Philips FISIO311 User Manual
Discover your phone
Antenna
Screen
+FGNUETGGPFKURNC[UVJGVKOG
FCVGCPFPGVYQTMPCOG
Pick up key
(
6QCPUYGTCECNNQTVQFKCNC
PWODGTFKURNC[GFQPVJGUETGGP
+P9#2OQFGEQTTGURQPFUVQC
UQHVMG[
WAP @ key
+PKFNGOQFGRTGUUVQCEEGUU
9#2DTQYUGT+P9#2OQFG
EQTTGURQPFUVQCUQHVMG[
, key
+PKFNGOQFGRTGUUCPFJQNFHQT
XQKEGFKCNQTXQKEGEQOOCPF
Alphanumeric keypad
2TGUUMG[UVQGPVGTPWODGTUCPF
VGZV2TGUUCPFJQNFCMG[VQ
CEVKXCVGCRTQITCOOGFJQVMG[
Microphone
Language
+PKFNGOQFGNQPIRTGUU0VQ
EJQQUGCNCPIWCIGKPYJKEJVJG
VGNGRJQPGHWPEVKQPUYKNNDG
FKURNC[GF
Earpiece
Navigation key
7UG+CPF-VQPCXKICVGKP
VJGOGPWUCPF,VQXCNKFCVG
KPHQTOCVKQP
e key
+FNGOQFG
.QPIRTGUUVQNQEM
WPNQEMVJGMG[RCF
0CXKICVKQPOQFG
2TGUUVQ
TGVWTPVQRTGXKQWUOGPW
'FKVOQFG
2TGUUVQFGNGVGC
EJCTCEVGTRTGUUCPFJQNFVQ
FGNGVGCNNEJCTCEVGTU
9#2OQFG
2TGUUVQIQDCEM
QPGRCIGRTGUUCPFJQNFVQGZKV
DTQYUGT
Hang up
)
and "On/Off" key
2TGUUVQGPFCECNNCPFVQUYKVEJ
[QWTRJQPGQPRTGUUCPFJQNF
VQUYKVEJ[QWTRJQPGQHH
+P9#2OQFGEQTTGURQPFUVQC
UQHVMG[
C
key
2TGUUVQGPVGTVJGECTQWUGNOGPW
QTTGVWTPVQKFNGUETGGP
9#2OQFG
2TGUUVQQRGPVJG
DTQYUGTOGPW
Philips continuously strives to improve its products, and the information and specifications described in this user
guide are subject to change without notice. Philips tries to ensure that all information in this user guide is correct,
but does not accept liability for any error, omission or discrepancy between this user guide and the product
described.
Memory card
Switch on/off
Enter PIN
Make a call
Answer a call
End a call
See the last call made
Quickly access the
Quickly access the
Return to previous menu
Return to idle screen
Lock/unlock the keypad
Change the language used
Access the carousel
Use Names List
Names
Call
list
Press ) to switch On, press and hold ) to switch Off.
Enter your PIN code using the keypad and press , or
#
to confirm.
Enter phone number on keypad and press ( to dial, or
press
C
call.
Press ( when your phone rings.
Press ) .
Press ( in idle mode.
list
In idle mode, move -.
In idle mode, move +.
Press e.
Press and hold e or press C.
In idle mode, press and hold e.
Press and hold 0, select the language and press ,.
1. Press , or C to access the Carousel menu.
2. Move
enter the sub-menu.
3. Repeat step 2 until you reach the wanted function.
1. In idle mode, press , or C.
2. Select the Names option and press
3. Browse the list by moving
the selected name.
to select the Call option, then press ( to
+
or - to select a function, then press , to
,
.
