Philips DVP5160-05 User Manual

DVP 5160

DVD Video Player

Quick Start Guide

What’s in the box?

DVD Video Player

Remote Control

and 2 AAA batteries

User Manual

Quick Start Guide

Connect

A Use the SCART cable (not supplied) to connect the

SCART socket (TV OUT) on the rear panel of the DVD player and the SCART input socket at the rear of the TV.

B Plug in the power cable from the DVD player to an

AC power outlet.

Note See the accompanying user manual for other possible connections (e.g. Component Video).

Basic Connection

SCART connection to TV

To SCART In socket on the TV

Television (rear)

From TV Out socket on the DVD Player

DVD Player (rear)

SCART IN

VIDEO OUT

COMPONENT VIDEO OUT

SCART IN

DIGITAL

OUT

AUDIO OUT

COAXIAL

1_dvd5160_qsg_05_eng2.indd 11_dvd5160_qsg_05_eng2.indd 1 2007-04-02 10:19:11 AM2007-04-02 10:19:11 AM

Enjoy

Need help?

User Manual

For more product information refer to the user manual of the DVD player

Online

Go to www.philips.com/welcome

Set up

Start playback

A Playback may start automatically when a disc has

been loaded in the disc tray.

Note If a disc menu appears on the TV:

1) Press S T W X to scroll through the options

available in the DVD menu.

2) Press PLAY/PAUSE u on the option you want to start playback

B Press PLAY/PAUSE

start playback.

C To stop playback, press

STOP Ç.

D Press DISC MENU to go

back to the disc menu anytime.

Troubleshooting

For more troubleshooting tips, see the user manual.

No power

• Check if the AC power cord is properly connected.

• Press the STANDBY-ON on the front of the DVD player to turn on the power.

No picture

• Check connection to TV and ensure the plugs are  rmly in place.

No sound or distorted sound

• Adjust the volume

• Check audio connections are in the correct input source.

Remote control does not work

• Check the batteries are loaded correctly or replace the batteries with new ones.

• Reduce the distance between the remote control and the DVD player.

• Point the remote control directly toward the IR sensor.

SL/0711/05_1_RC2

Finding the viewing channel

A Press 2 on the DVD player’s remote control.

B Switch on the TV.

• The DVD background appears on the TV screen.

C Press ‘0’ on the TV’s remote control, then repeatedly

press the Channel Down button until you see the DVD background screen. This is the correct viewing channel for the DVD player.

Note For some TVs, to  nd the correct viewing channel, you can keep pressing the AV or SELECT buttons, If still unable to  nd the correct viewing channel, check the connections again or check your TV’s user manual.

Language preference setup

Use the DVD player’s remote control

to select the desired On-screen language, Audio language, Subtitle language and Menu language

you preferred.

Selecting On-screen language

Press SETUP on the DVD player’s remote control.

B Press

to highlight {OSD Language}, then press X.

Disc Lock

OSD Language English

Sleep

DivX(r) VOD Code

General Setup Page

C Press S

to select a language and press OK.

Note The On-screen language for the setup menu will

remain once you set it, regardless of various disc languages.

1_dvd5160_qsg_05_eng2.indd 21_dvd5160_qsg_05_eng2.indd 2 2007-04-02 10:19:13 AM2007-04-02 10:19:13 AM