Register your product and get support at
www.philips.com/welcome
DVP5388K
EN User manual
Contents
1 Important 4
Safety and important notice 4
Trademark Notice 5
6 Advanced features 26
Media copy 26
Create MP3 fi les 26
7 Adjust sound 28
Karaoke settings 28
Turn off vocal (cancel voice) 28
English
Contents
2 Your DVD player 6
Features highlight 6
Product overview 7
3 Connect 9
Connect video cables 9
Connect audio cables 10
Route audio to other devices 11
Connect USB device 12
Connect to power outlet 12
4 Get started 13
Prepare the remote control 13
Find the correct viewing channel 14
Select menu display language 14
Turn on Progressive Scan 15
Use Philips EasyLink 16
5 Play 17
Play from disc 17
Play video 18
Play music 22
Play photo 23
Play from USB device 25
8 Adjust settings 29
General setup page 29
Audio setup page 30
Video setup page 33
Preference page 35
9 Additional information 38
Update software 38
Care 38
10 Specifi cation 39
11 Troubl e shootin g 41
12 Glossary 43
13 Lifetime card 45
EN 3
1 Important
Safety and important notice
connection to the ‘standard defi nition’ output. If
there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
Warning
•
R isk of overheating! Neve r inst all the DVD player
in a confi ned space. Always leave a space of at least
four inches ar ound the DVD player for ventila tion.
Ensur e the curt ains or other objec ts never cover the
ventilatio n slots on the DVD player.
•
Never place the DVD playe r, remote control or
batteries near naked fl ames or other heat sources,
including direct sunlight.
•
Only use this DVD player indoors. Keep this DVD
player away from water, moisture and liquid -fi lled
objects.
Never place this DVD player on other ele ctr ical
•
equipment.
Keep away from this DVD player during lightning
•
storms.
•
Wher e the mains plug or an appliance coupler is
used as the disconnect dev ice, the disconnec t device
shall r emain readily ope rable.
Visib le and invisible las er radiation when open. Avoid
•
exposure to beam.
This product complies with the radio
interference requirements of the European
Community. This product complies with the
requirements of the following directives and
guidelines: 2006/95/EC, 2004/108/EC.
About Progressive Scan
Consumers should note that not all high
defi nition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525 or 625
progressive scan picture problems, it is
recommended that the user switch the
Recycle notice
Your product is designed and manufactured
with highly quality material and components,
which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by
the European Directive 2002/96/EC.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
4 EN
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Trademark Notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
DivX, DivX Ultra Certifi ed, and associated
logos are trademarks of DivX, Inc. and are used
under license.
Offi cial DivX® Ultra Certifi ed product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media fi les and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
English
Important
Manufactured under license under U.S.
Patent#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and
DTS Digital Surround are registered trademarks
and the DTS logos and Symbol are trademarks
of DTS, Inc. @ 1996-2008 DTS, Inc. All Rights
Reserved.
HDMI, and HDMI logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
EN 5
2 Your DVD
ALL
player
Screen fi t
View the movie in full screen on any TV with
this DVD player.
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.philips.com/welcome.
This DVD player offers higher picture quality
video play for an amazing viewing experience.
Features highlight
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD player offers full high-defi nition video play
up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and
increased sharpness delivers a more true-to-life
picture.
EasyLink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Note
EasyLink (HDM I CEC) is only applicable with cer tain •
criteria. Terms and conditions may var y by produc t.
Consult your product dealer for information.
•
Philips does not guar ante e 100% interoper ability
with all HDM I CEC devices .
Hi speed USB 2.0 link
Simply plug your USB fl ash drive into the USB
socket to play your MP3/WMA/JPEG/DivX/
WMV fi les to enjoy the music play in superb
sound quality.
Media copy
You can transfer data fi les such as MP3, WMA
and JPEG from disc to USB fl ash drive.
Create MP3 fi les
Convert your favourite audio tracks from an
audio CD into MP3 format. The created MP3
fi les are saved in your USB fl ash drive.
Karaoke scoring function
Karaoke scoring gives a score for each
performance. Have your singing performance
scored for even more karaoke fun at home!
Region codes
Your DVD player plays discs with the following
region codes.
DVD region code Countries
Russia
6 EN
Product overview
Main unit
31 2
a 2 (Standby-on)
Turn on the DVD player or switch to •
standby mode.
b Disc compartment
c Z (Open/Close)
Open or close the disc compartment.•
d Display panel
e u (Play/Pause)
Start, pause or resume disc play.•
f x (Stop)
Stop disc play.•
g (USB) socket
Connect a USB fl ash drive.•
h MIC
Audio input from a microphone.•
Remote control
English
1
2
3
4
5
7
6
5
4
8
6
7
8
9
10
a 2 (Standby-On)
Turn on the DVD player or switch to •
standby mode.
Press and hold to turn off the DVD •
player and all HDMI CEC compliant
devices.
b Z (Open/Close)
Open or close the disc compartment.•
c DISC MENU
Access or exit the disc menu.•
Switch to disc mode.•
For VCD/SVCD, turn PBC (Playback •
Control) on or off in PBC mode.
18
17
16
15
14
13
12
11
Your DVD player
EN 7
d v V b B (Navigation buttons)
Navigate through the menus.•
Search fast-forward (• B) or fast-
backward (b). Press repeatedly to
change the search speed.
Search slow-forward (• v) or slowbackward (V). Press repeatedly to
change the search speed.
e BACK
Return to the previous display menu.•
For DVD, navigate to the title menu.•
For VCD version 2.0 or SVCD with •
PBC turned on, return to the menu.
f í/ë (Previous/Next)
Skip to the previous or next title, •
chapter, or track.
Press and hold for fast-backward or •
fast-forward search.
g (USB)
Switch to USB mode and display the •
content.
h Numeric buttons
Select an item to play.•
i SUBTITLE
Select DVD or DivX subtitle language.•
Access the menu to USB copy or USB •
delete.
j , ZOOM
Fit the picture format to the TV screen.•
Zoom in or out of the picture.•
k VOCAL
Change the audio channel of a karaoke •
disc.
l KARAOKE
Access or exit the karaoke menu.•
m AUDIO/CREATE MP3
Select an audio language/channel.•
Access the menu to create MP3.•
n x (Stop)
Stop disc play.•
o u (Play/Pause)
Start, pause or resume disc play.•
p INFO
For disc, display the current status or •
disc information.
For slideshows, display a thumbnail view •
of photo fi les.
q OK
Confi rm an entry or selection.•
r SETUP
Access or exit the setup menu.•
8 EN
3 Connect
Make the following basic connections to use the
DVD player.
Basic connections:
Video cables•
Audio cables•
Optional connections:
Audio to other devices:•
Multi channel receiver•
Digital amplifi er/receiver•
Analogue stereo system•
Note
Refer to t he type plate at the r ear or bottom of the •
product for ident ifi cation and supply r atings.
•
Befor e you make or change any connections, ensur e
that all the devices are disconnec ted fr om the p ower
outlet.
Tip
Differen t types of connectors may be used to •
connect this product to your TV, depending on
availabili ty and your needs. A compre hensive
inter active guide to help you connect your produc t is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to the TV to view
disc play.
Select the best video connection that the TV can
support.
Option 1:• Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2:• Connect to component video
sockets (for a standard TV or Progressive
Scan TV).
Option 3:• Connect to video (CVBS) socket
(for a standard TV).
Note
You must connect this • DVD player directly to a
TV.
