Philips GC1020-70 User Manual

Philips EasySpeed
Steam iron with Non-stick
soleplate

Steam 20g/min; 70g steam boost

Non-stick soleplate
Anti-calc
1800 Watts

GC1020/70

Fast, from start to finish

3 ways to speed up your ironing

The EasySpeed iron speeds up your ironing thanks to: triple precision tip, even heat
distribution across the soleplate and continuous steam.

Easily removes creases

• Power up to 1800 W enabling constant high steam output

• Steam boost up to 70 g

• Continuous steam up to 20 g/min for better crease removal

• Non-stick soleplate coating

Longer lifetime

• Calc clean slider to easily remove scale out of your iron

Comfortable ironing

• Triple precision tip for optimal control and visibility

• Even steam distribution for efficient ironing

• A fine spray evenly moistens the fabric

GC1020/70

Steam iron

Steam 20g/min; 70g steam boost Non-stick soleplate, Anti-calc, 1800 Watts

Highlights

Power up to 1800 W

Power up to 1800 W enables constant high
steam output.

Steam boost

Non-stick soleplate

The soleplate of your Philips iron is coated
with a special non-stick layer for good gliding
performance on all fabrics.

Calc clean slider

Triple precision tip

The tip of this Philips iron is precise in 3 ways:
it has a pointed tip, button groove and a sleek
nose design. The triple precision tip enables
you to reach even the most tricky areas, e.g.
around the buttons or between the pleats.

Even steam distribution

Thanks to the carefully crafted soleplate
des

ign, the steam is distributed evenly across
the soleplate. This way you need fewer strokes
to evenly moisten the garment and therefore
less time to complete the ironing.

The iron's 70 g steam boost enables you to
easily remove even the most stubborn creases.

Continuous steam up to 20 g/min

Continuous steam up to 20 g/min for better
crease removal.

Spray

This steam iron can be operated with normal
tap water, and the calc clean slider makes it
easy to remove any built-up scale from your
iron. To maintain the performance of your
Philips steam iron, you should use this scale
clean function once a month when using
normal tap water.

The spray function produces a fine mist that
evenly moistens the fabric, making it easier to
iron out creases.