Philips FWP78P37, FWP78P User Manual

Download

Page 1

3139 116 19452 (ENG)

Toll Free Help Line

Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo

800-531-0039

Mini Hi-Fi System

FW-

P78

with 3 CD changer

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM1

Page 2

3139 116 19452 (ENG)

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is registered, you’re eligible to receive all the privileges of owning a Philips product.

• So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

Warranty

Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty.

Owner

Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model

Registration

Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION:

To prevent electric shock, match wide

blade of plug to wide slot, and fully insert.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No. _______________________________

Serial No. ________________________________

Know these

ssaaffeettyy

symbols

MAC5097

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM2

Page 3

3139 116 19452 (ENG)

Visit our World Wide Web Site at http://www.philipsusa.com

Thank you for your confidence in Philips.You’ve selected one of the best-built, best-backed products available today.And we’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the Philips “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome–and thanks for investing in a Philips product.

Sincerely,

Robert Minkhorst President and Chief Executive Officer

P.S. Remember, to get the most from your Philips

product, you must return your Warranty Registration Card within 10 days.So please mail it to us right now!

•

Hurry!

Congratulations on your purchase, and welcome to the “family!”

Dear Philips product owner:

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM3

Page 4

3139 116 19452 (ENG)

IMPORTANT SAFETY INSTRUCTIONS – Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1. Read these instructions – All the safety and

operating instructions should be read before the appliance is operated.

2. Keep these instructions – The safety and

operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the

appliance and in the operating instructions should be adhered to.

4. Follow all instructions – All operating and use

instructions should be followed.

5. Do not use this apparatus near water – for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

6. Clean only with a damp cloth. The appliance

should be cleaned only as recommended by the manufacturer.

7. Install in accordance with the manufacturers instructions. Do not block any of the ventilation openings. For

example, the appliance should not be situated on a bed, sofa, rug, or similar surface or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

EL 4562-E004: 99/3

AC Polarized

Plug

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Canada

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM4

Page 5

3139 116 19452 (ENG)

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product. For one year thereafter, all parts will be repaired or replaced, and labor is free.After one year from the day of purchase, you pay for the replacement or repair of all parts,and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period.When the warranty on the product expires, the warranty on all replaced and repaired parts also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Company.

• reception problems caused by signal conditions or cable or antenna systems outside the unit.

• a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company.In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).

MAKE SURE YOU KEEP...

Please keep your sales receipt or other document showing proof of purchase.Attach it to this owner’s manual and keep both nearby.Also keep the original box and packing material in case you need to return your product.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting service. Adjustments of the controls discussed there may save you a service call.

TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS...

Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair.When the product has been repaired, you must pick up the unit at the center.Centers may keep defective parts. (In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty.But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)

TO GET WARRANTY SERVICE IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking)

(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct,indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)

REMEMBER...

Please record the model and serial numbers found on the product below.Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

AUDIO SYSTEM

One Year Free Labor

One Year Free Service on Parts

This product must be carried in for repair.

This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.

Philips Service Solutions Group, P.O. Box 2976,

Longview,Texas 75606, USA,(903) 242-4800

EL4965E006 / MAC 4110 / 12-98

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM5

Page 6

3139 116 19452 (ENG)

General Information

• The typeplate (which contains the serial number) is located at the rear of the system.

• Recording is permissible if copyright or other rights of third parties are not infringed.

• This device complies with the Federal Communications Commission (FCC) rules, part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: – This device may not cause

harmful interference, and

– This device must accept any

interference received, including interference that may cause undesired operation.

Environmental Information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Acknowledgement

Dolby Pro-Logic and the double-D symbol d are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

Accessories (Supplied)

– Remote control – Batteries (two AA size) for remote

control – AM loop antenna – FM wire antenna – AC power cord – CS-340 speaker package (includes

one pair of surround speakers and

one center speaker) – SW 040 Active Subwoofer

GENERAL INFORMATION SAFETY INFORMATION

CLASS 1

LASER PRODUCT

Safety Information

• Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer. The typeplate is located at the rear of your system.

• When the system is switched on, do not move it around.

• Place the system on a solid base (e.g. a cabinet).

• Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. Allow at least 10cm (4 inches) clearance from the rear and the top of the unit and 5cm (2 inches) from the each side.

• The system incorporates a built-in safety feature that prevents overheating.

• Do not expose the system to excessive moisture, rain, sand or heat sources.

• Under no circumstances should you repair the system yourself, as this will invalidate the warranty!

• If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the CD unit inside the system. Should this occur, the CD player will not operate normally. Leave the power on for about one hour with no disc in the system until normal playback is possible.

• Electrostatic discharge may cause unexpected problems. See whether these problems disappear if you unplug the AC power cord and plug it in again after a few seconds.

• To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM6

Page 7

3139 116 19452 (ENG)

PREPARATION

Rear Connections

AM ANTENNA

AUX/CDR IN

SUB-

WOOFER

OUT

DIGITAL

OUT

LINE OUT

AUDIO OUT

LRLR

HIGH POWER SUBWOOFER

STANDBY ON

CUT OFF FREQUENCY

60Hz 150Hz

MIN MAX

AUDIO IN

MAINS

REAR SURROUND

surr.

–

FRONT

–

FM ANTENNA 300Ω

CENTER

–

A AM Loop Antenna

Connection

Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna to the FM ANTENNA 300 Ω terminal. Adjust the position of the FM antenna for the best reception.

Outdoor Antenna

For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA 300 Ω terminal using a 300 Ω dipole wire.

C Speakers Connection

• Connect the right speaker to Front terminal R, with the colored wire to + and the black wire to -.

• Connect the left speaker to Front terminal L, with the colored wire to + and the black wire to -.

• Clip the stripped por tion of the speaker wire as shown.

unlock lock

12 mm

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM7

Page 8

3139 116 19452 (ENG)

D Rear Surround

Speakers’ Connection

Connect the black (non-marked) wires to the black REAR SURROUND terminals and the colored (marked) wires to the grey REAR SURROUND terminals.

E Center Speaker

Connection

Connect the black (non-marked) wires to the black CENTER terminal and the blue (marked wires) to the blue CENTER terminal.

F Line Out Connection

(wireless ready)

You can connect the audio left and right LINE OUT terminals to a optional CD Recorder ANALOGUE IN terminals. This allows you to record in an analogue format.

You can also install additional optional front active speakers away from the system (e.g. in another room) to reduce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided they operate at the same radio frequency. Connect the wireless

PREPARATION

I Digital Out Connection

You can record the digital sound from the CD, through this output, on any audio equipment with digital input (e.g. CD Recorder, Digital Audio Tape (DAT) deck, Digital to Analog Converter and Digital Signal Processor).

Connect one end of the cinch cable (not supplied) to the DIGITAL OUT socket and the other end to the audio equipment with digital input.When connecting the cinch cable, make sure it is fully inserted.

J AC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be sure to follow the instructions supplied with the active speakers.