Option 1: Connect to HDMI socket
HDMI IN
HDMI OUT
1 Connect a HDMI cable (not supplied) to
the HDMI OUT socket on this DVD
player and the HDMI input socket on the
TV.
Use a HDMI-DVI adaptor in case the •
TV has only a DVI connection.
Note
If the device suppor ts H DMI CEC, you can control •
compliant devices with a single re mote control (see
chapter ‘Use Philips Eas yLin k’ ).
English
Connect
This type of connections p rovide best picture qualit y.•
Tip
EN 9
Option 2: Connect to component
video sockets
Pb
Pr
Y
Pr
Y
COMPONENT VIDEO OUT
Pb
COMPONENT
VIDEO IN
1 Connect the component video cables (not
supplied) to the Y Pb Pr sockets on this
DVD player and the component video
input sockets on the TV.
If a progressive scan TV is used, you •
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tip
The component video input sockets on the TV may •
be labelled a s Y Pb/Cb Pr/Cr or Y UV.
This type of connection provides good picture
•
quality.
Option 3: Connect to video (CVBS)
socket
VIDEO IN
1 Connect a composite video cable
(supplied) to the TV OUT socket on this
DVD player and the video input socket on
the TV.
Tip
The video inp ut socket on the TV may b e labelled as •
A/ V IN, V IDEO IN, COMPOSITE or BASEB AND.
This type of connection provides standard pic ture
•
quality.
Connect audio cables
Connect the audio from this DVD player to the
TV to allow sound output through the TV.
10 EN
AUDIO IN
FRONT L
FRONT R
1 Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R sockets on this
DVD player and the audio input sockets
on the TV.
Route audio to other devices
Connect to digital amplifi er/receiver
Route the sound from this DVD player to other
devices to enhance audio play.
Connect to multi channel receiver
MULTI CHANNEL
AUDIO IN
FRONT L
FRONT R
REAR L
REAR R
FRONT L
CENTER
SUBWOOFER
FRONT R
REAR L
REAR R
CENTER
SUBWOOFER
1 Connect the audio cables (not supplied) to
the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) sockets
on this DVD player and the audio input
sockets on the device.
DIGITAL IN
DIGITAL
OUT
COAXIAL
1 Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT socket on
this DVD player and the COAXIAL/
DIGITAL input jack on the device.
Tip
You can optimise th e audio output (see chapter •
‘Adjust sett ings’ - [ Audio Set up Page ] > [ Digital
Audio Setup ]) for details.
Connect to analogue stereo system
AUDIO IN
FRONT L
FRONT R
English
Connect
Tip
You can optimise th e audio output (see chapter •
‘Adjust sett ings’ - [ Audio Set up Page ] > [ Analog
Output ]) for details.
1 Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R sockets on this
DVD player and the audio input sockets
on the device.
Tip
You can optimise th e audio output (see chapter •
‘Adjust sett ings’ - [ Audio Set up Page ] > [ Analog
Output ]) for details.
EN 11
Connect USB device
1 Connect the USB fl ash drive to the
(USB) socket on this DVD player.
Note
This DVD player can only play/view MP3 , WMA , •
DivX, J PEG or W MV fi les that are stored on such
devices.
Press
• to access the content and play the fi les.
Connect to power outlet
Warning
Risk of product damage! E nsure that the power •
suppl y voltage cor responds to the voltage printed on
the back or the under side of the DVD player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
12 EN
4 Get started
Navigate through the menu
Prepare the remote control
1 Push to open the battery compartment
cover.
2 Insert two R03 or AAA batteries type with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they a re exhausted or if the •
remote contr ol is not to be used for a long time.
Do not mix batteries (old and new or car bon and
•
alkaline, etc.).
Batteries cont ain chemical subs tances, they should
•
be disposed of f properly.
1 Point the remote control directly at the
remote sensor on this DVD player and
select the desired function.
2 Use the following buttons on the remote
control to navigate through the on-screen
menus.
Button Action
v V
b B
OK
Move up or down.
Move left or right.
Confi rm a selection.
Enter numbers.
English
Get started
EN 13
Find the correct viewing
channel
Press 2 to turn on the DVD player.
1
2 Turn on the TV and switch to the correct
video-in channel.
You may go to the lowest channel on •
the TV, then press the Channel Down
button on the TV remote control until
you see the Video In channel.
You may press • ° button repeatedly
on the TV remote control.
Usually this channel is between the •
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
Tip
See the TV user manual on how to selec t the co rre ct •
input on the T V.
If the audio ou tput of this DVD player is routed
•
to other audio d evice (such as aud io sys tem
or receiver), turn on the audio device to the
appropriate audio inpu t channel. Refer to the device
user ma nual for details.
Select menu display language
Note
You can ski p this setting if this DVD player is •
connected to a HDMI C EC compliant T V. It switches
automatically to t he same OSD menu language as
per your TV setting.
1 Press SETUP.
[ General Setup Page ] menu is
displayed.
2 Select [ OSD Language ], then press B.
General Setup Page
Disc Lock
OSD Language
Sleep
Lip Sync
Volume
Auto Standby
DivX(R) VOD Code
Auto (RUS)
ENGLISH
POLSKI
РУССКИЙ
The language options are different •
depending on your country or region.
It may not correspond to the illustration
shown here.
3 Press vV to select a language, then press
OK.
14 EN
Tip
You can set the default language for DVD audio •
and disc menu, see cha pter ‘Adjust settings’ - [
Preference Page ] for details.
Turn on Progressive Scan
Connect a progressive scan TV with
component video sockets (see chapter
‘Connect video cables - Option 2: Connect to
component video sockets’ for details).
1 Turn on the TV to the correct viewing
channel for this DVD player.
2 Press SETUP.
3 Press B repeatedly to select [ Video Setup
Page ].
4 Select [ Progressive ] > [ On ]
OK.
A warning message is displayed.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
On
Off
then press
,
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
The progressive scan setting will not be available •
when the HDM I vide o signa l is detected.
During play, when progressive scan mode is on for
•
both th is DVD player and t he TV, distor ted pictur e
may disp lay. Turn off t he progressive sc an feat ure on
both th is DVD player and t he TV.
English
Get started
5 To proceed, select [ OK ] and press OK.
The progressive setup is complete.
Note
If a blan k/distor ted screen is displayed, wait for 15 •
seconds for the auto recover.
•
If no pic ture displayed, turn of f the pr ogressive scan
mode as follows:
1) Press Z to open the disc compar tment.
2) Press the numeric button ‘1’.
6 To exit the menu, press SETUP.
EN 15
Use Philips EasyLink
The DVD player supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLinkcompliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
1 Turn on the HDMI CEC operations on the
TV and other connected devices. See TVs/
devices manual for details.
2 You can now enjoy the following Philips
EasyLink controls.
Auto Wake Up TV (One-touch play)
When you press the STANDBY button, it turns
on the TV and this DVD player, then video disc
play starts.
To enable One-touch play, a video disc •
must be placed in the disc compartment
before operation.
System Standby (One-touch standby)
When you press and hold the STANDBY button,
all connected HDMI CEC devices switch to
standby mode simultaneously.
Tip
The default s etting for EasyLink features is on. You •
can cha nge the default set ting , see chapter ‘Adjust
settings’ - [ Video Setup Page ] > [ HDMI S etup ] > [
EasyLink ] for details.
