PHILIPS GC9550-02 User Manual

GC9500 GC9200

User manual

IMPORTANT:

Perform descaling regularly for great steam and prolonged life.

WICHTIG:

Entkalken Sie regelmäßig, um eine gute Dampeistung und eine lange

Nutzungsdauer zu gewährleisten.

IMPORTANT :

effectuez régulièrement un détartrage pour une vapeur de qualité et une durée de vie prolongée.

IMPORTANTE:

eseguite regolarmente la procedura di decalcicazione per avere

maggiore vapore e maggiore durata del ferro.

BELANGRIJK:

regelmatig ontkalken zorgt voor goede stoom en een langere levensduur.

ENGLISH 6 DEUTSCH 12 FRANÇAIS 18 ITALIANO 24 NEDERLANDS 30

GC9500,GC9200 series

ENGLISH

Introduction

This iron has been approved by The Woolmark Company Pty Ltd for the ironing of wool only products provided that the garments are ironed according to the instructions on the garment label and those issued by the manufacturer of this iron. R1101. In United Kingdom, Eire, HongKong and

India, the Woolmark trademark is a Certication trademark.

General description (Fig. 1)

1 Steam supply hose 2 Iron platform 3 Supply hose storage

compartment 4 Cord storage compartment 5 Mains cord with plug 6 ‘Water tank empty’ light 7 On/off button with ECO mode 8 EASY DE-CALC light 9 EASY DE-CALC knob

Important

ead the separate important information leaet and the user manual carefully

before you use the appliance. Save both documents for future reference.

Preparing for use

10 Water level indication 11 Detachable water tank 12 Filling hole 13 Carry lock release button

(specic types only)

14 Carry lock (specic types only)

15 Soleplate 16 ’Iron ready’ light 17 Steam trigger 18 Steam boost button

Filling the detachable water tank

Do not put hot water, perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank.

Fill the water tank before use and as soon as the ‘water tank empty’

light ashes.

1 Remove the detachable water tank from the steam generator and

ll the water tank with tap water.

Note: Your appliance has been designed to be used with tap water. If you live in an area with very hard water, fast scale build-up may occur. In this case, it is recommended to mix 50% distilled water and 50% tap water to prolong the life of your appliance.

2 Slide the water tank back into the steam generator (‘click’).

’Water tank empty’ light

When the water tank is almost empty, the ‘water tank empty’ light goes on and steam ironing is no longer possible. Fill the water tank to continue steam ironing.

ENGLISH 7

Using the appliance

OptimalTemp technology

Do not iron non-ironable fabrics.

This steam generator is equipped with OptimalTemp technology, which enables you to iron all types of ironable fabrics without adjusting the iron temperature or steam setting.

- Fabrics with these symbols are ironable, for example linen, cotton, polyester, silk, wool, viscose and rayon.

- Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as Spandex or elastane, Spandex-mixed fabrics and

polyolens (e.g. polypropylene), but also prints on garments.

Ironing

1 Place the steam generator on a stable and even surface. 2 Make sure that there is enough water in the water tank (see section

‘Filling the detachable water tank’).

3 Put the mains plug in an earthed wall socket and press the on/off

button to switch on the steam generator. The ‘iron ready’ light starts to ash, to indicate that the steam generator is heating up (this takes approx. 2 minutes).

, When the ‘iron ready’ light lights up continuously, the steam

generator is ready for use.

4 Specic types only: Press the carry lock release button to unlock

the iron from the iron platform.

ENGLISH8

5 Press and hold the steam trigger to start Ironing.

Keep the trigger constantly pressed when moving the iron over the fabric.

Never direct steam at people.

Steam boost function

There are two steam boost functions for removing stubborn creases.

- Press the steam boost button for extra-strong steam output.

- Press the steam trigger twice quickly for a high continuous steam output. You do not have to press the steam trigger continuously, which gives a more comfortable ironing experience.

Vertical steam ironing

Hot steam is emitted from the iron. Never attempt to remove creases from a garment that someone is wearing. Do not apply steam near your or someone else’s hand.

You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.

1 Hold the iron in vertical position, press the steam trigger and touch

the garment lightly with the soleplate.