Note: – Availability of wireless transmitter and

its peripherals are subjected to the approval of local authorities. Please check with respective local safety or approving authority.

G Connecting other

equipment to your system

You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals at the rear of the system.

H Subwoofer Out

Connection

Connect the supplied active subwoofer SW040 to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.

Inserting batteries into the Remote Control

• Inser t the batteries (Type R06 or AA) into the remote control as shown in the battery compartment.

• To avoid damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM8

Page 9

3139 116 19452 (ENG)

Setting up the Subwoofer

CENTER

SPEAKER

SURROUND

RIGHT

SURROUND

LEFT

FRONT

LEFT

FRONT RIGHT

MINI HIFI SYSTEM

SUB-

WOOFER

• Install the subwoofer wherever you like because with the bass sound range reproduced from the subwoofer (below 150Hz), human hearing cannot detect the direction and position in which the sound is being produced.

• Also, since the feeling of stereo is lost with bass frequencies, a single subwoofer is enough for reproducing the bass of stereo channels. However, you may install more than one subwoofer if your system has more than one subwoofer out jack.

• To obtain a better bass reproduction, we recommend that you install the subwoofer on a solid floor where resonance is unlikely to occur.

• Always place the subwoofer vertically, keeping a few centimeters from away the wall.

• Do not place an object on the subwoofer or sit on it.

• If the subwoofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happened, move the subwoofer away from the center of a room or eliminate the cause of the standing wave, by installing a bookshelf on the wall, etc.

Important: Before you operate the subwoofer, complete the preparation procedures.

Switch on your mini system and select the sound source.

AC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

Switching the subwoofer ON

• Rotate SUBWOOFER VOLUME clockwise until there is a click. ™ The LED indicator lights up in

green.

Switching the subwoofer to standby mode

• Rotate SUBWOOFER VOLUME

counter-clockwise until there is a click. ™ The LED indicator light turns red.

Volume Adjustment

You can adjust the subwoofer to suit the sound level of your front speakers. Reinforcing the bass sound gives you a greater sense of atmosphere.

1 Adjust the VOLUME on the mini

system until the sound from front speakers is not distorted. If it is distorted, the sound from the subwoofer will also be distorted.

2 Play your favourite songs. Male vocal

tunes containing bass sounds are most suitable for adjustment.

3 Adjust the SUBWOOFER

VOLUME to determine the

loudness of the bass sound from the subwoofer.

STANDBY

VOLUME

SW 030

ACTIVE SUBWOOFER

SUBWOOFER

Phase Selector

PHASE

SELECTOR

180

Use PHASE SELECTOR located at the rear of the subwoofer to select the phase polarity. Selecting the polarity at either 0˚ or 180˚ may determine better bass reproduction effect in certain listening environments (depending on the type of front speakers and the position of the subwoofer). It may also change the expense and tightness of sound, and affect the feeling of sound field. Select the setting that provides the sound you prefer when listening in your normal listening position.

Repeat the adjustment for Volume and Phase Polarity to suit your preference. Once you have adjusted the subwoofer to the settings you desire, use the VOLUME control on the mini system to adjust the volume of the subwoofer and the other speakers. You do not need to adjust the subwoofer settings again even when you change the volume level of the mini system.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM9

Page 10

3139 116 19452 (ENG)

DOLBY PRO LOGIC

Dolby Pro Logic

This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambience. The Pro Logic system allows more accurate definition of the individual sound sources. It produces greater sound separation between channels and provides pinpoint sound localization. Pro Logic provides four sound outputs: Left, Center, Right and Surround (Rear). Front sounds are produced from the pair of Left and Right speakers and a Center speaker. The surround sound is reproduced by two speakers placed at the rear of the listening area. Although the surround sound is monaural (single-source), a pair of speakers is necessary to produce the correct diffused sound.

This Pro Logic decoder enables you to decode the following modes: Dolby

Surround, Center Phantom, Dolby 3 Stereo or normal Stereo.

Setting up the Dolby Pro Logic system

You must set up the system properly in order to enjoy the Home Cinema sound to the fullest. First, connect the speakers.

5-Speaker Connection

• Front speakers: Connect the front speakers.

• Center speaker: Connect the center speaker.

• Rear (surround) speakers: Connect either the wired rear surround speakers or a pair of wireless rear speakers (not supplied) to the SURROUND OUT terminals.

SURROUND FRONT

CENTER

REAR

RIGHT

FRONT LEFT

FRONT RIGHT

REAR

LEFT

REAR

Positioning the Speakers

To get the best surround sound effect, place the speakers as follows.

CENTER

SPEAKER

SURROUND

RIGHT

SURROUND

LEFT

FRONT

LEFT

FRONT

RIGHT

MINI HIFI SYSTEM

SUB-

WOOFER

Front Left and Right Speakers

For the best sound, place the Left and Right speakers at an angle of approximately 45 degrees to the listener. If the speakers' magnetic field affects the television picture, increase the distance between the TV and the speakers.

Center Speaker

For the best sound, place the center speaker at the same height as the left and right speakers. Place the center speaker directly above or beneath the television.

Rear (surround) Speakers

The surround speakers should be placed at normal listening ear level or mounted on the wall at the back of the room. Most important, experiment when placing the surround speakers in order to obtain the best sound.

Test Tone

This feature enables you to adjust the Front Left, Front Right, Center and Surround Sound levels of the respective speakers in Dolby Pro Logic mode.

You must sit at the ideal sitting position and use the remote control to perform this operation.

1 Press CD, TUNER, TAPE or AUX

to switch on the system.

2 Press TEST TONE.

™ A test signal is generated; it will

move through the Left, Center, Right, and Surround speakers, in that order.

™ "TEST TONE" followed by

"ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed.

™ The test signal will last for about

90 seconds.

3 Press BALANCE L to adjust the

sound of the front left speaker.

™ The display will show "BAL

L+XX".

4 Press

BALANCE R to adjust

the sound of the front right speaker.

™ The display will show "BAL R

+XX".

5 Press CENTER + or - to adjust

the sound of the center speaker. ™ The display will show either

"CENT +XX or -XX".

6 Press REAR + or - to adjust the

sound of the surround speakers. ™ The display will show either

"REAR +XX or -XX".

BALANCE

CENTER REAR

DPL



pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM10

Page 11

3139 116 19452 (ENG)

DOLBY PRO LOGIC

7 Adjust the sound

of all the speakers until they are equal. When you are satisfied with the setting, press TEST TONE again to switch off the test signal.

Note: – It is advisable to set the speakers’ level

at normal listening level. "XX" denotes the sound level.

When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound.

• Press DPL (PRO

LOGIC)

repeatedly to select and cycle through the various sound modes.

Dolby Surround ™ Center Phantom ™ Dolby 3 Stereo ™ Stereo ™ Dolby Surround …

™ The Dolby Pro Logic display panel

will light up with the selection.

Dolby Surround

This setting is for a full Dolby Surround Pro Logic mode.

• Press DPL to select the Dolby Surround mode. ™ The message

“DOLBY SURROUND” will be displayed.