16 EN
5 Play
Play from disc
Note
DVDs and DVD players ar e designed with regiona l •
restric tions. Ens ure that the DV D video you play is
for the same re gion zone as the player ( indicated on
its back).
•
This DVD player can suppor t play of the following
fi le formats: MP3/WMA/JPEG/DivX/WMV.
•
About WMV 9 - this DVD player only supports Main
Profi le (low level) and Simple Profi le. Ad vanced
Profi le and DRM -pr otec ted video fi les are not
supported.
To play DVD- R, DVD+R or DVD -RW, the disc must
•
be fi nalised.
Play a disc
Caution!
Never place any objec ts other than discs i nto the •
disc compartment.
Tip
If the pa sswo rd ent ry menu is displayed, you have to •
enter the passwor d befor e it can be played.
•
If you pau se or stop a disc for abou t 5 minu tes, the
screen saver acti vates. To deactivate the screen
saver, press DISC MENU.
•
After you pause or stop a disc , if no buttons
are pr essed within 15 minutes, this DVD player
automatically switches to standby mode.
English
Play
1 Press Z to open the disc compartment.
2 Insert a disc with its label facing up.
For double-sided disc, load the side to •
play faces up.
3 Press Z to close the disc compartment
and start disc play.
To view disc play, turn on the TV to •
the correct viewing channel for this
DVD player.
4 To stop disc play, press x.
EN 17
Play video
Change video play
Note
For vid eo disc, play always resumes from the point •
wher e it was last stopped. To start play from the
begin ning, press
í while t he message is displayed.
Control a title
1 Play a title.
2 Use the remote control to control the title.
Button Action
u
x
ë
í
, M
m
v
, V Searches slow-forward (v) or
Start, pause or resume disc
play.
Stop disc play.
Skip to the next title or
chapter.
Skip to the beginning of the
current title or chapter.
Press twice to jump to the •
previous title or chapter.
Searches fast-forward (M)
or fast-backward (m).
Press repeatedly to change •
the search speed.
slow-backward (V).
Press repeatedly to change •
the search speed.
For VCD/SVCD, slow-•
backward search is not
possible.
1 Play a title.
2 Use the remote control to change the
video play.
Button Action
AUDIO/
CREATE MP3
SUBTITLE
, ZOOM
(Screen Fit)
, ZOOM
INFO
Note
Some operations may not work with some discs. See
•
the information accompanying the disc for details.
Change audio language.
Only applicable to discs •
with multiple audio
language or channel.
Change subtitle language.
Only applicable to discs •
with multiple subtitle
language.
Fit the picture format to the
TV screen.
Press repeatedly until the •
image is scaled to fi t to
the TV screen.
Toggle between screen
aspect ratio and different
zoom factor.
To pan through the •
zoomed image, press the
navigation buttons.
Display the current status or
disc information.
You can change the video •
play options here without
interrupting disc play.
.
18 EN
Access DVD menu
Preview disc contents
English
Play
1 Press DISC MENU to access disc main
menu.
2 Select a play option, then press OK.
In some menus, press the • numeric
buttons to input your selection.
To return to the title menu during play, •
press BACK.
Access VCD menu
The PBC (Playback Control) for VCD/SVCD is
turned on by default in the factory. When you
load in a VCD/SVCD, the contents menu is
displayed.
1 Press numeric buttons to select a play
option, then press OK to start play.
If PBC is off, it skips the menu and starts •
play from the fi rst track.
During play, you can press • BACK to
return to the menu (if the PBC mode is
on).
Tip
The default s etting for PBC is on. You ca n change the •
default set ting, see chapter ‘Adjust settings’ -
[ Preference Page ] > [ PBC ] for details.
1 During play, press INFO.
The disc status menu is displayed.
2 Select [ Preview ], then press B.
DVD
Select Digest Type:
Title Digest
Chapter Digest
Title Interval
Chapter Interval
VCD/SVCD
Select Digest Type:
Track Digest
Disc Interval
Track Interval
3 Select a preview option, then press OK.
A six thumbnails preview screen is
displayed.
To go to the next/previous preview •
screen, pressí/ë.
To start play, press • OK at the selected
thumbnail picture.
EN 19
Quick skip play to a specifi c time
View DVD play from different angles
1 During play, press INFO.
The disc status menu is displayed.
2 Select the current elapsed playing time,
then press B.
[ TT Time ]• (title time)
[ CH Time ] • (chapter time)
[ Disc Time ] • (disc time)
[ Track Time ] • (track time)
3 Press the numeric buttons to change the
time where you want to skip to.
Display play time
1 During play, press INFO.
The disc status menu is displayed.
2 Select [ Time Disp ], then press B.
The display options are different
depending on the disc type.
Option Action
[ Title Elapsed ]
/ [ Chapter
Elapsed ]
[ Title Remain ]
/ [Chapter
Remain ]
[ Total Elapsed
] / [Single
Elapsed ]
[ Total Remain
] / [Single
Remain ]
Display DVD title or chapter
elapsed play time.
Display DVD title or chapter
remaining play time
Display VCD/SVCD disc or
track elapsed play time.
Display VCD/SVCD disc or
track remaining play time.
3 Select an option, then press OK.
1 During play, press INFO.
The disc status menu is displayed.
2 Select [ Angle ], then press B.
3 Press the numeric buttons to change the
angle.
Play changes to the selected angle.
Note
Only applicable to discs contain seque nces recorded •
from different camer a angl es.
Repeat play - video
For DVD/VCD/SVCD
1 During play, press INFO.
The disc status menu is displayed.
2 Select [ Repeat ] in the menu, then press
B.
3 Press vV to select a repeat option, then
press OK.
Note
For VCD/SVCD, repeat play is onl y possi ble if PBC •
mode is turned off.
20 EN
Set repeat play for a specifi c section
Play DivX® video
1 During play, press INFO.
The disc status menu is displayed.
2 Select [ Repeat AB ] in the menu, then
press OK at the start point.
3 Press OK again to set the end point.
Repeat play starts.
4 To cancel repeat play, press OK again.
Note
The marked section for repeat play is onl y possi ble •
within a title or tr ack.
DivX video is a digital media format that retains
high quality despite a high rate of compression.
This DVD player is DivX® Certifi ed so that
you can enjoy DivX video.
1 Insert a disc or USB that contains the DivX
videos.
For USB, press •
A contents menu is displayed.
.
2 Select a title to play, then press OK.
3 Use the remote control to control the
title.
Button Action
SUBTITLE
AUDIO/
CREATE MP3
x
INFO
Change subtitle language.
Change audio language/
channel.
Stop disc play.
For DivX, the contents •
menu is displayed.
For DivX Ultra video, •
press this button again
to display the contents
menu.
Display title elapsed play •
time or title remaining
play time.
Display DivX Ultra video •
information.
English
Play
Note
You can only play DivX videos that were rented or •
purchased w ith the DivX regist ration code of this
DVD playe r (see chapter ‘Adjust set tings’ - [ Gene ral
Setup Page] > [ DivX(R) VOD Code ] for details).
•
If the subtitle does not appear cor rec tly, cha nge the
subti tle la nguage (see chapter ‘Adjust set tings’ -
[ Preference Page ] > [ DivX Subtitle ] for details).
EN 21
Play music
Quick skip play
Note
For some commercial audio disc, play may resume •
from the point wher e it was last stopped. To star t
play from fi rst t rack, press
í.
Control a track
1 Play a track.
2 Use the remote control to control the
track.
Button Action
u
x
ë
í
Start, pause or resume disc
play.
