Philips DVP5982-37 User Manual
Quick Start Guide
What’s in the box?
Quick Start
Guide
DVD Video Player
User
Manual
Composite
Audio/Video Cables
DVP 5982
DVD Video Player
Remote Control
and 2 AAA batteries
Connect
1
Composite Video CVBS
(Good Quality)
Power
OR
Component Video
(Better Quality)
Power
OR
HDMI OUT
HDMI OUT
Video
TV OUT
COMPONENT VIDEO OUT
Video
TV OUT
COMPONENT VIDEO OUT
Basic Audio/Video Connections
x
Audio
DIGITAL
OUT
AUDIO OUT
COAXIAL
DIGITAL
OUT
COAXIAL
x
AUDIO OUT
Cable not supplied
Audio
x
x
COMPONENT
VIDEO IN
TV
V (Pr/Cr)
U (Pb/Cb)
Y
TV
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
HDMI
(Best Quality)
Power
Video and Audio
TV OUT
COMPONENT VIDEO OUT
HDMI OUT
DIGITAL
OUT
COAXIAL
AUDIO OUT
x
Cable not supplied
OR
RF Modulator
RF Modulator (not supplied)
Power
Video
TV OUT
HDMI OUT
COMPONENT VIDEO OUT
1_dvp5982MKll_37_qsg_eng.indd 11_dvp5982MKll_37_qsg_eng.indd 1 2007-08-20 5:24:59 PM2007-08-20 5:24:59 PM
DIGITAL
OUT
COAXIAL
AUDIO OUT
x
Audio
x
TV
HDMI IN
TV
RF coaxial cable
not supplied
2
STANDBY-ON
Disc Lock
OSD Language ENGLISH
Sleep
FRANÇAIS
Lip Sync
DivX(r) VOD Code
General Setup Page
Set up
Enjoy
3
Finding the viewing channel
A
A Press 2 (STANDBY-ON) on this unit to turn it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
you see the Video In channel.
Select the display language on the
B
button) until
°
screen
A Press SETUP.
The { General Setup Page } appears.
Start disc playback
A
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
STW X keys to navigate in the DVD menu.
B Press PLAY/PAUSE
to start playback.
C To stop playback, press
STOP Ç.
u
Troubleshooting
For more troubleshooting
tips, see the user manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the top panel of this
unit to turn on the power.
B Press T to select { OSD Language } and press X.
C Use ST keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this unit. Refer to
the user manual for more information.
Need help?
User Manual
See the user manual that cames with your Philips DVD Player
Online
Register your product and get support at www.philips.com/welcome
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Check audio connections and make sure that the
connected audio device is turned on.
• For HDMI connection, check if your TVs HDMI or
Digital setting is set to ON. Contact your TV
manufacturer for detailed information.
Remote control does not work
• Check the batteries are loaded correctly or replace
the batteries with new ones.
• Reduce the distance between the remote control
and this unit.
• Point the remote control directly toward the IR
sensor.
2007 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp
P.O. Box 671539
Marietta, GA 30006-0026
Printed in China
0734/37_03
1_dvp5982MKll_37_qsg_eng.indd 21_dvp5982MKll_37_qsg_eng.indd 2 2007-08-20 5:25:00 PM2007-08-20 5:25:00 PM
Loading...