™ The DPL

display panel will light up.

Dolby Center Phantom

This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front.

• Press DPL to select the Dolby Pro Logic Center Phantom mode. ™ The message

“CENTER PHANTOM” will be displayed.

™ The DPL

display panel will light up.

Dolby 3 Stereo

Use this setting when full surround is not required, but a wide stereo sound is desired. It only requires the left, right and center speakers.

• Press DPL to select the Dolby 3

Stereo mode. ™ The message

“DOLBY 3 STEREO” will be displayed.

™ The DPL

display panel will light up.

Normal Stereo

This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers.

• Press DPL to select the Stereo

mode. ™ The message

“STEREO” will be displayed.

™ The DPL

display panel will light up.

PRO LOGIC

USE

TEST TONE



UME

BALANCE

á



Ç

DPL

Important!

1 For the best Dolby Pro Logic

sound, switch on DPL with DSC set to “Classic”.

2 Dolby Pro Logic mode will

automatically switch to normal Stereo mode when headphones are connected.

3 Switch to normal stereo mode

when you record on a tape.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM11

Page 12

3139 116 19452 (ENG)

CONTROLS

STEREO

BACK

HSD

REPEAT

REC LW

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DISC CHANGE

DISC 1 DISC 2 DISC 3

OPEN•CLOSE

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT

CHANGER

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

SHUFFLE

PROGRAM

SIDE

PRO LOGIC

TAPE 1/2 AUXTUNERCD

SLEEP TIMERDSC DBB

PROGRAMREPEAT SHUFFLE

BALANCE

CENTER REAR

REAR

MUTE

PAUSE

TEST TONE

Å

CD DIRECT

VOLUME

á

à

ë

í

É

Ç

≥

3 ¡

§

º

•

ª

(

)

(

⁄

¤

(

›

)

≤

∞

9 8

(

)

¡

™

£

‹

DPL



TV VOL

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM12

Page 13

3139 116 19452 (ENG)

Controls on the system and remote control

1 STANDBY ON

– to switch the system on or to

standby mode.

– to use for EASY SET.

2 LOW POWER STANDBY

LED

– lights up during low power standby.

3 DIGITAL SOUND

CONTROL (DSC)

– to select the desired sound effect :

OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL.

4 n

– to connect headphones.

5 REC (RECORD)

– to start recording on tape deck 2.

6 DUB (HIGH SPEED

DUBBING [HSD])

– to dub a tape in normal or fast

speed.

7 JOG

– to select the desired equalizer

display.

– to select the desired DSC setting.

You must select the DSC feature first.

8 PROG (PROGRAM)

for CD ............to program CD

tracks.

for TUNER ... to program preset

radio stations.

for CLOCK ..to select 12 or 24

hour in clock setting mode (on the system only).

9 CLOCK/TIMER

– to view the clock, set the clock or

set the timer.

0 DISPLAY SCREEN

– to view the current setting of the

system.

! CD CAROUSEL TRAY @ DISC 1 / DISC 2 / DISC 3 (CD

DIRECT PLAY)

– to select a CD tray for playback.

# DISC CHANGE

– to change CD(s).

$ OPEN•CLOSE

– to open or close the CD carousel

tray.

% SOURCE – to select the

following:

CD / (CD 1•2•3)

– to select CD mode. When CD

playback is stopped, press to select disc tray 1, 2 or 3.

TUNER / (FM•AM)

– to select Tuner mode. When in

tuner mode, press to select the waveband: FM or AM.

TAPE / (TAPE 1• 2)

– to select Tape mode. When tape

playback is stopped, press to select either tape deck 1 or 2.

AUX / (CDR/VIDEO)

– to select sound from an external

source (e.g. TV, VCR, Laser Disc player, DVD player or CD Recorder). When in Aux mode, press to select either AUX or CDR.

TV (only on the remote control)

– to select TV mode.

^ DPL DISPLAY PANEL

– to view the selected Dolby Pro

Logic setting.

& DOLBY PRO LOGIC (DPL)

– to select Dolby Surround, Dolby

Center Phantom, Dolby 3 Stereo or Stereo mode.

* A. REV (AUTO REVERSE)

– available in tape deck 2 only. – to select the desired play modes

( å / ∂ / ∫ ).

( MODE SELECTION

SEARCH à á (TUNING à á )

for CD ............to search backward/

forward.

for TUNER .... to tune to a lower or

higher radio frequency.

for TAPE......... to rewind or fast

forward a tape.

for CLOCK ..to set the hour (on

the system only).

for TV VOL. .. to adjust the TV

volume if the remote operates your TV.

STOP•CLEAR Ç

for CD ............to stop CD playback

or to clear a program. for TUNER ... to stop programming.

for TAPE......... to stop playback or

recording.

for DEMO ....(on the system only)

to start or stop

demonstration mode.

PLAY É / PAUSE Å

for CD ............to star t or interrupt

playback.

for TAPE......... to start playback.

í PREV / SIDE / NEXT ë (PRESET 4 3 )

for CD ............to skip to the

beginning of the

current, previous, or

next track. for TUNER ... to select a preset

radio station in

memory.

for TAPE......... to select tape side

(back or front) in

tape deck 2 only. for CLOCK ..to set the minute (on

the system only).

) VOLUME

– to increase or decrease the

volume.

¡ DYNAMIC BASS BOOST

(DBB)

– to select a bass boost level or to

switch off bass boost.

CONTROLS

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM13

Page 14

3139 116 19452 (ENG)

™ OPEN

– to open tape deck 2.

£ TAPE DECK 2 ≤ TAPE DECK 1 ∞ OPEN

– to open tape deck 1.

§ REPEAT

– to repeat a CD track, a disc, or all

available discs.

≥ MUTE

– to switch off the sound temporarily.

• BALANCE L/R

– to balance the sound level of the

Front Left and Right speakers.

ª CENTER +/-

– to adjust the sound level of the

center speaker.

º REAR +/-

– to adjust the sound level of the

surround speakers.

⁄ TEST TONE

– to check the sound level of the

Front Left, Front Right, Center and Surround speakers.

¤ SHUFFLE

– to play all the available discs and

their tracks in random order.

‹ SLEEP TIMER

– to switch the system to standby

mode at a selected time.

› B

– to switch the system to standby

mode.

CONTROLS

Notes for remote control: – First select the source you wish

to control by pressing one of the source select keys on the remote control (e.g. CD, TUNER, etc.).

– Then select the desired function

(É, í, ë, etc.).

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM14

Page 15

3139 116 19452 (ENG)

OPERATING THE SYSTEM

Notes: – When the system is switched on from

the main power outlet, the CD carousel tray may open and close again to initialize the set.

– Even though the AC power cord is

removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.

To start the demonstration mode

• Press and hold Ç(on the system only) for five seconds when the

system is in standby mode. ™ The demonstration will begin.

Easy Set

EASY SET allows you to store all available radio stations automatically.