Stop disc play.
Skip to the next track.
Skip to the beginning of the
current track. Press twice to
jump to the previous track.
Select an item to play.
1 During play, press INFO until one of
the following options is selected.
Display Action
[ Disc Go
To ]
[ Track Go
To ]
[ Select
Track ]
Skip play to a specifi c time
within the disc.
Skip play to a specifi c time
within a track
Skip play to a specifi c track
number.
2 Press the numeric buttons to change the
time/number where you want to skip to.
Repeat play - audio
For audio CD
1 During play, press INFO repeatedly
until [ Off ] is selected.
2 Press b B to select a repeat option.
For MP3/WMA fi les
1 During play, press INFO to select a
repeat option.
, M Searches fast-forward (M)
m
or fast-backward (m).
Press repeatedly to change •
the search speed.
22 EN
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio fi le (fi les with .mp3, .wma extensions).
1 Insert a disc or USB that contains the MP3/
WMA music.
For USB, press •
A contents menu is displayed.
Play starts.
.
2 Select a track to play if play does not start
automatically.
To select another track/folder, press •
vV, then press OK.
3 To return to the main menu, press v until
the root menu is selected, then press OK.
Note
For CDs r ecorded in multiple sess ions, only the fi rst •
session is played.
This DVD player does not suppor t MP3PRO audio
•
format.
If any special character s are present in the MP3
•
track name (ID3) or albu m name , it may not display
correctly on the s cree n because these char acters are
not suppor ted.
•
Some WMA is protected by Dig ital Rights
Management (DRM), it ca nnot be played on this
DVD playe r.
Folders/fi les exceed the supported limit of this DVD
•
player a re not displayed or played.
Play photo
Play photos as slideshow
This DVD player can play JPEG photos (fi les
with .jpeg or .jpg extensions).
1 Insert a disc or USB that contains the JPEG
photos.
For USB, press •
For a Kodak disc, the slideshow begins
automatically.
For a JPEG disc, the photo menu is
displayed.
.
2 Select the folder/album you want to play.
To preview the photos in the folder/•
album, press
INFO.
English
Play
Tip
You can display the data disc conte nts wi thou t •
folders, see chapter ‘Adjust set tings’ - [ Prefe rence
Page ] > [ Mp3/Jpeg Nav ] for details.
To go to previous or next screen •
display, press í/ë.
To select a photo, press the • navigation
buttons.
To display the selected photo only, •
press OK.
3 Press OK to start slideshow play.
To return to the menu, press • BACK.
EN 23
Note
You may require longer time to display the disc •
content on the T V due to the large number of songs/
photos compiled onto one disc.
•
If the JPEG photo is not recorded wit h an ‘exif ’ type
fi le, the ac tual t humbnail pictur e is not be shown
on the display. It is replaced by a ‘blue mountain’
thumbnail picture.
This DVD player can only display digital ca mera
•
pictures according to the JPEG -E XIF format , typically
used by almost all digital c amer as. It can not display
Motion JPEG and pic ture s in formats other than
JPEG , or sound clips associated with pictures.
•
Folders/fi les exceed the supported limit of this DVD
player a re not displayed or played.
Control photo play
1 Play photo slideshow.
2 Use the remote control to control the
photo.
Button Action
b
B
v
V
, ZOOM
Rotate the photo anticlockwise.
Rotate the photo clockwise.
Flip the photo vertically.
Flip the photo horizontally.
Zoom in/ out.
Play pause in zoom mode.•
Play musical slideshow
Play MP3/WMA music fi les and JPEG photo
fi les simultaneously to create musical slideshow.
The MP3/WMA and JPEG fi les must be stored
on the same disc.
1 Play MP3/WMA music.
2 Navigate to the photo folder/album and
press OK to start slideshow play.
Slideshow begins and continues till the
end of the photo folder or album.
Audio continues to play till the end of
the disc.
To return to the menu, press • BACK.
3 To stop slideshow play, press x.
4 To stop music play, press x again.
x
24 EN
Stop disc play.
Play from USB device
This DVD player plays/views MP3, WMA, DivX
, JPEG or WMV fi les that are stored on USB
device.
1 Connect a USB fl ash drive to the
(USB) socket on this DVD player.
2 Press .
A contents menu is displayed.
Play starts.
3 Select a fi le to play if play does not start
automatically.
For more information, see chapters •
‘Play music, Play photo, Play video’ for
details.
4 To stop play, press x or remove the USB
device.
To switch to the disc mode, press •
or DISC MENU.
English
Play
Tip
If the device do es not fi t into the USB socket, •
connect it through a USB extension cable.
•
Digital cameras that require additional pr ogramme
inst allation when conn ected to a PC ar e not
supported.
EN 25
6 Advanced
features
Media copy
You can transfer data fi les such as MP3, WMA
or JPEG from disc to the USB device.
Note
While you copy, neve r pres s any buttons. •
Copy-protected m edia cannot be copied. •
Create MP3 fi les
You can convert audio CDs into MP3 audio
fi les with this DVD player. The created MP3
audio fi les are saved in the USB device.
1 Insert a disc contains the MP3/WMA/JPEG
fi les.
2 Press x to stop disc play.
3 Connect the USB fl ash drive to the
(USB) socket on this DVD player.
4 Select the fi le to copy, then press
SUBTITLE.
5 Select [ Yes ] in the menu to start to copy,
then press OK.
00:00/00:00 005/030
\MP3
Previous
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Once complete, a new folder is created
Do you want
to copy this file
Yes No
automatically in the USB device to store
all the new data fi les.
6 To stop copy progress, press x, then
press OK.
1 Insert an audio CD.
2 Connect the USB fl ash drive to the
(USB) socket on this DVD player.
3 During disc play, press AUDIO/CREATE
MP3.
4 Select [ Yes ] in the menu and press OK.
OPTIONS
Speed Normal
Bitrate 128kbps
CRT ID3 Yes
Device USB 1
Summary
Press [OK] button
to change speed.
Start Exit
Create MP3
TRACK
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Select all
Deselect all
5 Select the conversion options in the
[ OPTIONS ] panel and press OK.
26 EN
Option Description
[ Speed ]
[ Bitrate ]
[ CRT ID3 ]
[ Device ]
Select the write-to-fi le speed.
If • [ Normal ] speed is
selected, music play can be
heard while creating the
MP3 fi le.
Select the quality level.
Higher bitrate for better sound
quality and bigger fi le size.
Default setting is • [ 128
kbps ].
Copy track information into
the MP3 fi le.
Default setting is • [ Yes ].
The created MP3 fi les can
only be saved in USB device.
6 Press B to access the [ TRACK ] panel.
7 Select the audio track, then press OK.
To select another track, repeat step 7.•
To select all tracks, select • [ Select all ]
in the menu and press OK.
To deselect all tracks, select • [ Deselect
all ] in the menu and press OK.
8 Select [ Start ] in the menu to start to
convert, then press OK.
Once complete, a new folder is created
automatically in the USB device to store
all the new MP3 fi les.
To exit the menu, select • [ Exit ] and
press OK.
English
Advanced features
Note
While you convert , never press any but tons . •
DTS CDs and copy-protected CDs cannot be •
conver ted.
•
Write-pr otec ted or password-protected USB
devices cannot be used to store MP3 fi les.
EN 27
7 Adjust sound
Karaoke settings
[ Karaoke Scoring ]: Select a karaoke rating
score level.
