8
Connect GoGear Aria to a computer
1 Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2 Connect the small USB plug of the USB
cable to the small USB jack on GoGear
Aria.
3 Turn on your computer.
GoGear Aria charges. »
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
A ashing battery screen indicates that »
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
Rechargeable batteries have a limited number •
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
The charging animation stops and the
•
icon is displayed when the charging process is
completed.
Tip
You can conserve battery power and increase •
the play time of the GoGear Aria if you go to
> [Display settings] > [Screen off timer]
and ensure that the shortest timer setting is
selected.
Install software
GoGear Aria comes with the following
software:
Philips Device Manager (helps you get •
rmware updates for GoGear Aria)
Media Converter for Philips (helps you •
convert and transfer video les for
GoGear Aria)
Windows Media Player (helps you •
convert and transfer WMP media les for
GoGear Aria)
Important:
Remember to install the software provided in
the supplied CD-ROM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1 Connect GoGear Aria to your computer.
2 Insert the CD that comes with GoGear
Aria into the CD-ROM drive of your
computer.
3 Follow the on-screen instructions to
complete the installation of the software.
If the installation program fails to start
automatically:
1 Browse the CD contents with Windows
Explorer.
2 Double click on the le that ends with
‘.exe’.
Connect and charge
GoGear Aria has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
For rst-time use, allow GoGear Aria to •
charge for 3 hours.
The charging animation stops and the
•
icon is displayed when the charging process is
completed.
EN