+
or - and press ( to call
1
T ab le of contents
1. Getting started.........4
First steps ................................4
First call....................................6
The battery..............................6
The carousel...........................8
2. Main features ............9
Idle screen...............................9
Making a call..........................10
Answering and
ending a call...........................10
Redial and reply....................11
Flash dial.................................11
Voice dial ...............................11
During a call, you can….....12
Clear the call list..................13
Clear the SMS list ................13
Locking / unlocking
the keypad.............................14
Deactivate the ringer..........14
Activate the vibrator...........15
Reading your own
GSM phone number............15
How to enter text
or a number..........................15
3. Menus tree..............19
4. Settings.....................21
Introduction..........................21
Sounds....................................21
Display....................................24
Security ..................................24
Time and date.......................26
Hotkeys..................................27
Voice command...................29
Network................................29
Call settings...........................30
Quick settings.......................31
5. Names, calls
and messages ..........34
Introduction..........................34
Names....................................35
Calls and messages..............37
Call list....................................43
6. Organiser
and Extras................44
Introduction..........................44
Organiser...............................44
Extras......................................46
7. WAP services .........49
Introduction..........................49
WAP.......................................49
2
8. Other operator
services ....................53
Introduction..........................53
GSM strings...........................53
Query a voice server, voice
mailbox, messaging service,
etc. (DTMF tones)...............54
Making a second call............54
Answering a second call.....55
Answering a third call ........56
Conference Call ..................56
Explicit Call Transfer .........56
In-call symbols......................56
9. Games ......................57
Introduction..........................57
Wall Breaker.........................57
Other games.........................59
SMS interactions ..................60
Precautions..................61
Troubleshooting.........65
Glossary........................67
Philips authentic
accessories...................69
3
1 • Getting started
Read the safety instructions in the "Precautions" section before use.
First steps
To use your phone, you must insert a valid SIM card supplied by your GSM operator
or reseller. The SIM card contains your subscription, your own phone number, and
a memory in which you can store phone numbers and messages (see “Names, calls
and messages” page 34). If you use your SIM card on another phone, your phone
number and your Names list remain the same.
Inserting the S IM card
1 Remove the battery cover:
2 Slide the micro-SIM card into its slot until it stops. Be careful that the clipped
corner is in the identical position as on the drawing..
4
3 Insert the battery: plug the connector into the socket (if you cannot plug it, try
again reversing the plug) then slide the battery in its housing.
4 Attach the battery cover:
A new battery is not completely charged (see “Charging the battery” page 6).
En te r in g th e P IN c o d e
1 To switch on the phone, press and hold the ) key.
2 When you switch on the phone, you are prompted to enter the PIN code,
which is the 4 to 8-digit secret code of your SIM card to protect it from abusive
use. It is preconfigured and communicated to you by your operator or reseller.
To personalise the PIN code, see “Change codes” page 26.
If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it, you
must request the PUK code from your operator.
3 Enter your PIN code. If you make a mistake, press e. Then confirm by
pressing
,
or #.
4 Wait for the 2 beeps indicating that the connection with the network is
established. The screen looks as shown below.
To set the time and date, see page 26.
Getting
started
5
PIN2 code and PUK2 code
Depending on your SIM card, some features or options may require a PIN2 secret
code. This is a second secret 4 to 8-digit code given to you by your service provider.
If you enter a wrong PIN2 code 3 times, your SIM card is blocked. To unblock it, you
must request the PUK2 code from your operator or reseller.
If you enter an incorrect PUK code ten times in a row the card will be completely
blocked and unusable. If this happens contact your operator or reseller.
First call
1 Enter the phone number (if you make a mistake, press e) and press (.
2 Once connected, your phone emits 2 beeps. To end the call, press
The battery
Your phone is powered by a rechargeable battery. A new battery is not fully charged
and an alarm will warn you when the battery needs recharging. We advise you to
keep the battery attached to the phone, even when discharged: the backup battery
for the clock (inside the phone) will last longer.
We do not recommend to remove the battery when the phone is switched on: you may
lose all your personal settings (see information on battery safety, page 63).
Charging the battery
1 Once the battery and battery cover are clipped on the phone, plug the charger
(supplied with the phone, in the box) into the right hand socket at the base of
the phone as shown below
.
)
.
Getting
6
started
2 Plug the transformer unit into a main AC power socket with easy access. The
b
symbol indicates the state of charge:
• During charging the 4 charge indicators change; Each bar represents 25%
of charge.
•
When all 4 bars are steady the battery is fully charged and you
can disconnect the charger
• When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Keeping the charger plugged to the mobile when the battery is fully charged doesn’t
damage the battery.
3 To optimise battery capacity, you should allow the battery to fully discharge
every now and then. In this case, consider that a period of about 1hr40mn
charging is required to fully recharge a completely discharged battery.
4 If you don’t use your phone for several days, we recommend you to disconnect
the battery.
Notes:
• You can use the phone while charging.
• The only way to turn the battery charger off is to unplug it from the mains outlet;
for this reason use a mains outlet with easy access.
• You can connect the charger to an IT supply (Belgium only).
• If the battery is completely flat, the battery icon will only reappear after 2 or 3
minutes of charging.
Rem o ving the ba ttery
1 Remove the battery cover.
2 Unplug the connector from its slots.
3 Lift the top of the battery out of the phone and slide it out.
.
Getting
started
7
The carou sel
Oper. se rvices
Quick settings
Settings
Extras
Organiser
Main carousel
Repeat the operation described above and browse carousels and lists until you reach
the wanted feature or option. With the Compass Key, you can then select or adjust
all the functions of your phone as described in each chapter of this user guide.
A carousel is a circular loop of icons displayed on the screen, each
icon representing a feature or option used to operate your phone.
Names
Message s
All icons don’t fit within the screen; the hidden ones appear when
scrolling
+
or -.
The first carousel available when you turn on your mobile phone is
called the "main" carousel. You access it by pressing
when in idle mode, and it features the icons shown opposite. To
Call list
select a feature or option, move
clockwise) and press
,
when the cursor + is under the feature or
+
(clockwise) or - (anti
option of your choice. Another sub-carousel or a list will then appear.
Pressing the same key (called a toggle key) or using + / - will
alternate between two options, such as Activate/Deactivate.
,
or
C
Getting
8
started
2 • M ain features
Idle s cr ee n
After switching your phone on and entering the PIN code (see page 4), your
phone displays the idle screen which means that it is ready to be used. In idle
mode, up to 13 symbols can be displayed (max. 8 simultaneously in idle mode).
If the n symbol isn’t displayed, the network is not currently available. You may
be in a bad reception area (e.g. in a tunnel): if possible, move to a different
location. The phone automatically returns to idle screen over a 2 mn period of
inactivity. You can still receive a call in this case.
Symbols
A
Alarm clock
Q
Silent
when receiving a call.
Vibrator
when receiving a call.
L
Key p ad l o ck -
from being pressed accidentally.
S
SMS full
full. Delete old messages to receive
new ones.
F
Call Forward Unconditional to
number
forwarded to a number other than
voice mail.
M
Voice mail
mail.
activated.
- Your phone will not ring
- Your phone will vibrate
Protects the keys
- Memory for messages is
- Incoming voice calls are
- You received a voice
R
Roaming
- You are using a network other
than your subscribed one.
s
SMS message
message.
f
Call Forward Unconditional to voice
mailbox
forwarded to voice mail.
H
Home zone
home zone. Subscription dependent
function: see your operator.
B
Battery
level (4 bars = full, no bars = recharging
needed).
N
Network :
network
qReception quality : the more bars are
shown the better the reception is.
Voice memo
recorded but not yet played.
- You received a new
- Incoming voice calls are
- You are currently within the
- The bars indicate the battery
your phone is connected to a
- A voice memo has been
9
Events
Some events may modify the idle screen (missed call, new message, reminder
from the organiser, etc.). In this case, press
menu or
e
orC to go back to idle.
If you locked your keypad, you must unlock it before being able to access any menu.
You lock/unlock your keypad by pressing and holding the
,
to access the corresponding
e
key.
Making a call
1 In idle mode, enter the phone number using the keypad. To correct an error,
press
e
. To move through numbers move + or -.
For an international call, you can enter the "+" key instead of the usual international
prefix. To do this press and hold
2 Press ( to dial the number.
3 Press
To learn other ways of making a call, see “Calls and messages” page 37.
)
to hang up.
*
before dialling the country code.
Answering and ending a call
1 When receiving a call, the phone rings, the i animation and Incoming call are
displayed. Depending on your subscription and if your correspondent has
enabled this information to be transmitted, his number may be displayed.
Moreover, if you stored this number in your Names list, the corresponding
name is displayed instead of the number.
2 To answer the call, press
3 To reject a call, press
the call is diverted to a number or voicemail and there is a busy tone.
Notes:
• The phone will not ring if the ringer is deactivated (see page 14).
• If you have selected
by pressing any key (except
4 To hangup, press).
(
.
)
. If you have activated “Call forward” (see page 30),
Any Key Answer
(see page 31), you can accept a call
)
) or by pressing ,.
10
Main features
Redial and reply
Flash dial
The phone stores the last 30 numbers in the Call list (called, missed or received).
You can redial or reply to any of these numbers and dial it directly. The most recent
number is displayed first.
1 In idle screen, move + to access the Call list, which displays a chronological
list of the last calls received or made. If a number of the Call list is also in your
Names list, the corresponding name is displayed.
2Move + or - to select the number to redial or replay.
3Press
4Press
(
to dial the selected number.
)
to hang up.
Flash dial
Instead of entering the Names menu and scrolling through the list, you can configure
the call of a correspondent by linking the relevant name card to a hotkey, so that a
long press on this key will directly call him/her (e.g. long press on
home or on
1 To set a hotkey for flash dial, press , to enter the main menu, then select
2 Select a key from
3 Then select Flash Dial, press
4 Press and hold a key between
3
to call your office).
You c an only p r ogra m ke ys
language) and
Settings > Hotkeys and press
Press
the connection is established. Press
You can also set hotkeys for commands (see “Hotkeys” page 27). Hotkeys can be
changed or deleted at any time.
1
,
to confirm your choice.
2
to 9, as keys 0 (selection of the
(voice mailbox) are predefined and cannot be changed.
,
.
2
to 9 and press ,.
,
and select a name in the Names list displayed.
2
and 9 to dial the associated entry:
)
to hang up.
Voice dial
As for the Flash dial feature, the voice dial also allows you to quickly call a name in
Voice Dial
the list: instead of programming a hotkey, you simply configure a voice command by
recording a word that will call the corresponding name when pronounced.
2
to call your
Main features
11
1 To set a voice tag for voice dial, press , to enter the main menu, then select
Names > the name of your choice in the list and press
2 Then select Voic e d i al in the carousel menu, and press
When the option Add voice tag? appears, press
instructions displayed on the screen. When prompted to record your voice
tag, make sure you are in a quiet environment, choose a short and simple word
and clearly pronounce it.
3 Back to the Voice dial menu, press and hold
4 To dial a number associated with a voice tag: press and hold
voice tag corresponding to the number to dial.
Voice tags can be played, changed or deleted at any time. You can also set a voice tag
for a voice command (e.g. launch the calculator or add an organiser event) instead
of a voice dial.
The duration of a voice tag is 2 seconds. Up to 15 voice tags can be defined and
shared between voice dial and voice command.
e
,
,
,
to go back to idle.
During a call, you can…
Ad ju s t th e e a rp iec e v o lu me
During a call, move + to increase the volume, or - to decrease it.
Mute the microphone
You can mute the microphone so that your correspondent cannot hear you.
During a call, press
Unmute the microphone
To unmute the microphone during a call, press , and select Unmute and confirm
by pressing
W r it e in th e n otep a d
The notepad is a temporary memory in which you can note down a number during
a call. To do so, proceed as follows:
1 Press
2 Enter the number that you want to note. Wait a few seconds for your entry to
be stored automatically in the notepad memory. The phone returns to the call
options screen. When the call ends, the number re-appears; you can complete
it, dial it, or store it in the Names list.
,
, select Mute and confirm by pressing ,.
,
. The microphone is unmuted.
,,
move + or - to select Notepad, then press
twice.
.
, then follow the
,
, then say the
,.
12
Main features
If you press , just after having entered the number, you will be able to store this
number in memory, call it or send a SMS.
Consult the Names list
To consult the Names list during a call:
1Press
2In the Names menu, scroll through the entries by moving
3Press
Other features during a call
• Add a name to the Names list (see page 35),
• Write and send a message via the Names list or the Notepad (see page 39),
• Read a message (see page 41),
• Check a voice mailbox or access a voice server via the Notepad (see page 43),
• Make a second call (see page 54),
• Consult your Organiser (see page 44),
• Consult your Call list (see page 43),
• Transmit DTMF tones to answering machines and other devices (see page 54).
,
, select Names, then confirm by pressing ,.
e
twice to return to the In-call screen.
Clear the call list
To clear your call list (which contains a maximum of 30 calls), proceed as follows:
+
1Move
2 Press
to display the Call list.
,
to access the call list carousel, then move + or - to select Reset
and press
,
to confirm your choice: your call list is empty.
Clear the SMS lis t
As explained further in this guide, short messages (SMS) sent, received or read can
also be saved (see “Calls and messages” page 37). The whole list can be cleared at
once:
1 Press
2Move
,
to access the main menu, select Messages, then press ,.
+
or - to select Reset and press , to confirm your choice: your call
list is empty.
Calls list and SMS list are the only ones you can reset: this procedure doesn’t apply to
your phonebook content (names must be deleted one after the other). Deleting your
SMS list is useful to free memory space in order to store new messages.
+
or -.
Main features
13
Locking / unlocking the keypad
You can lock the keypad to protect the keys from being pressed accidentally (e.g.,
when the phone is in your pocket).
1 To lock the keypad, press and hold
appears on the screen.
2 To unlock the keypad, press and hold
Notes:
• You can also choose immediate or delayed lock by selecting
>
Keypad lock
delay). If you unlock it by pressing the
while you use your phone, and then locked again after the delay you defined in
your setting.
• The emergency number is available even when the keypad is locked and you can
still receive calls (see “Emergency number” page 38).
• Immediate keypad lock can be assigned to a Hotkey (see page 27).
• You must unlock your keypad before switching the phone off.
• It is possible to accept or reject a call even when the keypad is locked. The
keypad is unlocked automatically when the phone receives a call, and then relocks again once the call is finished.
. In this case, your keypad will be permanently locked (after that
e
when in idle screen. The icon L
e
again.
e
key, it will be temporarily unlocked
Deactivate the ringer
If you don’t want your phone to ring when you receive a call, you can deactivate the
ringer. In this case, the
Incoming call, but the phone doesn’t ring. To deactivate the ringer, proceed as
follows:
1 Press , to enter the main menu, then select Settings >Sounds >Ringer
volume
2Move - to adjust the volume to Silence.
Silent mode can also be set by select ing
vibrator is also activated. For faster access, you can assign a hotkey to this function.
i
symbol flashes when you receive a call, the display shows
.
Quick Settings > Silence
Settings >Security
. In this case, the
14
Main features
Ac tiv ate the v ibra tor
If you have set the function, your phone vibrates when receiving an incoming call
(activating the silent mode via the Silence Quicksetting as described above will also
activate the vibrator). Otherwise, proceed as follows:
1 In idle screen, press , and select Settings > Sounds > Vibrator.
+
2Move
or - to select On or Off and press , to confirm.
Activating the vibrator doesn’t mute the ringer. If you want to mute it and keep the
vibrator function on, activate the
Silence
mode as described above.
Reading your own GSM phone number
To read your own mobile phone number, proceed as follows:
1 In idle screen, press
2In the Names menu, move
phone number is displayed if present on your SIM card. If not, select New, then
follow the instructions displayed on the screen.
If your own number has been stored in the Names list, you can read it during a call.
See “Consulting the Names list” page 13.
,
orC.
+
or - to select Own num., then press ,. Your
Ho w to enter text or a num ber
Text can be entered in editing screens in two different ways: by using T9™ Text
Input, or basic text input. Two other modes for numbers and punctuation marks, are
also available. Icons in the upper and lower right corners of the screen show the
active text edition mode. You switch from a mode to the other by pressing the
key, and from lower to upper case by pressing the # key.
*
Main features
15
ENTER TEXT: En
Language used: English
T9
Editing mode used: T9
Press the * key to switch to basic mode, to numeric mode, or to punctuation mode
ENTER TEXT: Abc
ENTER TEXT: 123
ENTER TEXT: %!?
While in any text mode, press the # key to switch from lower to upper case:
ENTER TEXT: abc ENTER TEXT: Abc
ENTER TEXT: ABC
T9™ tex t Input
What is it?
T9™ Text Input is an intelligent editing mode for SMS, including a
comprehensive word database. It allows you to quickly enter text, e.g. to send
a short message. Press only once on the key corresponding to each letter
Te g ic Eu ro . P at .
App. 0842463
needed to make up a word: keystrokes input are analysed and T9™ comes up
with a proposal displayed in the bottom of the screen. If several words are
available according to the keys used, press
0
to browse the list and choose
a word among the ones proposed by the T9™ built-in dictionary (see example
below).
How to use it?
Alphabets and symbols represented by each key and the sequence for T9™ Tex t
Input are as follows:
2
to
9
To key in alphabets.
e
0
1
or
Short press to clear one entry, long press to clear all text.
Short press to browse the list of candidate words,
long press to browse back.
#
To c on f ir m en t ry.
16
Main features
ENTER TEXT: En
Good
1
Confirm
4
7
*
Typing mode
GHI
PQRS
T9
2
5
8
0
ABC
JKL
TUV
Scroll
Example
To type "Home", press 4 (GHI), 6 (MNO), 6 (MNO),
(DEF). "Good" is first word displayed, since it also corresponds to the
combination of keys you pressed (
3
(DEF).) Disregard this word and press 0 to display the next
4
(GHI), 6 (MNO), 6 (MNO),
available word of the database. When "Home" appears, press
confirm your choice. To add the character "!", press
the punctuation editing mode, then press
*
6
as shown on the diagram
appearing on the screen.
Press
*
enter new words. Press
again to switch back to T9™ mode and repeat the steps above to
,
to confirm the completion of the editing.
Basic text input
Although your phone provides you with the T9™ Text Input by default, select “Abc”
basic text input using
*
key if you wish to access the basic text input. This
method requires multi-pressing each key to reach the wanted character: the letter
"h" being the second one of key
4
, you must press 2 times 4 in order to
enter "h".
Using this mode requires you press a key as many times as needed to reach the
original position of the character on the key.
In basic mode, the complete table character corresponding to the key you press scrolls
in the bottom of the screen, allowing you to visualize each available character located
on this key (see below).
To enter the word "Home" in basic text input mode, you should therefore key in
4, 4
(GHI) 6, 6, 6 (MNO), 6 (MNO), 3,
(DEF). Press 1 to insert a space between words, * to switch to another
mode and
,
to confirm the completion of the editing.
3
DEF
6
MNO
9
WXYZ
#
Shift
3
1
to
3 times to access
3
Main features
17
Alphabets, numbers and symbols are located on each key as follows:
Key
Label
1
2
3
4
5
6
7
8
9
0
*
#
e
Upper case alphanumeric Lower case alphanumeric
space 1 @ _ # = < > ( ) & £ $ ¥ space 1 @ _ # = < > ( ) & £ $ ¥
A B C 2 A Ä Å Æ C a b c 2 à ä å æ ç
D E F 3 É E ∆
G H I 4 Γ I g h i 4 Γ ì
J K L 5
M N O 6 Ñ O Ö m n o 6 ñ ò ö
P Q R S 7 β Π Θ
T U V 8 Ü U t u v 8 ü ù
W X Y Z 9 Ø Ω Ξ
. 0 , / : ; " ’ ! ¡ ? ¿ * + - % . 0 , / : ; " ’ ! ¡ ? ¿ * + - %
Toggles between the different Text Input modes (see page 16). Access to the WAP
menu in WAP mode.
Switches from lower case to upper case and vice-versa.
Short press to delete one character, long press to delete all text.
Φ
Λ
Σ
Ψ
d e f 3 é è ∆
j k l 5
p q r s 7 β Π Θ
w x y z 9 ø Ω Ξ
Φ
Λ
Σ
Ψ
18
Main features
3 • Menus tree
Easy to find and simple to use via the compass key, the menus contain all your GSM
phone functions. All the menus have icons or scrollable lists and are used in the same
way. The messages displayed on the screen explain to you what to do.
Press
,
or C to enter a menu or sub-menu, move + or - to scroll in a list
and press
,
to validate an entry or to confirm a choice.
Names 34
Messages 34
Send a SMS 39
Read SMS 41
SMS settings 41
SMS centre / Signature / Validity
period (Subscription dependent)
/ Reply path (Subscription
dependent) / Reply path
(Subscription dependent) / Auto
save SMS
Broadcast SMS 42
Mailboxes 43
Call list 43
Display 43
Reset 43
Organiser 44
Events 44
Day view 44
Week view 44
Month view 44
Extras 46
Call counters 46
Accumulated call timer /
Accumulated cost (subscription
dependent) / Info at call end
(subscription dependent) / Last
call information (subscription
dependent)
Euro Converter 44
Calculator 48
Alarm clock 48
Voice memo 48
Games 57
Settings 21
Sounds 21
Ringer / Ringer volume / Key
tones / Minute beep / Organiser
alerts / Organiser alerts / New
SMS tone / Vibrator
19
Display 24
Zoom / Backlight / Animation /
Contrast
Security 24
Keypad lock / Public names /
Call barring / Change codes /
PIN protection
Time and date 26
Clock display / Set date / Set
time
Hotkeys 27
Voice c omma nd 29
Network 29
Register again / Preferred list
Call settings 30
Call waiting / Caller ID /
Call forward / Autoredial /
Any key answer
Quick settings 31
Personal 32
Silence 32
Autonomy 32
Outdoors 32
Meeting 32
Operator Services 53
Services + 53
Service numbers 53
WAP 49
Launch 49
Settings 51
Access 51
Help 49
* Subscription dependent.
*
20
Menus tree
4 • S e ttin g s
Ringer volume
Introduction
The Settings menu of
your mobile phone
allows you to customise
the settings related to each available
option by defining Personnal settings.
In idle mode, press the
enter the main menu, move
select Settings, then press
Move
+
features, press
to change it as described further in the
present chapter. For each option, press
+
or - to make your choice, press
to confirm or e to cancel.
your phone and change
C
key to
+
or - to
,
.
or - to browse the available
,
to enter an option and
SETTINGS
Sounds
Display
Security
Time and Date
Hotkeys
Voice command
Network
Call settings
,
Sounds
This menu allows you to change the ringer volume, select a ringer melody
or create one, to set alert beeps and activate or deactivate the vibrator.
Ringer volume
By default the ringer volume is set to Medium. You can set the volume of your ringer
from Silent to Increasing and use a Hotkey to activate the silent mode (see page 27).
Ringer
This option enables you to select the ringer type from among 19 melodies. Scroll
through the list by moving
Ringer
melody being played. Press
melody. This menu also enables you to create your own melody as described below.
+
or - and wait for two seconds to hear the selected
,
to confirm, e to cancel, or move to the next
21
Loading...