• Press and hold STANDBY ON (on the system only) for five seconds when the system is in standby or demonstration mode. ™ “EASY SET” will be displayed,

and followed by “TUNER” and then “AUTO”.

™ EASY SET will star t searching for

all radio stations on FM band and then followed by radio stations on AM band.

™ All available radio stations with

sufficient signal strength will be stored. Up to 40 presets may be stored.

Notes: – EASY SET will start with the FM band,

if there are still presets available, the system will continue to store the AM band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET is completed.

Switching the system ON

• Press CD, TUNER, TAPE or AUX. You can also switch on the system by

pressing any one of the CD DIRECT PLAY buttons.

Switching the system to standby mode

• Press STANDBY ON or B on

the remote control. ™ The system will switch to standby

mode.

™ About five seconds later, the

system will go into an energy saving mode if the demonstration mode has been disabled.

Important: Before you operate the system, complete the preparation procedures.

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system. When the system is

switched on for the first time, the demonstration mode will start automatically.

Notes: – Dur ing the demonstration, if you press

any source (or standby-on) button, the system will switch to the respective mode (or standby).

– When the system is switched to

standby mode, the demonstration will resume five seconds later.

To stop the demonstration mode

• Press and hold Ç(on the system only) for five seconds when the

system is in demonstration mode.

™ The demonstration will stop. ™ "DEMO OFF" is displayed. ™ The system will switch to standby

mode.

™ About five seconds later, the

system will go into an energy saving mode ( < 2 watts ). The low power STANDBY ON LED will be lit.

STEREO

BACK

HSD

REPEAT

REC LW

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB (HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEAR

SEARCH • TUNING PLAY PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

SHUFFLE

PROGRAM

PRO LOGIC

SIDE

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM15

Page 16

3139 116 19452 (ENG)

Selecting the Source

• Press the respective source selection

button: CD, TUNER, TAPE or AUX. ™ The display indicates the selected

source.

Note: – For an external source, make sure you

have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals.

Selecting the Equalizer Display

You can select the desired equalizer display for the system. You must not press the DSC button on the system before using the JOG control.

• Adjust the JOG control to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE. ™ The selected display will be

shown.

NORMAL Display

FRONT

STEREO

BACK

HSD

REPEAT

REC LW

T.A.NEWS

TIMER

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

PROGRAM

OPERATING THE SYSTEM

TOP DOWN Display

FRONT

STEREO

BACK

HSD

REPEAT

REC

T.A.NEWS

TIMER

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

PROGRAM

NITE MODE Display

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

FRONT

STEREO

BACK

HSD

REPEAT

REC

T.A.NEWS

TIMER

PROGRAM

Note: – In NITE MODE, all lights will be

switched off and the display brightness will be dimmed.

Sound Control

VOLUME ADJUSTMENT

Adjust VOLUME to increase or decrease the sound level.

For Personal Listening

Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.

DIGITAL SOUND CONTROL (DSC)

The DSC feature enables you to adjust the system to suit your type of music.

• Press DIGITAL SOUND CONTROL (DSC) to select OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL. ™ The selected digital sound is

encircled.

™ “OPTIMAL X, CLASSIC,

TECHNO X, JAZZ X, ROCK X or VOCAL X” will be

displayed. "X" is the pre-selected level.

With the JOG control, you can change the level of any DSC setting except CLASSIC.

• First select the DSC feature, then adjust JOG control until the desired digital sound setting level is reached. ™ The digital sound setting level will

increase or decrease between level 1 and 5.

Note: – For neutral setting, select CLASSIC and

switch off DBB.

DYNAMIC BASS BOOST (DBB)

There are three DBB settings to enhance the bass response.

• Press DBB briefly to select a bass boost level. ™ The respective DBB level will be

encircled and lit.

™ “BEAT”, “PUNCH” or “BLAST”

will be displayed.

To switch off DBB

• Press DBB briefly until “DBB OFF”

is displayed.

Note: – Some CDs or tapes might be recorded

in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.

Automatic DSC-DBB selection

The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment.

MUTE (on remote control only)

This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence.

• Press MUTE on the remote control

to switch off the sound. ™ “MUTE” will be displayed.

• Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM16

Page 17

3139 116 19452 (ENG)

Warning!

1) This system is designed for conventional CDs. Do not use any accessories such as disc stabilizer rings or CD treatment sheets, etc., which may damage the CD mechanism.

2) Do not load more than one disc into each tray.

3) When the CD changer is loaded with CDs, do not turn over or shake the system. This may jam the changer.

You may load three discs in the CD changer for continuous playback without interruption.

STEREO

BACK

HSD

REPEAT

REC LW

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DISC CHANGE

DISC 1 DISC 2 DISC 3

OPEN•CLOSE

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEAR

SEARCH • TUNING

PLAY PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

SHUFFLE

PROGRAM

PRO LOGIC

SIDE

Discs for playback

This system can play all digital audio CD, finalized digital audio CD-Recordable and finalized digital audio CDRewritable format discs.

Loading the CD Changer

1 Press CD to select CD mode. 2 Press OPEN•CLOSE.

™ The CD carousel tray slides out.

3 Load a CD with the printed side up

in the right tray.

• You can load another disc in the left tray.

• To load the third disc, press the DISC CHANGE button. ™ The CD carousel will rotate until

the empty tray is ready for loading.

4 Press OPEN•CLOSE to close the

CD carousel tray. ™ The total number of tracks and

the playing time of the selected disc appear on the display.

Note: – To ensure good system performance,

wait until the CD changer completely reads the disc(s) before proceeding.

CD Direct Play

• You can play a CD directly by

pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. ™ A lit button indicates that a disc is

loaded in the disc tray.

Playing a CD

1 PressÉ to start playback.

™ The disc tray, track number and

elapsed playing time of the current track appear on the display.

• To interrupt playback, pressÅ. ™ The playing time flashes.

• To resume playback, pressÉ again.

2 To stop playback, press Ç.

Note: – All the available discs will play once,

then stop.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM17

Page 18

3139 116 19452 (ENG)

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing.

1 Press DISC CHANGE.

™ The CD carousel tray slides out.

2 Replace the discs in the left and right

disc trays.

• If you wish to change the inner disc

during playback, press DISC CHANGE again. ™ “DISC CHANGE" will be

displayed.

™ The CD will stop playing. ™ The CD carousel tray will close to

retrieve the inner CD and then open again with the inner CD accessible.

3 Press OPEN•CLOSE to close the

CD carousel tray.

Selecting a desired track

Selecting a desired track when playback is stopped 1 Press í or ë until the desired

track appears on the display.

2 PressÉ to start playback.

™ The selected track number and

elapsed playing time appear on the display.

Selecting a desired track during playback

• Press í or ë until the desired track appears on the display. ™ The selected track number and

elapsed playing time appear on the display.

• If you press í once it will skip to the beginning of the current track and play the track again.

Note: – Pressingí during shuffling can only skip

to the beginning of the current track.

Searching for a particular passage during playback

• Press and hold à or á until the desired passage is located. ™ The volume will be reduced.

