Steam iron
EasySpeed
1800W
20 g/min steam
70g steam boost
GC1020/79
Fast, from start to finish
3 ways to speed up your ironing
This EasySpeed iron speeds up your ironing thanks to: triple precision tip, even
heat distribution across the soleplate and continuous steam.
Easily removes creases
Power up to 1800 W enabling constant high steam output
Steam boost up to 70g
Continuous steam up to 20 g/min for better crease removal
Non-stick soleplate coating
Longer lifetime
Calc clean slider to easily remove scale out of your iron
Comfortable ironing
Triple precision tip for optimal control and visibility
Even steam distribution for efficient ironing
A fine spray evenly moistens the fabric
Steam iron
GC1020/79
Highlights
Power up to 1800 W
Power up to 1800 W enables constant high
steam output.
Steam boost
The iron's 70 g steam boost enables you to
easily remove even the most stubborn creases.
Continuous steam up to 20g/min
Continuous steam up to 20 g/min for better
crease removal.
Non-stick soleplate
The soleplate of your Philips iron is coated
with a special non-stick layer for good gliding
performance on all fabrics.
Calc clean slider
This steam iron can be operated with normal
tap water and the calc clean slider makes it
easy to remove any built-up scale out of your
iron. To maintain the performance of your
Phili ps steam iron, you should use this scale
clean function once a month when using
normal tap water.
Triple precision tip
The tip of this Philips iron is precise i n 3 ways:
it has a pointed tip, button groove and a sleek
design of the nose. Triple Precision tip enables
you to reach even into the most tricky areas,
e.g. around the buttons or between the pleats.
Even steam distribution
Thanks to the carefully crafted soleplate
design, the steam is distributed evenly across
the soleplate. This way you need less strokes
to evenly moisten the garment and therefore
less time to complete the ironing.
Spray
The spray function produces a fi ne mist that
evenly moistens the fabric, making it easier to
iron out creases.
Loading...