[ Off ]• – no score rating display.
[ Basic ]• – basic rating.
[ Intermediate ]• – intermediate rating.
[ Advance ]• – advance rating.
1 Turn on the TV to the correct viewing
channel for this DVD player.
2 Connect a microphone (not supplied) to
MIC socket on this DVD player.
3 Press KARAOKE repeatedly to access
various setting options.
[ MIC ]: Press b B to turn on or off
microphone output.
[ Vol ]: Press b B to set the microphone
volume level.
[ Echo ]: Press b B to set the echo level.
[ Key ]: Press b B to set the pitch level that
match your voice.
Note
If you score 30 points and above at the en d of the •
song, a k araoke score is dis played . Press OK to exit
and resume karaoke sess ion.
•
Karaoke score function is only available for DVD and
VCD disc s.
Set the microphone volume to the minimum level
•
before connecting the microphone to pr event
howling.
Turn off vocal (cancel voice)
1 Press VOCAL repeatedly to toggle
through various audio modes or turn off
the vocal.
Note
You cannot cancel the voice outpu t from MP3 discs.•
28 EN
8 Adjust settings
This section describes the various setting
options of this DVD player.
Note
If the setup option is greyed out, it means the setting •
cannot be changed at the current state.
General setup
Press SETUP.
1
[ General Setup Page] menu is
displayed.
2 Select an option, then press OK.
General Setup Page
Disc Lock
OSD Language
Sleep
Lip Sync
Volume
Auto Standby
DivX(R) VOD Code
3 Select a setting, then press OK.
To return to the previous menu, press •
b.
To exit the menu, press • SETUP.
Note
See the explanations of the above options in the •
following pages.
[ Disc Lock ]
Set play restriction for a specifi c discs.
Before you start, place the disc in the disc
compartment (maximum 20 discs can be
locked).
[ Lock ] • – restrict access to the current
disc. The next time you want to play
this disc or unlock it, you need to enter
the password.
[ Unlock ]• – play all discs.
Tip
You can set or change the password, go to •
[ Preference Page] > [ Password ].
[ OSD Language ]
Select the default on-screen menu
language.
[ Sleep ]
Switch to standby automatically after the
preset time.
[ Off ]• – disable sleep mode.
[ 15 Mins ]• , [ 30 Mins ], [ 45 Mins ],
[ 60 Mins ] – select the count down
time before the DVD player switches
to standby.
[ Lip Sync ]
Set the default delay time for audio output
when you play a video disc.
Press 1. OK.
Press 2. b B to set the delay time.
Press 3. OK to confi rm and exit.
English
Adjust settings
EN 29
[ Volume ]
Set the default volume level when you play
a disc.
Press 1. OK.
Press 2. b B to set the volume.
Press 3. OK to confi rm and exit.
[ Auto Standby ]
Turn off or on automatic standby switching
mode. It is an energy saving feature.
[ On ]• – switch to standby after 15
minutes of inactivity (for example, in
pause or stop mode).
[ Off ]• – disable auto standby mode.
[ DivX(R) VOD Code ]
Display the DivX® registration code.
Tip
Enter t his DVD player’s DivX registration code w hen •
you ren t or purchase video f rom w ww.divx .com/vod.
The DivX videos rente d or pur chased through th e
DivX® VOD ( Video On Demand) service can be
played only on the device to which it is re gistered.
Audio setup
Press SETUP.
1
[ General Setup Page ] menu is
displayed.
2 Press B repeatedly to select [ Audio
Setup Page ].
3 Select an option, then press OK.
Audio Setup Page
Analog Output
Digital Audio Setup
HDMI Audio
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
4 Select a setting, then press OK.
To return to the previous menu, press •
b.
To exit the menu, press • SETUP.
Note
See the explanations of the above options in the •
following pages.
30 EN
[ Analog Output ]
Select the analogue audio setting based on
the audio device that is connected through
the analogue audio socket.
[ Stereo ]• – for stereo output.
[ LT/RT ]• – for surround sound output
through two speakers.
[ Multi Channel ]• – for multi channel
output.
[ Digital Audio Setup ]
Select the setting based on the digital
amplifi er/receiver that is connected
through the digital socket.
[ Digital Output ]• – select the type of
digital output.
Option Description
[ Off ] Disable digital output.
[ All ] The device supports
multi-channel audio
formats.
[ PCM Only ] The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to twochannel sound: see
LPCM Output ]
[
setting.
[ LPCM Output ]• – select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
Option Description
[ 48k ] For discs recorded at
sampling rate of 48 kHz.
[ 96k ] For discs recorded at the
sampling rate of 96 kHz.
Note
[ Digit al Audio Setup ]• setting is only available if the
[ HDMI Audio ] is se t to [ Off ].
• setting is only available if the
[ LPCM Output ]
[ Digit al Output ] is set to [ PCM only ].
•
The hig her th e sampling rate, the bet ter the sound
quality.
[ HDMI Audio ]
Select the audio output setting when you
connect this DVD player and the TV with
a HDMI cable.
[ On ]• – audio output through the TV.
[ Off ]• – disable audio output from the
TV.
[ Sound Mode ]
Select a preset sound effect to enhance
the audio output.
[ 3D ]• – select a virtual surround sound
effect that is produced from the left and
right audio channels.
[ Movie Mode ]• – select a sound effect
for movies.
[ Music Mode ]• – select a sound effect
for music.
[ Speaker Setup ]
When you connect a speaker system, you
can optimise surround output for the
connected speakers.
[ Front Speaker ]•
Option Description
[ Large ] Produce low frequency
signal below 120 Hz.
[ Small ] Cannot produce low
frequency signal below
120 Hz.
English
Adjust settings
EN 31
[ Center Speaker ] / [ Rear Speaker ]•
Option Description
[ Large ] Produce low frequency
signal below 120 Hz.
[ Small ] Cannot produce low
frequency signal below
120 Hz.
[ Off ] No speaker is
connected.
[ • Speakers Delay ] – Set the delay time
for the centre, subwoofer and rear
speakers if they are placed closer to the
listening position, so that the sound
output from all speakers reach the
listening position at the same time.
Press 1. OK.
Selec t a speaker, then press 2. b B to
set the delay time.
Press 3. OK to confi rm and exit.
[ Subwoofer ]•
Option Description
[ On ] A subwoofer is
connected.
[ Off ] No subwoofer is
connected.
[ • Speakers Volume ] – Set the volume
level of each speaker to get the ideal
audio balance.
Press 1. OK.
Selec t a speaker, then press 2. b B to
adjust the volume.
Press 3. OK to confi rm and exit.
Note
[ Speaker Setup ]• setting is only available if you have
set the [ Analog Outpu t ] setting to [ Multi Ch annel
].
[ CD Upsampling ]
For better sound quality in stereo mode,
convert the music CD to a higher sampling
rate.
[ Off ]• – turn off CD-upsampling.
[ 88.2kHz (X2) ]• – convert to twice the
original sampling rate.
[ 176.4kHz (X4) ]• – convert to four
times the original sampling rate.
[ Night Mode ]
You can play DVDs with Dolby Digital
mode at a low volume, without disturbing
others. High volume output is decreased
and low volume output is increased to an
audible level.
[ On ]• – turn on night mode.
[ Off ]• – enjoy surround sound with its
full dynamic range.
32 EN
Video setup
Press SETUP.
1
[ General Setup Page ] menu is
displayed.
2 Press B repeatedly to select [ Video Setup
Page ].