• Play returns to normal when à or á is released.

Programming Tracks

Programming tracks of a loaded CD is possible when playback is stopped. The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show “FULL”.

1 Load the desired discs in the disc

trays.

2 Press PROG to start programming.

™ The PROGRAM star ts flashing. ™ It will cancel any previously

selected repeat mode.

3 Press the CD (CD 1•2•3) or DISC

1/2/3 button to select the disc.

4 Press í or ë to select the desired

track.

5 Press PROG to store the track.

• Repeat steps 3 to 5 to store other discs and tracks.

6 Press Ç once to end programming.

™ The total number of tracks

programmed and total playing time appear on the display.

Notes: – If the total playing time is more than

“99:59“ or if one of the programmed tracks has a number greater than 30, then “--:--” appears on the display instead of the total playing time.

– If the system is reading the disc ,

programming is not possible, “READING” will be displayed and followed by "DISC X" "X" is the current read disc number.

– Dur ing programming, if no button is

pressed within 20 seconds, the system will exit program mode automatically.

Reviewing the program

Reviewing of the program is possible only when playback is stopped.

• Press í or ë repeatedly to review the programmed tracks.

• Press Ç once to exit review mode.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM18

Page 19

3139 116 19452 (ENG)

Erasing the program (when

playback is stopped)

• Press Ç. ™ “PROGRAM CLEARED” will be

displayed.

Note: – The program will be erased when the

system is disconnected from the power supply or when the CD carousel tray is opened.

Shuffle (only on remote control)

In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed.

To shuffle all the discs and tracks 1 Press SHUFFLE.

™ “SHUFFLE” will be displayed. ™ The SHUFFLE, the disc and the

track selected at random appear on the display.

• The discs and the tracks will be played in random order until you press Ç.

• If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. ™ “TRACK” or “ALL” will be

displayed.

™ The REPEAT and SHUFFLE appear

on the display.

Playing the program

1 Press É to start program playback.

™ “PLAY PROGRAM” will be

displayed.

™ The track number and elapsed

playing time of the current track will appear on the display.

• If you press REPEAT during

program playback, the current track or all programmed tracks will be played repeatedly. ™ “TRACK” or "PROGRAM" will be

displayed.

™ The REPEAT and PROGRAM appear

on the display.

2 Press Ç to stop program playback.

Notes: – If you press any of the CD DIRECT

PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.

– REPEAT DISC mode will be cancelled

when program playback begins.

2 Press SHUFFLE again to resume

normal playback. ™ The SHUFFLE disappears from the

display.

Note: – REPEAT DISC mode will be cancelled

when shuffle is selected.

Repeat (only on remote control)

You can play the current track, a disc or all available discs repeatedly.

1 Press REPEAT on the remote

control to select the various repeat modes. ™ “TRACK”, “DISC”, “ALL” or

“OFF” will be displayed.

™ The REPEAT appears on the

display.

• The selected track, selected disc or all available discs will now be played repeatedly until you press Ç.

2 Press REPEAT until the "OFF"

mode is displayed to resume normal playback. ™ The REPEAT disappears from the

display.

Notes: – REPEAT DISC mode is not available

during program play or shuffle mode.

– You can also repeat shuffling a

program.

™ “TRACK“ or “PROGRAM" will

be displayed.

™ The REPEAT,

PROGRAM and SHUFFLE

appear on the display.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM19

Page 20

3139 116 19452 (ENG)

TUNER

• To tune to a weak radio station, briefly press à or á repeatedly until the display shows the desired frequency and/or when the best reception has been obtained.

Storing Preset Stations

You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display.

Automatic programming 1 Press TUNER (FM•AM). 2 Press PROG for more than one

second. ™ The PROGRAM star ts flashing and

“AUTO” will be displayed.

™ The system will search for every

available radio station in the FM waveband first, then search the AM waveband.

™ All available radio stations will be

stored automatically. The frequency and preset number will be displayed briefly.

™ The system will stop searching

when all the available radio stations are stored or when the memory for 40 preset radio stations is used.

™ The system will remain tuned to

the last stored preset radio station.

Notes: – You can cancel the automatic

programming by pressing PROG or

(on the system only).

– If you want to reser ve a section of

preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.

Manual programming 1 Press TUNER (FM•AM). 2 Press TUNER (FM•AM) again to

select the desired waveband : FM or AM.

3 Press PROG for less than one

second. ™ The PROGRAM star ts flashing.

BACK

HSD

REPEAT

SHUFFLE

PROGRAM

REC LW

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP •CLEARSEARCH • TUNING PLAY PAUSE PREV

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

STEREO

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

PRO LOGIC

SIDE

Note: – For 'EASY SET' feature, please refer to

page 15.

Tuning to radio stations

1 Press TUNER (FM•AM) to select

TUNER mode. ™ “TUNER” will be displayed.

A few seconds later, the current radio frequency will be displayed.

2 Press TUNER (FM•AM) again to

select the desired waveband : FM or AM.

3 Press à or á for more than one

second, then release. ™ The display will show “SEARCH”

until a radio station with sufficient signal strength is found.

• Repeat this procedure until the desired radio station is reached.

™ The next available preset number

will be displayed for selection.

4 Press à or á to tune to the

desired frequency.

• If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number.

5 Press PROG again.

™ The PROGRAM disappears and the

radio station will be stored.

• Repeat steps 3 – 5 to store other preset radio stations.

Notes: – When 40 radio stations are stored and

you attempt to store another radio station, the display will show "FULL”. If you want to change an existing preset number, repeat steps 3 – 5.

– You can cancel manual programming

by pressing Ç (on the system only).

– Dur ing programming, if no button is

pressed within 20 seconds, the system will exit program mode automatically.

Tuning to Preset Radio Stations

• Press 4 or 3 to select the desired preset number. ™ The preset number, radio

frequency, and waveband appear on the display.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM20

Page 21

3139 116 19452 (ENG)

TAPE

STEREO

BACK

HSD

REPEAT

SHUFFLE

PROGRAM

REC

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDEA•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEARSEARCH • TUNING

PLAY

PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

PRO LOGIC

SIDE

Loading a tape

1 Press OPEN. 2 The tape deck door opens. 3 Load the tape with the open side

downward and the full spool to the left.

4 Close the tape deck door.

Tape Side

(only on tape deck 2)

• Press í or ë to select the tape side for playback or recording. ™ The BACK or FRONT appear on

the display, depending on the tape side selected.

™ “T2 <<<“ or “T2 >>>” will be

displayed.

™ When recording, the BACK or

FRONT display will be flashing.

Auto Reverse Playback

(only

on tape deck 2)

• Press A. REV to select the different

playback modes.

åå

å ....... to record or playback on one

side of the tape. The tape stops at the end of one side.

∂∂

∂ ...... to record or playback on both

sides of the tape. The tape then stops.

∫∫

∫ .... to playback continuously on

both sides of the tape up to a maximum of 10 times per side unless you press Ç.

