Philips DVP5140-37 User Manual
DVP 5140
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User Manual
Quick Start Guide
VIDEO IN
(CVBS)
VIDEO OUT
(CVBS)
1
Connect
A Use the supplied composite video cable (yellow plug)
to connect the DVD player’s Video Out (CVBS)
socket to the Video In socket (or labeled as A/V In,
Video In, Composite or Baseband) on the TV.
B To hear the sound of this DVD player from the TV,
use the supplied audio cables (red and white plugs)
to connect {AUDIO OUT L/R} sockets of the DVD
player to the corresponding Audio In sockets on the
TV.
C Plug in the power cable from the DVD player to an
AC power outlet.
Note See the accompanying user manual for other
possible connections (e.g. Component Video).
Basic Connection
A
Audio/Video connection to TV
Video cable
(yellow plug)
Audio cables
(red & white plugs)
To Video In
socket on the TV
To Audio In
socket on the TV
From Video Out
socket on the
DVD Player
From Audio Out
sockets on the
DVD player
VIDEO IN
(CVBS)
1_dvd5140_qsg_37_eng1.indd 11_dvd5140_qsg_37_eng1.indd 1 2005-11-16 4:51:20 PM2005-11-16 4:51:20 PM
3
Enjoy
Need help?
User Manual
See the user manual that cames with your Philips DVD Player
Online
Go to www.usasupport.philips.com
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
2
Set up
A
Finding the viewing channel
A Press 2 on the DVD player’s remote control.
B Switch on the TV.
C Press SETUP on the DVD player’s remote control.
Go to General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Sleep
DIVX(R) Vod Code
- - General Setup Page - -
D Press ‘0’ on the TV’s remote control, then repeatedly
press the Channel Down button until you see the
DVD background screen. This is the correct viewing
channel for the DVD player.
Note For some TVs, to nd the correct viewing
channel, you can keep pressing the AV or SELECT
buttons, If still unable to nd the correct viewing
channel, check the connections again or check your
TV’s user manual.
B
Language preference setup
Use the DVD player’s remote control
to select the
desired On-screen language, Audio language, Subtitle
language and Menu language
you preferred.
Selecting On-screen language
A
Press X to select {General Setup Page}.
B Press S
T
to highlight {OSD Language}, then press X.
Set OSD Language English
Disc Lock
Display Dim
Program
OSD Language ENGLISH
Sleep FRANÇAIS
DIVX(R) Vod Code DEUTSCH
NEDERLANDS
- - General Setup Page - -
C Press S
T
to select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc
languages.
A
Start playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1) Press S T W X to scroll through the options
available in the DVD menu.
2) Press PLAY XÅ on the option you want to
start playback
B Press PLAY
XÅ
to start
playback.
C To stop playback, press
STOP Ç.
D Press DISC MENU to go
back to the disc menu
anytime.
Troubleshooting
For more troubleshooting tips, see the user
manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the front of the DVD
player to turn on the power.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Adjust the volume
• Check audio connections are in the correct input
source.
Remote control does not work
• Check the batteries are loaded correctly or replace the
batteries with new ones.
• Reduce the distance between the remote control and
the DVD player.
• Point the remote control directly toward the IR
sensor.
2005 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp
P.O. Box 671539
Marietta, GA 30006-0026
Printed in China
SL/0546/37_03
1_dvd5140_qsg_37_eng1.indd 21_dvd5140_qsg_37_eng1.indd 2 2005-11-16 4:51:30 PM2005-11-16 4:51:30 PM
Loading...