3 Select an option, then press OK.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
4 Select a setting, then press OK.
To return to the previous menu, press •
b.
To exit the menu, press • SETUP.
Note
See the explanations of the above options in the •
following pages.
[ TV Type ]
If the video does not appear correctly,
change the setting. By default, this setting
matches the most common setting for TVs
in your country.
[ PAL ]• – for PAL-system TV.
[ Multi ]• – for TV that is compatible
with both PAL and NTSC.
[ NTSC ]• – for NTSC-system TV.
[ TV Display ]
Select the screen format according to how
you want the picture to appear on the TV.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
[ 4:3 Pan Scan ]• – for standard TV, a
full-height screen display with the sides
trimmed.
[ 4:3 Letter Box ]• – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
[ 16:9 ]• – for wide-screen TV (frame
ratio 16:9).
[ Progressive ]
If a progressive scan TV is not connected
through HDMI cable, turn on progressive
scan mode.
[ On ]• – turn on progressive scan
mode.
[ Off ]• – disable progressive scan mode.
Tip
Ther e is more deta iled description available. See •
chapter ‘Get Star ted - Turn on Progressive Scan’ for
details.
English
Adjust settings
EN 33
[ Picture Setting ]
Select a predefi ned set of picture colour
settings or customise the personal setting.
[ Standard ]• – original colour setting.
[ • Vivid ] – vibrant colour setting.
[ • Cool ] – soft colour setting.
[ Personal ]• – customise the colour
setting. Set the level of brightness,
contrast, sharpness and colour
saturation, then press OK.
[ HD JPEG ]
Enjoy untouched and uncompressed JPEG
pictures at it’s original resolution when you
connect this DVD video player and the TV
with a HDMI cable.
[ On ] • – display high defi nition picture.
[ Off ] • – display standard picture.
Note
This DVD video p layer suppor ts the resolution •
display of 720p and above.
[ HDMI Setup ]
When you connect this DVD player and
the TV with a HDMI cable, select the best
HDMI setup that the TV can support.
[ Resolution ] • – select a video
resolution that is compatible with the
TV display capability.
Option Description
[ Auto ] It detect and select
the best supported
video resolution
automatically.
[ 480p ], [ 576p ],
[ 720p ], [ 1080i ],
[ 1080p ]
Select a video
resolution that best
supported by the TV.
See the TVs manual
for details.
Note
If the setting is not compatible wi th the T V, a blank •
screen appe ars . Wait for 15 seconds for auto
recove r or switch to its default mode as follows:
1) Press Z to open the disc compar tment.
2) Press numeric button ‘1’.
[ Wide Screen Format ] • – defi ne the
wide screen format for disc play.
Option Description
[ Super Wide ] Centre position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars are
displayed on both sides
of the screen. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ Off ] Picture will be displayed
according to the format
of the disc.
Note
This se tting is only available if you have set the • [ TV
Display ] setting to [ 16:9 ].
34 EN
[ • EasyLink ] – if this DVD player is
connected to HDMI CEC compliant
TV/devices, all connected devices can
respond to the following commands
simultaneously:
Option Description
[ Auto Wake
Up TV ]
[ System
Standby ]
Note
Philips does not guar ante e 100% interoper ability •
with all HDM I CEC compliant devices.
You must turn on th e HDMI CEC operat ions on
•
the TV/devices before you can e njoy the Easy Link
controls. See the T Vs/devices manual for details.
When you press the
STANDBY button, it
turns on the TV and this
DVD player, then video
disc play starts (if a video
disc is found in the disc
compartment).
To disable this feature, •
select [ Off ]
When you press and
hold the STANDBY
button, all connected
HDMI CEC devices
switch to standby mode
simultaneously.
To disable this feature, •
select [ Decline ].
Preference
Press SETUP.
1
[ General Setup Page ] menu is
English
displayed.
2 Press B repeatedly to select [ Preference
Page ].
3 Select an option, then press OK.
Preference Page
Audio
.
Subtitle
Disc Menu
Parental
PBC
Mp3/Jpeg Nav
Password
DivX Subtitle
Adjust settings
4 Select a setting, then press OK.
To return to the previous menu, press •
b.
To exit the menu, press • SETUP.
Note
Stop disc play before you can access to • [ Preference
Page ].
See the explanations of the above options in the
•
following pages.
EN 35
[ Audio ]
Select the default audio language for
DVDs.
[ Subtitle ]
Select the default subtitle language for
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
Note
If the la nguage you have set is not av ailable on the •
disc, t he disc uses it s own default language.
•
For some DVDs, t he subtitle/audio language ca n only
change from the disc menu.
To select t he lang uages that ar e not lis ted in t he
•
menu, selec t [ Others ]. Then check the L anguage
Code list at the back of this use r manual and enter
the respec tive language code.
[ PBC ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
[ On ]• – an index menu is displayed
when you load a disc for play.
[ Off ]• – skip the menu and start play
from the fi rst track.
[ Mp3/Jpeg Nav ]
Select to display the folders or display all
the fi les.
[ • Without Menu ] – display all the fi les.
[ • With Menu ] – display the folders of
MP3/WMA fi les.
Note
This se tting is not available for USB mode .•
[ Parental ]
Restrict access to DVDs that are unsuitable
for children. These types of DVDs must be
recorded with ratings.
Press 1. OK.
Selec t a rating level, then press 2. OK.
Press the 3. numeric buttons to enter
the password.
Note
Rated DVDs above the level you set in • [ Parental ]
require a password to be played.
The ratings are countr y-dependent. To allow all discs
•
to play, select ‘ 8’.
•
Some DVDs have rating s printed on them bu t are
not recorded with r atings. This functio n has no effec t
on such DV Ds.
Tip
You can set or change the password, go to•
[ Preference Page ] > [ Password ].
36 EN
[ Password ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Preference Page
Change password
Old Password
New Password
Confirm PWD
OK
Press the 1. numeric buttons to enter
‘136900’ or the last set password at [
Old Password ] fi eld.
Enter the new password at 2. [ New
Password ] fi eld.
Enter the new password again at 3.
[ Confi rm PWD ] fi eld.
Press 4. OK to exit the menu.
Note
If you for get th e pass word , enter ‘136900 ’ befor e •
you set a new pass word .
[ DivX Subtitle ]
Select a character set that supports the
DivX subtitle.
[ Standard ] English, Irish, Danish,
Estonian, Finnish, French,
German, Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
[ Cyrillic ] Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian
Note
Ensur e that the subtitle fi le ha s the exact same fi le •
name as the movie fi le. If for example the fi le name
of the mov ie is ‘Movie.avi’, then you will need to
name the tex t fi le ‘Movie.sub’ or ‘Movie.srt’.
[ Default ]
Reset all the settings of this DVD player to
factory default, except for [ Disc Lock ],
[ Parental ] and [ Password ] settings.
English
Adjust settings
EN 37
9 Additional
Care
information
Update software
To check for updates, compare the current
software version of this DVD player with the
latest software version (if available) at the
Philips website.
Caution
Power supply must not be interrupted du ring •
software upgrade.
1 Press Z to open the disc compartment.
2 Press numeric button ‘55’.
3 Write down the fi le name.
4 Go to www.philips.com/support to check
the upgrade instruction and the latest
software version using this fi le name
available for this DVD player.
5 Refer to the upgrade instructions for more
information.
Caution
Never use solvents such as benzene, thi nner, •
cleaners av ailable commercially, or anti-s tat ic spr ays
intended for discs.