Tape Playback

1 Press TAPE ( TAPE 1•2 ) to select

TAPE mode. ™ “TAPE 1” or “TAPE 2” will be

displayed, and followed by "T1 or T2" with "<<< or >>>".

• Press TAPE ( TAPE 1•2 ) again to

select either tape deck 1 or tape deck 2.

2 Load the tape into the desired tape

deck.

3 Press É to start playback.

• If tape 1 is selected for playback; ™ “T1 ” with ">" scrolling right will

be displayed.

pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM21

Page 22

3139 116 19452 (ENG)

Selecting External Equipment

If you have connected the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player, or CD Recorder) to the AUX/CDR IN terminals, you can hear the enhanced sound from the system.

1 Press AUX to select CDR mode.

™ "CDR" will be displayed.

2 Press AUX again to select the

external (normal AUX) mode. ™ "AUX" will be displayed.

REC

SHUFFLE

TIMER

STEREO

BACK

HSD

REPEAT

PROGRAM

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

HSD

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

PRO LOGIC

SIDE

TAPE AUX/CDR

• If tape 2 is selected for playback; ™ “T2 ” with "< or >" scrolling left

or right will be displayed depending on the tape side selected.

3a(for playback on tape deck 2 only)

• Press í or ë to select tape side

(see Tape Side).

• Press A. REV to select the different type of playback mode (see Auto Reverse Playback).

4 Press Ç to end playback.

™ “T1 or T2” with “<<< or >>>”

will be displayed.

Rewind/Fast Forward

When playback is stopped 1 You can rewind or fast forward the

tape by pressing à or á respectively. ™ If rewinding, "T1 < or T2 <"

with “<” scrolling left will be displayed.

™ If fast forwarding, "T1 > or

T2 >" with “>” scrolling right will

be displayed

™ The tape will stop automatically at

the end of the rewinding or fast forwarding.

2 Press Ç to stop rewinding or fast

forwarding.

During playback

• Press and hold à or á until the desired passage is located. ™ “T1 or T2” with “<< or >>”

scrolling left or right will be displayed depending on which button is pressed.

™ During searching, the sound is

reduced to a low volume.

™ When you release à or á, the

tape continues playing.

Notes: – Dur ing rewinding or fast forwarding of

a tape, it is also possible to select another source (e.g. CD, TUNER, or AUX).

– Before playing a tape, check and

tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.

– C-120 tape is extremely thin and is

easily deformed or damaged. It is not recommended for use in this system.

– Store the tapes at room temperature

and do not put them too close to a magnetic field (for example, a transformer, TV, or speaker).

Notes: – There are two Auxiliary modes:

i. the normal AUX mode. ii. the CDR mode, where the LINE

OUT of this mini system is muted. You will not be able to record or listen to the sound from the LINE OUT.

– You are advised not to listen to and

record from the same source simultaneously.

– All the sound control features (e.g. DSC,

DBB, etc.) are available for selection.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM22

Page 23

3139 116 19452 (ENG)

TIMER

STEREO

BACK

HSD

REPEAT

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3 CDR / VIDEOFM • AM TAPE 1 • 2

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

REC

PROGRAM

PRO LOGIC

SIDE

SWITCH OFF DOLBY PRO

LOGIC WHEN RECORDING

Notes: – It is not possible to change tape side

during recording.

– For recording, use only tape of IEC type

I (normal tape) or IEC type II (Cr02).

– The tape is secured at both ends with

leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds.

– The recording level is set automatically,

regardless of the position of Volume, DBB or DSC.

– To prevent accidental recording, break

out the tab on the left shoulder of the tape side you want to protect.

– If “CHECK TAPE” is displayed, the

protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening.

Digital Recording via Digital Out

For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.

RECORDING

One Touch Recording

• For One Touch Recording, as soon as

you press REC, the current source (CD, TUNER or AUX) will be recorded on tape deck 2.

1 Load a blank tape in tape deck 2. 2 Press REC to start recording.

™ The REC star ts flashing.

3 Press Ç to stop recording.

Note: – When you press RECORD while in

TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.

CD Synchro Start Recording

1 Load a blank tape into tape deck 2

and a disc into a disc tray.

2 Press CD to select CD mode.

• You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD (CD 1•2•3) and the tracks are recorded according to the order on the selected disc.

3 Press REC to start recording.

™ The REC star ts flashing.

• CD will star t playback automatically.

4 Press Ç to stop recording.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM23

Page 24

3139 116 19452 (ENG)

RECORDING CLOCK

Dubbing tapes (from tape deck 1

to tape deck 2)

1 Press TAPE ( TAPE 1•2 ) to select

tape deck 2.

2 Load the prerecorded tape into tape

deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside.

3 Press í or ë to select the

recording tape side (see Tape Side under TAPE section).

4 Press DUB (HSD) once for

normal speed dubbing or twice (within 2 seconds) for high speed dubbing. ™ “NORMAL” (normal speed) or

“FAST” (high speed) will be displayed, followed by “DUB“ with “< or >” scrolling left or right depending on the tape side selected.

™ The HSD appears on the display

during high speed dubbing.

• Dubbing will star t immediately. ™ The REC star ts flashing.

5 Press Ç to stop dubbing.

Notes: – Only

å å

å mode is available during

dubbing.

– At the end of side A, flip the tapes to

side B and repeat the procedure.

– Dubbing of tapes is only possible from

tape deck 1 to tape deck 2.

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about seven seconds.

• Press CLOCK/TIMER briefly.

™ “PM 10:38 or 22:38 ” (the

current time) will be displayed depending on whether you have selected 12- or 24-hour mode.

™ “--

:--” will be displayed if the

clock is not set.

Note: – When the system goes into low power

standby mode, the clock setting will not be displayed.

Clock Setting

The clock can be set in either 12- or 24-hour mode, e.g. “AM 12:00“ or “00:00“. Before setting the clock, you must be in the View Clock mode.

1 Press CLOCK/TIMER to select

clock mode.

2 Press PROG (on the system only) to

select 12- and 24- hour mode.

™ If 12-hour mode is selected, “AM

12:00“ starts flashing.

™ If 24-hour mode is selected,

“00:00” starts flashing.

3 Set the hour with␣ à or á on the

system.

4 Set the minute with␣ í or ë on

the system.

5 Press CLOCK/TIMER again to

store the setting. ™ The clock star ts.

SHUFFLE

PROGRAM

STEREO

BACK

HSD

REPEAT

REC LW

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS BOOST

TAPECD

PROG

CLOCK/ TIMER

NEWS!

RDS

DOLBY B

DUB

(HSD)

REC

STANDBY ON

SIDE A•B

A.REV

TUNER AUX

PRESET

▲

STOP•CLEARSEARCH • TUNING PLAY PAUSE PREV NEXT

MINI HIFI SYSTEM

CD1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

PRO LOGIC

SIDE

– To ensure good dubbing, use tapes of

the same length.

– Dur ing high speed dubbing in Tape

mode, the sound is reduced to a low volume.