Putting down the iron during ironing

- During ironing, you can place the iron either on the iron platform or horizontally on the ironing board. Thanks to the OptimalTemp technology, the soleplate will not damage the ironing board cover.

ENGLISH 9

Energy saving

ECO mode

By using ECO mode (reduced amount of steam), you can save energy

without compromising on the ironing result.

1 To activate the ECO mode, press and hold the on/off button for

2 seconds. The light turns green.

2 To switch back to the ‘OptimalTemp’ setting, switch the steam

generator off and on again.

Safety Auto-off (specic types only)

The Safety Auto-off function automatically switches off the appliance if it has not been used for 10 minutes, to save energy.

IMPORTANT - Cleaning and maintenance

IMPORTANT - Descaling the steam generator

To ensure a long life for your steam generator, it is very important that you perform the descaling procedure when the EASY DE-CALC light

starts to ash.

- The EASY DE-CALC light starts ashing after approx. one month or 10 ironing sessions to indicate that the steam generator needs to be descaled. To descale the steam generator, perform the steps below.

Never remove the EASY DE-CALC knob when the steam generator is hot.

1 Press the on/off button to switch off the steam generator and

remove the plug from the wall socket.

2 Place the steam generator on a stable table with the EASY

DE-CALC knob sticking out beyond the edge of the table or take the steam generator to a sink.

3 Hold a cup under the EASY DE-CALC knob. Turn the EASY

DE-CALC knob anti-clockwise and let the water with scale particles

ow into the cup. When no more water comes out of the steam

generator, reinsert the EASY DE-CALC knob. Turn the knob clockwise to fasten it and put the plug back into the socket again.

You can now use the steam generator again.

ENGLISH10

Cleaning the soleplate

Clean the soleplate regularly to remove stains from the soleplate.

- To maintain a good gliding of your soleplate, it is recommended to clean it regularly (once every 2 months). You can do that by heating up the iron and moving the soleplate over a moist cloth.

- Descaling the soleplate: if you do not descale your steam generator regularly, scale may build up on the soleplate. You can remove scale by following the instructions below:

1 Descale the steam generator before you clean the soleplate

(see section ‘IMPORTANT - Descaling the steam generator’).

2 Tilt the steam generator and pour 500ml distilled water into the

opening. Reinsert the EASY DE-CALC knob and turn the knob clockwise to fasten it.

3 Press the on/off button and wait for 5 minutes.

4 Put a piece of thick cloth on your ironing board. Place your iron on

the cloth, press and hold the steam trigger. While pressing the steam trigger, slowly move the iron back and forth across the cloth until no water comes out anymore or when steam comes out.

Hot, dirty water comes out of the soleplate.

5 Switch off the steam generator and let it cool down for 2 hours. 6 Remove the EASY DE-CALC knob and let the water ow into a cup.

Reinsert the EASY DE-CALC knob and turn the knob clockwise to fasten it.

Storage

1 Switch off the steam generator and unplug it. 2 Remove the water tank and empty it. 3 Put the iron on the iron platform. Specic types only: push the carry

lock to lock the iron onto the platform.

4 Fold the supply hose and mains cord. Put them in their respective

storage compartments.

5 Specic types only: You can carry the appliance with one hand by the

handle of the iron.

Do not carry the appliance by holding the water tank release lever.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country.

Problem Possible cause Solution

ENGLISH

The ironing board cover becomes wet.

Water droplets come out of the soleplate.

Steam and/or water comes out from under the EASY DE-CALC knob.

Dirty water and impurities come out of the soleplate.

The iron leaves a shine or an imprint on the garment.

The steam generator does not produce any steam.

The steam generator produces a pumping sound.

Steam has condensed on the ironing board cover after a long ironing session.

The steam that was still present in the hose has cooled down and condensed into water.

The EASY DE-CALC knob is not tightened properly.

Impurities or chemicals present in the water have deposited in the steam vents and/or on the soleplate.

Too much scale and minerals have accumulated inside the steam generator.

The surface to be ironed was uneven, for instance because you were ironing over a seam or a fold in the garment.

There is not enough water in the water tank (the ‘water tank

empty’ light ashes).

The steam generator is not hot enough to produce steam.

You did not press the steam trigger.

The water tank is not placed properly in the steam generator.

Water is pumped into the boiler inside the steam generator. This is normal.