Clean discs
Wipe the disc with a micro fi bre cleaning cloth
from the center to the edge in a straight line
movement.
Note
Disconnect the power cord fo r a few seconds and •
connect again to reboot the system.
38 EN
10 Specifi cation
Note
Specifi cation and design a re sub ject to change •
without notice.
Accessories supplied
Quick Start Guide•
Remote control and batteries•
Audio/video cables•
Playback media
DVD-Video, Video CD/SVCD, Audio CD, CD-R/•
CD-RW, DVD+R/+RW, DVD-R/-RW, DivX-CD,
Picture CD, MP3-CD, WMA-CD, WMV-CD, USB
fl ash drive
USB
Compatibility: Hi-Speed USB (2.0)•
Class support: UMS (USB Mass Storage Class)•
TV standard
Number of lines: •
625 (PAL/50Hz); 525 (NTSC/60Hz)•
Playback: Multi-standard (PAL/NTSC)•
Video performance
Video DAC: 12 bits, 108 MHz•
Y Pb Pr: 0.7 Vpp ~ 75 ohm•
Video output: 1 Vpp ~ 75 ohm•
Video format
Digital compression: •
MPEG 2: DVD/SVCD •
MPEG 1: VCD/DivX•
Horizontal resolution: •
DVD: 720/1920 pixels (50 Hz); 720/1920 pixels •
(60 Hz)
VCD: 352 pixels (50 Hz); 352 pixels (60 Hz) •
Vertical resolution: •
DVD: 576/1080 lines (50 Hz); 480/1080 lines •
(60 Hz)
VCD: 288 lines (50 Hz); 240 lines (60 Hz) •
Audio performance
DA converter: 24 bits, 192 kHz•
Frequency response: •
DVD: 4 Hz - 22 kHz (48 kHz); •
4 Hz - 44 kHz (96 kHz)
SVCD: 4 Hz - 20 kHz (44.1 kHz); •
4 Hz - 22 kHz (48 kHz)
CD/VCD: 4 Hz - 20 kHz (44.1 kHz) •
Signal-Noise (1 kHz): > 90 dB (A-weighted)•
Dynamic range (1 kHz): > 80 dB (A-weighted)•
Crosstalk (1 kHz): > 70 dB•
Distortion/noise (1 kHz): > 65 dB•
MPEG MP3: MPEG Audio L3•
Audio format
Digital: •
MPEG/AC-3/PCM: Compressed digital (16, 20, 24 •
bits fs, 44.1, 48, 96 kHz)
MP3 (ISO 9660): 96, 112, 128, 256 kbps & •
variable bit rate fs, 32, 44.1, 48 kHz
Analogue sound stereo•
Dolby surround compatible downmix from Dolby •
Digital multi-channel sound
Connections
Y Pb Pr output: Cinch 3x•
Video output: Cinch (yellow)•
Audio output (Front L+R): Cinch (white/red)•
Digital output: •
1 coaxial: IEC60958 for CDDA/LPCM; •
IEC61937 for MPEG 1/2, Dolby Digital
HDMI output•
5.1 channel analog output•
Audio Front L+R: Cinch (white/red)•
Audio Rear L+R: Cinch (white/red)•
Audio Centre Cinch (blue)•
Audio Subwoofer: Cinch (black)•
English
Speci cation
EN 39
Main unit
Dimensions (w x h x d): 360 x 37 x 209 (mm)•
Net Weight: approximately 1.3 kg•
Power
Power supply rating: 230 V; 50 Hz•
Power consumption: < 12 W•
Power consumption in standby mode: < 0.3 W•
Laser Specifi cation
Type: Semiconductor laser InGaAIP (DVD), AIGaAs •
(CD)
Wave length: 658 nm (DVD), 790 nm (CD)•
Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)•
Beam divergence: 60 degrees•
40 EN
11 Troubleshooting
Warning
Risk of electric shock . Never remove the ca sing of •
this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
DVD player, check the following points before
requesting service. If the problem remains
unsolved, register your product and get support
at www.philips.com/welcome.
If you contact philips, you will be asked for the
model and serial number of your DVD player.
The model number and serial number are on
the back or bottom of your DVD player. Write
the numbers here:
Model No. __________________________
Serial No. ___________________________
If this happens when you turn on the •
progressive scan setting or change the TV
system setting, you have to switch to its
default mode:
Press 1. Z to open the disc compartment.
Press the 2. numeric button ‘1’ (for
progressive scan) or the numeric
button ‘3’ (for TV System).
No picture on HDMI connection.
Check if the HDMI cable is faulty. Replace a •
new HDMI cable.
If this happens when you change the HDMI •
video resolution, you have to switch to its
default mode:
Press 1. Z to open the disc compartment
Press 2. numeric button ‘1’.
Sound
No sound.
Ensure that the audio cables are connected •
and the connected device is turned on to
the correct input source.
English
Tro u ble sho oti ng
Main unit
The buttons on this DVD player do not work.
Disconnect this DVD player from the •
power outlet for a few minutes, then
connect again.
Picture
No picture.
See TV manual for correct video input •
channel selection. Change the TV channel
until you see the DVD screen.
No sound on HDMI connection.
You may not hear any sound from the •
HDMI output if the connected device is
non-HDCP compliant or only DVIcompatible.
Ensure that the • [ HDMI Audio ] setting is
turned on.
No sound during DivX movies play.
The audio codec may not be supported by •
this DVD player.
EN 41
Play
DivX video fi les cannot be played.
Ensure that the DivX video fi le is complete. •
Ensure that the fi le name extension is •
correct.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is fi xed on the DVD.•
DivX subtitle are not displayed correctly.
Ensure that the subtitle fi le name is the •
same as the movie fi le name.
Select the correct character set.•
Press 1. SETUP.
Select 2. [ Preference Page ] > [ DivX
Subtitle ] in the menu.
Select the character set that supports 3.
the subtitle.
The contents of the USB fl ash drive cannot be
read.
The USB fl ash drive format is not •
compatible with this DVD player.
Drive is formatted with different fi le system •
which is not supported by this DVD player
(e.g. NTFS).
42 EN
12 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio
of TV screens. The ratio of a standard TV is 4:3,
while the ratio of a high-defi nition or wide TV is
16:9. The letter box allows you to enjoy a
picture with a wider perspective on a standard
4:3 screen.
Auto Wake up TV
When you connect the DVD player to devices
that support one-touch play, you can control
the DVD player and the devices with one
remote control. For example, when you press
Play on the DVD remote control, the TV
automatically switches to the correct channel to
show the DVD content.
D
DivX®
The DivX code is a patent-pending, MPEG-4
based video compression technology,
developed by DivX Networks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining
high visual quality.
H
HDMI
High-Defi nition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high defi nition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
J
JPEG
A very common digital still picture format. A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite
of its high compression ratio. Files are
recognised by their fi le extension ‘JPG or JPEG’.
M
MP3
A fi le format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer3. By using the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD. Files are recognised by their
fi le extension ‘.MP3’.
English
Glossary
EN 43
P
PBC
Playback Control. A system of navigating a
Video CD/Super VCD through on-screen
menus recorded onto the disc. You can enjoy
interactive play and searching.
Progressive Scan
The progressive scan displays twice the number
of frames per second than ordinary TV system.
It offers higher picture resolution and quality.