– You can listen to another source while

dubbing.

Recording from other sources (only on tape deck 2)

1 Press TAPE ( TAPE 1•2 ) to select

tape deck 2.

2 Load a blank tape into tape deck 2

with the open side downward.

3 Press í or ë to select the

recording tape side (see Tape Side under TAPE section).

4 Press CD, TUNER or AUX.

• Star t playback of the selected source. 5 Press REC to start recording.

™ The REC star ts flashing.

6 Press Ç to stop recording.

Notes: – Only

åå

å or

∂∂

∂ mode is available

during recording .

– Dur ing recording, it is not possible to

listen to another source.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM24

Page 25

3139 116 19452 (ENG)

TIMER SLEEP TIMER

• To exit without storing the setting, press Ç on the system.

Notes: – Dur ing clock setting, if no button is

pressed within 90 seconds, the system will exit clock setting mode automatically.

– When a power interr uption occurs, the

clock setting is erased.

Timer Setting

• The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up.

• Before setting the timer, make sure the clock is set correctly.

• The timer will always be switched on once it is set.

• The volume of the timer will increase from the minimum level to the most recently selected volume level.

1 Press and hold CLOCK/TIMER for

more than two seconds to select timer mode. ™ “ AM 12:00” or “00:00" or

the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode.

™ The TIMER star ts flashing.

™ The selected source is lit while

other available sources are flashing.

2 Press CD, TUNER or TAPE to

select the desired source.

• Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2.

3 Press␣ à or á on the system to set

the hour for the timer to start.

4 Press␣ í or ë on the system to set

the minute for the timer to start.

5 Press CLOCK/TIMER to store the

start time.

™ The timer is now set. ™ The TIMER remains on the display.

• At the preset time, the timer will be activated. ™ The selected source will be

played.

Notes: – Dur ing timer setting, if no button is

pressed within 90 seconds, the system will exit timer setting mode automatically.

– If the source selected is TUNER, the

last tuned frequency will be switched on.

– If the source selected is CD, playback

will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead.

– If the source selected is TAPE, and if

the preset time is reached during high speed dubbing, the TUNER will be selected instead.

– The timer will not activate if a recording

is in progress.

To switch off the TIMER 1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press Ç on the system to cancel the

timer.

™ The timer is now switched off. ™ The display will show "OFF" and

the TIMER disappears.

To start the TIMER again (for the same preset time and source)

1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press CLOCK/TIMER again to

store the start time.

™ The timer is now on. ™ The TIMER appears on the display.

Sleep Timer (only on remote

control)

This feature allows you to select a length of time after which the system will switch to the standby mode automatically.

1 Press SLEEP TIMER on the

remote control repeatedly to select a period of time. ™ The selections are as follows (time

in minutes):

60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 …

™ “SLEEP XX” or “OFF” will be

displayed. "XX" is the time in minutes.

2 When you reach the desired length

of time, stop pressing the SLEEP TIMER button. ™ After this amount of time passes,

the system will switch to the standby mode.

To switch off the Sleep Timer

• Press SLEEP TIMER repeatedly

until "OFF" is displayed, or press the STANDBY ON button.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM25

Page 26

3139 116 19452 (ENG)

Specifications

AMPLIFIER

Output power ....................................2 x 70, 40, 2 x 20 W FTC

DPL Mode

Left/Right Channel ............................2 x 70 W FTC

(1)

Center Channel ................................ 40 W FTC, 12 Ω

Surround Channel ......................2 x 20 W FTC, 6 Ω

Stereo Mode ............................................. 2 x 70 W FTC

(1)

Signal-to-noise ratio ..................................... ≥ 75 dBA (IEC)

Frequency response ....................40 – 20000 Hz, ± 3 dB

Input sensitivity

AUX/CDR In ................................................................ 500 mV

Output

Speakers ...............................................................................≥ 6 Ω

Center Speaker .............................................................≥ 12 Ω

Surround Speakers .........................................................≥ 6 Ω

Headphones................................................. 32 Ω – 1000 Ω

Subwoofer Out .........................1.5 V ±2dB, > 22000 Ω

Line Out .................................500 mV ±2dB, > 22000 Ω

Digital Out ............................................... IEC 958, 44.1 kHz

(1) (6 Ω, 60 Hz – 12.5 kHz, 10% THD)

CD PLAYER

Number of programmable tracks .................................... 40

Frequency response ..................................... 40 – 20000 Hz

Signal-to-noise ratio .................................................. ≥ 76 dBA

Channel separation .....................................≥ 79 dB (1 kHz)

Total harmonic distortion ....................... < 0.02% (1 kHz)

TUNER

FM wave range ..............................................87.5 – 108 MHz

AM wave range .............................................530 – 1700 kHz

Number of presets ................................................................... 40

Antenna FM ............................................ 300 Ω dipole wire

AM ......................................................Loop antenna

TAPE DECK

Frequency response

CrO2 tape (type II) ................... 60 – 15000 Hz (5 dB)

Normal tape (type I) ................. 60 – 15000 Hz (5 dB)

Signal-to-noise ratio

CrO2 tape (type II) .............................................. ≥ 50 dBA

Normal tape (type I) ............................................ ≥ 47 dBA

Wow and flutter.................................................... ≤ 0.4% DIN

SPEAKERS

System ............ 3-way shielded; double port bass reflex

Impedance................................................................................... 6 Ω

Woofer ................................................................................. 1 x 6.5"

Tweeter .................................................................................1 x 2.5"

Polydome Tweeter ..............................................................2 x 1"

Dimensions (w x h x d) ... 9.45 x 12.20 x 12.40 (inch)

................................................................. 240 x 310 x 315 (mm)

Weight............................................................. 8.98 pounds each

........................................................................................... 4.1 kg each

CS-340 CENTER SPEAKER

System ......................................................... shielded bass reflex

Impedance................................................................................ 12 Ω

Speaker Driver ............................................... 1 x 3” full range

Dimensions (w x h x d) ......10.24 x 5.51 x 9.45 (inch)

................................................................. 260 x 140 x 240 (mm)

Weight......................................................................... 3.30 pounds

....................................................................................................... 1.5 kg

CS-340 SURROUND SPEAKERS

System ....................................................................closed satellite

Impedance................................................................................... 6 Ω

Speaker Driver ............................................... 1 x 3” full range

Dimensions (w x h x d) .........9.21 x 4.06 x 8.82 (inch)

................................................................. 234 x 103 x 224 (mm)

Weight............................................................. 1.67 pounds each

........................................................................................ 0.76 kg each

SPECIFICATIONS

SW040 SUBWOOFER

System ............................................................ Active Subwoofer

(non magnetically shielded design)

Subwoofer.................................................................................... 6.5"

Output Power...................................... 50 W (4 ohms, DIN)

THD ........................................................................ 10 % at 55 Hz

Reproduction frequency response .... 45 Hz – 150 Hz

Phase switch ..................................................................... 0˚ , 180˚