Replace the ironing board cover if the foam material has worn out. You can also add an extra layer of felt material under the ironing board cover to prevent condensation on the ironing board.

Point the iron away from the garment and let it produce steam for a few seconds.

Switch off the appliance and wait for two hours for steam generator to cool down. Unscrew the EASY DE-CALC knob reattach it properly. Note: When you remove the knob, water comes out of the steam generator. If steam continues to escape, switch off the appliance and contact an authorised Philips service centre.

Descale the steam generator regularly. See section ‘Cleaning the soleplate’ in chapter ‘Cleaning and maintenance’.

Descale the steam generator regularly. See section ‘IMPORTANT - Descaling the steam generator’ in chapter ‘Cleaning and maintenance’.

PerfectCare is safe on all garments. The shine or imprint is not permanent and will come off if you wash the garment. Avoid ironing over seams or folds or you can place a cotton cloth over the area to be ironed to avoid imprints.

Fill the water tank.

Wait until the ‘iron ready’ light on the iron lights up continuously.

Press the steam trigger and keep it pressed while you steam iron.

Slide the water tank rmly back into the steam generator (‘click’).

If the pumping sound continues nonstop, switch off the steam generator and remove the plug from the wall socket. Contact an authorised Philips service centre.

DEUTSCH

Einführung

Dieses Bügeleisen wurde von der Woolmark Company Pty Ltd nur für das Bügeln von Wollprodukten genehmigt, vorausgesetzt dass die Kleidungsstücke gemäß den Anweisungen auf dem Etikett des Kleidungsstücks und den Anweisungen vom Hersteller dieses Bügeleisens gebügelt werden. R1101. In Großbritannien, Irland, Hongkong und Indien ist das Woolmark-Warenzeichen eine Gütemarke.

Allgemeine Beschreibung (Abb. 1)

1 Verbindungsschlauch

2 Bügeleisen-Abstelläche

3 Schlauchaufbewahrungsfach 4 Kabelfach 5 Netzkabel mit Stecker 6 Anzeige “Wassertank leer” 7

Ein-/Ausschalter mit ECO-Modus 8 EASY DE-CALC-Anzeige 9 EASY DE-CALC-Verschluss 10 Wasserstandsanzeige

Wichtig

Lesen Sie das beiliegende Merkblatt mit wichtigen Informationen und

die Bedienungsanleitung vor der Verwendung des Geräts sorgfältig durch. Bewahren Sie beide Dokumente zur späteren Verwendung auf.

11 Abnehmbarer Wassertank 12 Einfüllöffnung 13

Entriegelungstaste für Transportver-

riegelung (nur bei bestimmten Typen)

14 Transportverriegelung (nur

bestimmte Gerätetypen)

15 Bügelsohle 16 Bereitschaftsanzeige 17 Dampfauslöser 18 Dampfstoß-Taste

Für den Gebrauch vorbereiten

Den abnehmbaren Wassertank füllen

Füllen Sie niemals heißes Wasser, Parfüm, Essig, Wäschesteife, Entkalkungsmittel, Bügelzusätze oder andere Chemikalien in den Wassertank.

Füllen Sie den Wassertank vor der Verwendung und wenn die Anzeige

“Wassertank leer” aueuchtet.

1 Nehmen Sie den abnehmbaren Wassertank von der Dampfeinheit,

und füllen Sie den Wassertank mit Leitungswasser.

Hinweis: Ihr Gerät ist für die Verwendung von Leitungswasser vorgesehen. Wenn Sie in einer Region mit sehr hartem Wasser leben, können sich schnell Kalkablagerungen bilden. In diesem Fall wird empfohlen, den Wassertank zu 50 % mit destilliertem Wasser und zu 50 % mit Leitungswasser zu füllen, um die Lebensdauer Ihres Geräts zu verlängern.

2 Schieben Sie den Wassertank wieder in die Dampfeinheit, bis er mit

einem “Klick” hörbar einrastet.

Anzeige “Wassertank leer”

Wenn der Wassertank fast leer ist, leuchtet die Anzeige “Wassertank leer”, und Dampfbügeln ist nicht mehr möglich. Füllen Sie den Wassertank, um das Dampfbügeln fortzusetzen.

+ 26 hidden pages