids such as
water, detergents, or
ammable solvents on
the device.
m Warning
Keep Philips GoPure
free of any object. Do
not cover!
m Important
To clean the GoPure:
• Disconnect GoPure
• Use soft cloth only.
4
m Warning
Philips GoPure is not a
toy! Do not let children
play with it.
m Warning
For your safety, do not
operate your GoPure
while driving.
Always park your car rst!
m Warning
Philips GoPure device
contains high-precision
technology, dropping
may damage the device.
Environment
Protection
m Important
Let’s commit to protect
the environment. Do
not discard the device
with household waste.
Bring it to the ocial
waste recycling service
near by you. Filters may
be disposed of with
household waste.
Cautions:
• this appliance can
be used by children
aged from 8 years and
above and persons
with reduced physical,
sensory or mental
capabilities or lack
of experience and
knowledge if they have
been given supervision
or instruction
concerning use of the
appliance in a safe way
and understand the
hazards involved
• children shall not play
with the appliance
• cleaning and user
maintenance shall not
be made by children
without supervision
• the appliance is only
to be used with the
detachable power
supply provided
• must only be supplied
at SELV
2 Discover GoPure car air purier
SelectFilter
(unpack rst)
Air inlet
Fan
Air outlet
12V power adaptor
2.1 Discover the content of Philips GoPure package
Armrest &
headrest
X1
safety belt
Top cover
open button
m Warning
Make sure the device is
installed according to the
instructions in this guide.
For your safety, please use the
items delivered in this package
only to install the device.
Never use other equipment, such
as tape, cord, or other.Lumileds
declines all responsibility for
any harm or accident in case of
incorrect installation.
5
3 Install and use Philips GoPure car air purier
in your car
3.1 Installation-using the
headrest or armrest
1 Place the safety belt over
the device as shown.
2 You may install Philips
GoPure on front seat headrest
or armrest of your car.
6
Notice:
1 The safety belt may not be
suitable to the armrest of all
car models.
2 Unpack the lter before using
3.2 Connection and operation
1 Connect the power adapter
to a 12V outlet in your car.
When the car power supply
on, the device starts running
automatically.
When the car power supply
o, the device turns o
automatically.
m
Warning
In case of some cars continue
to power the 12V outlet when
the engine is o. Please
disconnected the device with
12V outlet before leaving to
prevent draining the battery.
0
m
Important
When using Philips GoPure
• Keep car air-condition in
low ventilation speed for
external circulation mode
to prevent from external
pollutants get into car.
• Keep car windows closed.
m Warning
For your safety, do not try
to switch o or operate the
device while driving.
Always park your car rst!
3.3 Filtration performance
and lter
Philips GoPure Car air purier
is composed
of a multi-layer ltration
system that guarantees the
most eective air-purication.
All lter layers are assembled
in one single simple-toreplace lter.
High air purication power
Product air cleaning
performance
level)
Important
Clean air
delivery
rate
(CADR)
52dB(A)
Target
High
eciency
High
eciency
Target
pollutant*
Particles15m3/h
TVOC7m3/h
Noise*
(Sound
power
Complying with GB/T18801-2015,
*
tested in 3m3 chamber
m
Please replace the lter every
6 months.
Replace the lter immediately
using only genuine Philips
GoPure SelectFilter Plus.
It helps maintain the maximal
performance of your GoPure
Car air purier and helps to
provide the purest air quality
inside your car.
7
How to replace the lter
1 Disconnect GoPure car air
purier device.
4 Using the groove,insert a
new original GoPure lter.
2 Push the top cover open
button and take o top cover.
3 Remove the old lter
as shown.
8
5 Close the top cover,
the device starts running
automatically once
12V power supplied.
m
Important
The lter slides in only one
way, do not force it in.
See above.
4 Philips GoPure car air purier troubleshooting
Problem 1
Philips GoPure car air purier
does not start.
Solution 1
• Verify that the 12V power
supply is on.
• Check the power connection
and make sure the socket is
properly inserted.
If your device still does not
restart, please contact your
retailer.
Problem 2
Some cars continue to power
the 12V outlet when the
engine is o.
Solution 2
Please disconnected the
device with 12V outlet before
leaving to prevent draining
the battery.
Problem 3
Philips GoPure car air
purier has been running
for a long time, yet my new
car continues to produce
unpleasant odor.
Solution 3
Some unpleasant odor in
new cars may come out
continuously from a variety
of sources. The GoPure car air
purier continues to purify the
air; however, some odors may
be produced continuously.
GoPure car air purier
reduces the air pollutants
considerably.