Philips FW-R33 User Manual
Philips CDR Mini Hi-Fi System FW-R33/R55:Getting started…
English
RL
LINE
OUT
AUX/
CDR
IN
SUBWOOFER
OUT
AM ANTENNA FM ANTENNA
AC
MAINS
~
8 m
m
1
2
3
Plug and Play
When you switch on the power supply for the first
time, Plug and Play allows you to store all available
radio stations automatically.
1 Press ÉÅ to start storing.
2 Storing stops when all available stations have been
stored or the memory for 40 presets is full.The last
stored radio station will be played.
Demonstration mode
The demonstration mode displays various features of
the unit and will start automatically.
00
To switch off the demonstration mode, keep Ç
pressed for at least 5 seconds.
➜ The unit switches to standby.
General information
This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Power
1 Check whether the power voltage as shown on the
type plate corresponds to your local power voltage.
If it does not, consult your dealer or service
organization.
2 After all connections have been made, connect
the power cord to AC MAINS ~ and to the wall
power outlet.This switches on the power supply.
To disconnect the unit from the power
completely,remove the power plug from the wall
power outlet.
Discs for recording
Use discs with the “Digital Audio”logo only:
– CD-Audio Recordable (CDR) discs,or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording will not work properly.
Discs for playback
Note:MP3 playback works only if the file names end
with .mp3
playback standard CDRW Philips CDR
in: CD player compatible Mini Hi-Fi
disc: CD player System
finalized CDR
●● ●
finalized CDRW ●●
unfinalized CDR
●
or CDRW
MP3CD
●
English
Philips CDR Mini Hi-Fi System FW-R33/R55:Getting started…
3103 306 1785.1 Printed in China EL6488E001 / VieUrs0117
OPEN CLOSE
CD3
CD2
CD1
1 Press OPEN·CLOSE and insert a CD
into a tray.Close the drawer by pressing
OPEN·CLOSE again.
3 PressÉÅ to start playback.2 Select the tray
by pressing CD1,
CD2 or CD3.
Playing a CD in the CD changer
Finalizing manually
YES
ENTER
CD RECORDER
CDR OPEN CLOSE
FINALIZE
CD
1 Insert the CDR(W)
to be finalized into
the CD recorder.
2 Press
FINALIZECD
.
3 Press YES to start
the finalization.
Recording an entire CD
COPY
CD
YES
ENTER
CDR OPEN CLOSE
CD RECORDER
OPEN·CLOSE
CD3
CD2
CD1
CD RECORDER
CDR OPEN CLOSE
OPEN·CLOSE
CD3
CD2
CD1
RECORD
YES
ENTER
JOG
CONTROL
Recording a single track
1 Insert an Audio
CDR(W) into the
CD recorder tray.
3 Select the track
by rotating íJOG
CONTROLë.
4 Press
RECORD.
5 Press YES to
start recording.
2 Insert a CD into the
CD changer and
select the CD tray.
2 Insert the CD to be
copied into the
CD changer and
select the CD tray.
1 Press CDR OPEN·CLOSE and
insert a blank Audio CDR(W) into
the CD recorder tray.
3 Press
COPY CD.
4 Press YES to start
CD recording.
The CD will be
finalized automatically.
Loading...