S
System standby
When you connect the DVD player to devices
that support standby, you can use DVD player
remote control to put the DVD player and all
connected HDMI devices in standby mode. You
can perform one-touch standby using the
remote control from any of the connected
HDMI devices.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player
version 9 or Windows Media Player for
Windows XP. Files are recognised by their fi le
extension ‘WMA’.
WMV
A video fi le or stream in Windows Media
format. It is a compression format of motion
picture based on MPEG-4 developed by
Microsoft.
44 EN
ГАРАНТИЙНЫЙ ТАЛОН
БЫТОВАЯ ЭЛЕКТРОНИКА
Изделие получил в исправном состоянии.
(подпись покупателя)
С условиями гарантии ознакомлен и согласен
Модель:
номер:
Серийный
Дата продажи:
ПРОДАВЕЦ:
Название фирмы:
Теле фон фи рмы:
Адрес и E-mail:
ПЕЧАТЬ
ФИРМЫ - ПРОДАВЦА
Внимание! Гарантийный талон недействителен без печати продавца.
45
, рекомендуем
в течение всего срока службы следите за сохранностью
,
год
1 год
1
Пульт дистанционного управления
1 год
3 года
Изделие
по
рекомендаций
(данный
получения
документы).
и
при его продаже
иные
работ
) и
товару
к
носителе
профилактических
прилагаемые
,
Информационном Центре
в
получить
можете
, телекоммуникационных и кабельных сетей;
Вы
Уважаемый потребитель!
При покупке убедительно просим Вас проверить правильность заполнения гарантийного талона. При этом серийный номер и наименование модели
Компания изготовитель выражает благодарность за Ваш выбор и гарантирует высокое качество и безупречное функционирование данного изделия при
соблюдении правил его эксплуатации.
приобретенного Вами изделия должны быть идентичны записи в гарантийном талоне. Не допускается внесения в талон каких-либо изменений,
исправлений. В случае неправильного или неполного заполнения гарантийного талона немедленно обратитесь к продавцу.
При бережном и внимательном отношении изделие будет надежно служить Вам долгие годы. В ходе эксплуатации не допускайте механических
повреждений, попадания вовнутрь посторонних предметов, жидкостей, насекомых
проведения
документы
по эксплуатации (на любом
центр для
)
что параметры работы отличаются от изложенных в инструкции пользователя
гарантии
Условия
идентификационной наклейки с обозначением наименования модели и серийного номера изделия.
Если в процессе эксплуатации изделия Вы сочтете,
обратиться за консультацией в наш Информационный центр.
потребителю)
товара
дня передачи
службы (исчисляется со
Срок
Объект
потребителю
(исчисляется со дня передачи товара
гарантии
Срок
службы
срока
сервисный
течение
накладные, инструкцию
,
сохраняйте в
чеки
кассовый
изделия.
недоразумений,
товарный и
,
возможных
срока службы обратитесь в авторизованный
окончании
избежание
По
Гарантийное обслуживание не распространяется на изделия, недостатки которых возникли вследствие:
гарантийный талон
Во
дальнейшей эксплуатации
хранения или транспортировки товара
1. Нарушения Потребителем правил эксплуатации,
Действий третьих лиц:
2.
ехнических изменений и изменений программного обеспечения
• ремонта неуполномоченными лицами;
• внесения несанкционированных изготовителем конструктивных или схемот
и норм питающих
)
;
неправильной установки и подключения изделия
•
• отклонение от Государственных Технических Стандартов (ГОСТов
сервисном обслуживании
о
звонок по России).
центров и
молния и т.п.);
,
пожар
,
Действия непреодолимой силы (стихия
3.
бесплатный
расположении сервисных
: (495) 961-1111, 8 800 200-0880 (
Любую информацию о
Телефон
Интернет: www.philips.ru
46
Language Code
Abkhazian 6566
Afar 6565
Afrikaans 6570
Amharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Avestan 6569
Aymara 6589
Azerhaijani 6590
Bahasa Melayu 7783
Bashkir 6665
Belarusian 6669
Bengali 6678
Bihari 6672
Bislama 6673
Bokmål, Norwegian 7866
Bosanski 6683
Brezhoneg 6682
Bulgarian 6671
Burmese 7789
Castellano, Español 6983
Catalán 6765
Chamorro 6772
Chechen 6769
Chewa; Chichewa; Nyanja 7889
9072
中文
Chuang; Zhuang 9065
Church Slavic; Slavonic 6785
Chuvash 6786
Corsican 6779
Česky 6783
Dansk 6865
Deutsch 6869
Dzongkha 6890
English 6978
Esperanto 6979
Estonian 6984
Euskara 6985
6976
Faroese 7079
Français 7082
Frysk 7089
Fijian 7074
Gaelic; Scottish Gaelic 7168
Gallegan 7176
Georgian 7565
Gikuyu; Kikuyu 7573
Guarani 7178
Gujarati 7185
Hausa 7265
Herero 7290
Hindi 7273
Hiri Motu 7279
Hrwatski 6779
Ido 7379
Interlingua (International)7365
Interlingue 7365
Inuktitut 7385
Inupiaq 7375
Irish 7165
Íslenska 7383
Italiano 7384
Ivrit 7269
Japanese 7465
Javanese 7486
Kalaallisut 7576
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kernewek 7587
Khmer 7577
Kinyarwanda 8287
Kirghiz 7589
Komi 7586
Korean 7579
Kuanyama; Kwanyama 7574
Kurdish 7585
Lao 7679
Latina 7665
Latvian 7686
Letzeburgesch; 7666
Limburgan; Limburger 7673
Lingala 7678
Lithuanian 7684
Luxembourgish; 7666
Macedonian 7775
Malagasy 7771
Magyar 7285
Malayalam 7776
Maltese 7784
Manx 7186
Maori 7773
Marathi 7782
Marshallese 7772
Moldavian 7779
Mongolian 7778
Nauru 7865
Navaho; Navajo 7886
Ndebele, North 7868
Ndebele, South 7882
Ndonga 7871
Nederlands 7876
Nepali 7869
Norsk 7879
Northern Sami 8369
North Ndebele 7868
Norwegian Nynorsk; 7878
Occitan; Provencal 7967
Old Bulgarian; Old Slavonic 6785
Oriya 7982
Oromo 7977
Ossetian; Ossetic 7983
Pali 8073
Panjabi 8065
Persian 7065
Polski 8076
Português 8084
Pushto 8083
Russian 8285
Quechua 8185
Raeto-Romance 8277
Romanian 8279
Rundi 8278
Samoan 8377
Sango 8371
Sanskrit 8365
Sardinian 8367
Serbian 8382
Shona 8378
Shqip 8381
Sindhi 8368
Sinhalese 8373
Slovensky 8373
Slovenian 8376
Somali 8379
Sotho; Southern 8384
South Ndebele 7882
Sundanese 8385
Suomi 7073
Swahili 8387
Swati 8383
Svenska 8386
Tagalog 8476
Tahitian 8489
Tajik 8471
Tamil 8465
Tatar 8484
Telugu 8469
Thai 8472
Tibetan 6679
Tigrinya 8473
Tonga (Tonga Islands) 8479
Tsonga 8483
Tswana 8478
Türkçe 8482
Turkmen 8475
Twi 8487
Uighur 8571
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapuk 8679
Walloon 8765
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 8973
Yoruba 8979
Zulu 9085
47
© 2009 Koninklijke Philips Electronics N.V.
All right reserved
sgptt_0913/51-2
Loading...