Input sensitivity (Subwoofer In) .....................460 mVrms

AC Power .............................................................. 120 V / 60 Hz

Power consumption ..........70 W (at 1/8 Rated Power)

Dimensions (w x h x d) .... 7.87 x 12.20 x 14.57 (inch)

................................................................. 200 x 310 x 370 (mm)

Weight...................................................................... 15.40 pounds

............................................................................................... 7 kg each

GENERAL INFORMATION

Material/finish .............................................. Polystyrene/Metal

AC Power .............................................................. 120 V / 60 Hz

Power Consumption

Active ................................................................................. 145 W

Standby ............................................................................ < 20 W

Standby (energy saving mode) ..............................< 2 W

Dimensions (w x h x d) ... 10.43 x 12.20 x 15.35 (inch)

................................................................. 265 x 310 x 390 (mm)

Weight (without speakers)........................... 19.36 pounds

....................................................................................................... 8.8 kg

Subject to modification

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM26

Page 27

3139 116 19452 (ENG)

MAINTENANCE TROUBLESHOOTING

Maintenance

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Cleaning the CD lens

• After prolonged use, dirt or dust may accumulate at the CD lens. To ensure good playback quality, clean the CD lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Cleaning the Heads and the Tape Paths

• To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation.

• Use a cotton swab slightly moistened with cleaning fluid or alcohol.

• You can also clean the heads by playing a cleaning tape once.

Demagnetizing the heads

• Use a demagnetizing tape available at your dealer.

Warning! Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock.

• If a fault occurs, check the points listed below before taking the system for repair.

• Should any problems persist after you have made these checks, consult your nearest dealer or service center.

CD Player Operation

“NO DISC” is displayed.

• The disc is inserted upside down.

™ Place CD with printed side up.

• Moisture condensation at the lens.

™ Wait until lens has adjusted to normal

room temperature.

• There is no disc in the CD tray.

™ Insert a CD.

• The CD is dirty, badly scratched or

warped.

™ Clean or replace the CD.

• The CD lens is dirty or dusty.

™ See section under Maintenance (page

27).

“DISC NOT FINALIZED” is displayed.

• The CD-RW or CD-R disc is not properly recorded for use with a standard CD player.

™ Read the instruction booklet of your

CD-Rewritable or CD-Recorder on how to finalize a recording.

• The CD is badly scratched or dirty.

™ Replace or clean CD.

Radio Reception

Poor radio reception.

• The signal is too weak.

™ Adjust the antenna. ™ Connect an external antenna for

better reception.

• The TV or VCR is too close to the stereo system.

™ Separate the stereo system from the

TV or VCR.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM27

Page 28

3139 116 19452 (ENG)

TROUBLESHOOTING

Tape Deck Operation

Recording or playback cannot be made or there is a decrease in audio level.

• Dirty tape heads, capstans or pressure rollers.

™ See section on tape deck maintenance

(page 27).

• Magnetic build-up in the record/ playback head.

™ Use demagnetizing tape.

Tape deck door cannot open.

• Power failure or AC power plug disconnect from the wall outlet during tape playback.

™ Reconnect the AC power plug and

switch on the system again.

Recorded material sounds strange.

• Tape was recorded in one of the Dolby Pro Logic modes.

™ Switch off Dolby Pro Logic mode when

recording.

General

System does not react when any button is pressed.

• Electrostatic discharge.

™ Press STANDBY ON to switch the

system off. Remove the AC power plug from the wall outlet, then reconnect the power plug and switch on the system again.

No or poor sound.

• Volume is not turned up.

™ Adjust VOLUME.

• The headphones are connected.

™ Disconnect the headphones.

• Speakers are not connected or are connected wrongly.

™ Check that the speakers are

connected correctly.

™ Make sure the stripped speaker wire is

clamped.

Reversed left and right sound.

• Speakers are connected wrongly.

™ Check the speaker connections and

location.

Lack of bass sound or apparently imprecise physical location of musical instruments.

• Speakers are connected wrongly.

™ Check the speaker connection for

proper phasing, colored/black wires to colored/black terminals.

Remote control has no effect on the system.

• Wrong source is selected.

™ Select the source (CD, TUNER, etc.)

before pressing the function button (É, í, ë, etc.).

• The distance to the system is too large.

™ Reduce the distance.

• Batteries are inser ted incorrectly.

™ Insert the batteries with their polarities

(+/– signs) as indicated.

• Batteries are exhausted.

™ Replace the batteries.

Timer is not working.

• Clock is not set.

™ Set the clock.

• Timer is not switched on.

™ Press CLOCK/TIMER to switch on the

timer.

• Recording is in progress.

™ Stop recording.

Clock setting is erased.

• There was a power failure.

™ Reset the clock.

System displays features automatically; buttons flash continuously.

• Demonstration mode is switched on.

™ Press and hold Ç (on the system) for

five seconds to switch off the demonstration.

There is a howling sound at the external source.

• You hear feedback when you are listening from the same source simultaneously.

™ Press AUX to select CDR mode.

All lighted buttons are not lit.

• Equalizer Display is switched on in NITE mode.

™ Adjust JOG to select other Equalizer

Display.

Subwoofer

There’s no sound.

• Check that this subwoofer and components are connected correctly and securely.

™ Adjust the volume.

The sound is distorted.

• The input signal is imperfect, distorted or the input signal level is too high.

™ Adjust the subwoofer volume level.

In case color irregularity is observed on the nearby TV screen.

• The subwoofer and the TV is too close.

™ Place the subwoofer further from the

TV set.

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM28

Page 29

3139 116 19452 (ENG)

President Message ............................ 2 - 3

Important Safety Instructions .............. 4

Limited Warranty ................................... 5

General Information.............................. 6

Safety Information ................................ 6

Preparation ....................................... 7 - 8

Subwoofer .............................................. 9

Dolby Pro Logic ............................ 10 - 11

Controls ......................................... 12 - 14

Operating The System .................. 15 - 16

CD.................................................. 17 - 19

Tuner .................................................... 20

Tape ...............................................21 - 22

AUX/CDR ............................................. 22

Recording ...................................... 23 - 24

Clock .................................................... 24

Timer .................................................... 25

Sleep Timer ......................................... 25

Specifications ....................................... 26

Maintenance ........................................ 27

Troubleshooting ............................ 27 - 28

TABLE OF CONTENTS

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM29

Page 30

3139 116 19452 (ENG)

PAGE GUIDE

789

11 12 13

15 16 17

☞

19 20

FRONT COVER

22 23

TABLE

CONTENTS

25 26

PAG E

GUIDE

BACK PAG E

BLANK

PAG E

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM30

Page 31

3139 116 19452 (ENG)

FW 890P

FW-P78

Philips Consumer Electronics Company

A Division of Philips Electronics North America Corporation, Knoxville, Tennessee 37914-1810, USA

Printed In China

3139 116 19452 (ENG) IB8166T001 JP-9944/37-3

English

pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM31

Philips FWP78P37, FWP78P User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual