Philips GC3920-24 Specifications Sheet

Philips PerfectCare
Steam iron

2500W

45 g/min continuous steam
180 g steam boost
SteamGlide Plus soleplate

GC3920/20

Easier and faster without temperature settings

100% safe, even on delicate fabrics

Now you can iron everything from jeans to silk in one go with OptimalTEMP technology
giving you the perfect combination of heat and steam - for faster crease removal with no
risk of burn or shine marks.

Carefree ironing, no temperature setting required

• OptimalTEMP technology, no temperature settings required

• Safe on all ironable garments, no-burns guaranteed

Easy & fast ironing

• 2500 W to heat up quickly

• Steam output up to 45 g/min for strong, steady performance

• Up to 180 g steam boost blasts stubborn creases

• SteamGlide Plus soleplate for ultimate gliding performance

Comfortable ironing

• Automatic shut-off when iron is left unattended

• Drip-stop keeps garments spotless while ironing

• Built-in calc-clean slider, long-lasting steam performance

GC3920/20

Steam iron

2500W 45 g/min continuous steam, 180 g steam boost, SteamGlide Plus soleplate

Highlights

No temperature setting needed

Iron everything from silk to jeans without
adjusting the temperature. Thanks to
OptimalTEMP, no dial or settings are needed.
So there’s no more pre-sorting the laundry, or
waiting for the iron to heat up and cool down.
You're ready for any fabric, anytime.

No burns – guaranteed

Continuous steam up to 45g/min

Strong and consistent steam output to remove
creases faster

Steam boost up to 180 g

Automatic shut-off

The iron shuts itself off if you leave it standing
still. On its heel rest, soleplate or side, it will
automatically switch off after 2 minutes.

No more messy dripping

Thanks to OptimalTEMP technology, we
guarantee this iron will never cause burns to
any ironable fabric. You can even leave it
resting face down on your clothes or ironing
board. No burns, no shine. Guaranteed.

2500 W to heat up quickly

Delivers a fast warm-up and powerful
performance.

Penetrates deeper into fabrics to easily
remove stubborn creases.

SteamGlide Plus soleplate

Our exclusive SteamGlide Plus soleplate – with
its advanced titanium layer and 6-layer coating
– delivers ultimate gliding performance over
any fabric. Non-stick, scratch-resistant and
easy to keep clean.

Our Drip Stop system lets you iron delicate
fabrics at low temperatures with confidence.
There’s no need to worry about water
droplets causing stains.

Philips Green Logo

Philips Green Products can reduce costs,
energy co
How? They offer a significant
environmental improvement in one or
more of the Philips Green Focal Areas –
Energy efficiency, Packaging, Hazardous
substances, Weight, Recycling and
disposal and Lifetime reliability.

nsumption and CO2 emissions.