Philips DVP3588 94 User Manual

Register your product and get support at
www.philips.com/welcome
DVP3588
EN User manual
Contents
Safety and important notice 4 Trademark notice 4
Playable media 5 Product overview 5
Connect audio/video cables 7 Optional audio connections 7 Connect USB fl ash drive 8 Connect power 8
Prepare the remote control 8 Find the TV input channel 9 Select menu display language 9 Turn on progressive scan 9 Use Philips EasyLink 10
5 Play 10
Play a disc 10 Play video 10 Play music 12 Play photo 12 Play from a USB fl ash drive 13
6 Other features 13
Media copy 13 Create MP3 fi les 14
English
7 Adjust settings 14
General setup 14 Audio setup 15 Video setup 16 Preferences 17
8 Additional information 19
Update software 19 Care 19 Specifi cations 19
9 Troubleshooting 19
10 Glossary 20
EN
3
1 Important
Safety and important notice
Warning
Risk of overh eating! Never install t he product i n a confi ned space. Alw ays leave a space of a t leas t 4 inch es around the pr oduc t for ventila tion. Ensur e cur tains or other objec ts never cover t he ventilat ion slo ts on th e product. Never p lace the product, remote contr ol or batter ies
near na ked fl ames or ot her he at sour ces, i nclud ing dir ect sunlight. Avoid high temp era ture , mois ture , wate r and dust.
This unit mus t not be e xpose d to dripping or spla shing. Never p lace any o bjec t or ite ms that can damage this unit (e. g., li quid fi lled ob ject s, lighted c andles). Never p lace this prod uct on other e lectric al equipment.
Keep away from t his produc t during ligh tning stor ms. Wher e the ma ins plug or an appliance coupler is use d as the dis conne ct dev ice, the disco nnec t devi ce shall remain readily operable. Visib le and invisible las er radiati on when open. Avoid
expos ure to b eam.
negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area.
Copyright notice
This item incorporates copy protection technology that is protected by U. S. patents and other intellectual proper ty rights of Rovi Corporation. Reverse engineer ing and disassembly are prohibited.
CLASS 1
LASER PRODUCT
About Progressive Scan
Consumers should note that not all high defi nition television sets are fully compatible with this product and may cause ar tifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard defi nition’ output. If there are questions regarding our T V set compatibility with this model 525p and 625p DVD player, please contact our customer service center.
Disposal of your old product and batteries
Your produc t is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local r ules on the separate collec tion of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Your produc t contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separ ate collection of bat teries. The correct disposal of batteries helps prevent potentially
Trademark notice
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsof t Corporation in the United States and/or other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are regis tered trademarks & DTS Digital Surround and the DTS logos are tr ademark s of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
4
EN
digit al video format created by DivX, Inc. This is an offi cial DivX Certifi ed device that plays DivX video. Visit www.divx.com for more information and soft ware tools to conver t your fi les into DivX video. ABOUT DIVX VIDEO-ON- DEMAND: This DivX Certifi ed play DivX Video-on-Demand (VOD) content. To gener ate the registration code, locate the DivX VOD section in the device setup menu. Go to vod. divx.com with this code to complete the registration process and learn more about DivX VOD. DivX® and DivX Ultra® are registered trademarks of DivX, Inc., and are used under license.
Universal Serial Bus Implementers Forum, Inc.
High-Defi nition Multimedia Inter face are trademar ks or registered trademarks of HDMI licensing LLC.
ABOUT DIVX VIDEO: DivX® is a
®
device must be registered in order to
The USB-IF Logos are trademarks of
HDMI, and HDMI logo and
2 Your DVD player
Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/ welcome.
Playable media
This product can play:
DVD, DVD -Video, DVD+R/+RW, • DVD- R/-RW, DVD+R/-R DL (Dual Layer) Video CD/SVCD• Audio CD, CD-R/CD-RW, • MP3 media, WMA media, WMV media , • DivX (Ultra) media, JPEG fi les USB fl ash drive
Region codes
You can play discs with the following region codes.
DVD region code Countries
India
Product overview
Main Unit
English
a b cdef
a (Standby-On)
b Disc compartment c Display panel d
e
f
Turn on the unit or switch to standby.
(Open/Close)
Open or close the disc compartment.
(Play/Pause)
Star t, pause or resume disc play.
(USB) jack
Connect a USB fl ash drive.
EN
5
Remote control
n
o
m
l
k
p
r
q
a
b
c
d
e
f
g
h
i
j
a
b
c DISC MENU
6
Turn on the unit or switch to standby.
Open or close the disc compartment.
Access or exit the disc menu. • Switch to the disc mode.
EN
During a photo slideshow, switch • between Fun Mode (color) and Simple Mode (black and white). For VCD and SVCD, tur n on or off PBC • (playback control).
d
e
f
g
h Numeric buttons
i SUBTITLE
j
k VOLUME
l REPEAT /REPEAT A-B
m AUDIO/CREATE MP3
n
o
p
q OK
r SETUP
Navigate the menus.• Search fast-forward ( • Search slow-forward ( ) or slow­backward ( ).
BACK
Retur n to the previous display menu.
/
Skip to the previous or next title, chapter, • or track.
Switch to the USB mode.
Selec t an item to play.
Select a subtitle language on a disc.• Access the menu of copying/deleting USB • audio fi les.
ZOOM
Fit the piture display to the T V screen.• Zoom the picture in or out.
Display the cur rent volume level and use • (
) or ( ) navigation buttons to set the
volume level between 0 ~ 20.
Selec t or turn off repeat mode.• Repeat play for a specifi c sec tion.
Select an audio language or channel on • a disc. Access the menu of creating MP3 fi les.
Stop play.
Star t, pause or resume disc play.
INFO
For discs, access the play options or • display the current disc status. For slideshows, display a thumbnail view • of photo fi les.
Confi rm an entr y or selection.
Access or exit the setup menu.
) or fas t-backward ( ).
3 Connect
Make the following connections to use this product.
Basic connections:
Video• Audio
Optional connections:
Route audio to other devices:
Digital amplifi er/receiver• Analogue stereo system
USB fl ash drive
Connect audio/video cables
Select the best video connection that TV can support.
Option 1: Connect to the HDMI jack (for a HDMI, DVI or HDCP-compliant TV ).
Option 2: Connect to the component video jacks (for a standard TV or Progressive Scan TV).
Option 3: Connect to the composite video jack (for a standard TV).
Option 1: Connect to the HDMI jack
HDMI IN
HDMI OUT
Option 2: Connect to the component video jacks
Y
Pb
Pr
Pb
Pr
Y
COMPONENT VIDEO OUT
Connect the component video cables (not
1
supplied) to:
the Y Pb Pr jack s on this product. the COMPONENT VIDEO input jacks • on the T V.
2 Connect the audio cables (supplied) to:
the AUDIO OUT FRONT L /R jacks on this product. the audio input jacks on the T V.
Option 3: Connect to the video (CVBS) jack
English
Connect an HDMI cable (supplied) to
1
the HDMI OUT jack on this produc t. the HDMI input jack on the TV.
Note
If the device su ppor ts HDMI CEC, you c an cont rol compliant devices with a single re mote control (see “Get sta rted” > “U se Philips Ea syLi nk”).
Connect a composite video cable (supplied)
1
to:
the TV OUT jack on this product. the video input jack on the TV.
2 Connect the audio cables (supplied) to:
the AUDIO OUT FRONT L /R jacks on this product. the audio input jacks on the T V.
Optional audio connections
Connect the audio from this product to other devices to enhance sound.
EN
7
Connect multi channel receiver
FRONT L
REAR L
CENTER
1 Connect the audio cables (supplied) to:
the AUDIO OUT FRONT L /R jacks on this product. the audio input jacks on the T V.
Connect USB fl ash drive
1 Connect a USB fl ash drive to the jack on
this product.
REAR R
FRONT R
SUBWOOFER
MULTICHANNEL
AUDIO IN
1
Connect the audio cables (not supplied) to:
the AUDIO OUT ( FRONT L/R, REAR L/R, CENTER and SUBWOOFER) jacks on this product. the audio input jacks on the device.
Connect to digital amplifi er/receiver
DIGITAL IN
DIGITAL
OUT
COAXIAL
Connect a coaxial cable (not supplied) to:
1
the COAXIAL jack on this product. the COAXIAL /DIGITAL input jack on • the device.
Connect analogue stereo system
AUDIO IN
FRONT L
FRONT R
Note
This produc t can only play/view M P3, WMA, W MV, DivX (Ultra) or JPEG fi les th at are s tored on a USB fl ash drive. Press the
but ton to access the conten t and play
the fi les.
Connect power
Caution
Risk of produ ct damage! E nsur e that the power s upply voltage cor resp onds to t he voltage pr inte d on the back of the pr oduc t. Befor e connecti ng the AC power cord, ensure you have
completed all other connec tions.
Note
The type pla te is loc ated on t he back of the produc t.
1 Connect the AC power cable to the wall
socket.
The product is ready to be set up for use.»
4 Get started
Prepare the remote control
1 Press and push the battery compar tment to
slide it open (see “1” in the illustration).
2 Insert two A AA batteries with correct
polarity (+/-) as indicated.
8
EN
3 Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you ar e not goi ng to use t he rem ote cont rol for a long time , remove the batter ies .
Do not mi x batt eries (old and new or car bon and alka line, etc.).
Bat teri es cont ain chemica l subs tances, so t hey should be disposed of pr oper ly.
Turn on progressive scan
Note
To use the progres sive scan feature , you mus t conne ct a progress ive scan TV w ith the component video jacks (see “Conn ect ” > “Connect a udio/ video cables” > “Opt ion 2: Conne ct to the component v ideo jacks” for details).
English
Find the TV input channel
1 Press to turn on this product. 2 Turn on the TV and switch to the video input
channel (refer to the TV user manual on how to select the A/V input channel).
Select menu display language
Note
If this p rodu ct is connec ted to a HDMI CEC compli ant TV, skip this setting. It s witches au tomat ically to the same OSD menu l anguage as pe r your T V set ting (if the langu age set o n TV is s uppor ted by this produc t).
1 Press SETUP.
» [General Setup] menu is displayed.
2 Select [OSD L anguage], and then press . 3 Press to selec t a language, and then press
OK.
1 Turn on the TV to the correct viewing channel
for this product.
2 Press SETUP. 3 Press to select [Video Setup]. 4 Select [Progressive] > [On], and then press
OK.
A warning message is displayed.»
5 To proceed, select [Ok] and then press OK.
The progressive setup is complete.»
Note
If a blan k/distor ted screen is displayed, w ait for 15 seconds for the auto recover y. If no pic tur e is disp layed, turn off the p rogr essive scan
mode as follows:
1) Press
to open t he disc compar tment.
2) Press t he Numeric button ‘1’.
6 Press SETUP to exit the menu. 7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
Duri ng play, wh en the p rogr essive scan mode is on for both th is product a nd the T V, distor ted pic ture may displ ay. In this c ase, turn off the p rogr essive scan featur e on both t his produc t and th e TV.
EN
9
Use Philips EasyLink
This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.
Note
To enable the Eas yLin k featu re, you must turn on t he HDMI CEC ope rations on t he TV a nd on oth er dev ices connected to TV. Refer to the T Vs/devices man ual for details.
One-touch play 1
Press to turn on this product.
The TV (if supports one-touch play) » automatically turns on and switches to the correct video-in channel.
If a disc is loaded in this product, disc play » automatically starts.
One-touch standby 1
Press and hold on the remote control for
more than 3 seconds.
All the connected devices (if the device » supports one-touch standby) automatically switch to standby.
Note
Phili ps does n ot guarantee 100 % inter oper ability w ith all HDMI CEC dev ices.
5 Play
Play a disc
Caution
Do not place any object s othe r than discs in to the di sc compar tment. Do not touch the d isc opt ical lens inside the d isc
compar tment.
1 Press to open the disc compartment. 2 Insert a disc with its label facing up. 3 Press to close the disc compartment and
start disc play.
Note
Check t he ty pes of discs sup por ted (see “ Your DVD player ” > “Playabl e media”).
If the pa sswo rd ent ry menu is displaye d, enter the pass word before you can play the loc ked or re str icted disc (see “Adjust settings” > “Prefe rences” > [Parental
Control]).
Play video
Note
Some opera tions m ay not wor k wit h some discs. See the infor mation accompanying the disc for details.
Control video play 1
Play a title.
2 Use the remote control to control the play.
Button Action
Star t, pause or resume disc play.
Stop disc play.
,
,
,
AUDIO/ CREATE MP3
SUBTITLE Select a subtitle language
REPEAT/ REPEAT A-B
ZOOM
(Screen fi t)
ZOOM
INFO
Skip to a previous/next title or chapter.
Search fast-back ward or fast­forward. Press repeatedly to change the search speed.
Search slow-forward or slow­backward. Press repeatedly to change the search speed. For VCD/SVCD, slow-back ward search is not available.
Select an audio language or channel available on a disc.
available on a disc. Selec t or turn off repeat mode.
Repeat play for a specifi c sec tion. Fit the picture for mat to the TV
screen. Press repeatedly until the image is scaled to fi t to the TV screen.
Toggle between screen aspect ratio and dif ferent zoom factor. To pan through the zoomed image, press the Navigation buttons.
Access the play options and display the current disc status.
10
EN
Access DVD menu 1
Press DISC MENU to access the disc root
menu.
2 Select a play option, then press OK.
In some menus, press the Numeric
buttons to input your selection.
Access VCD menu
The PBC (playback control) feature is available for VCD/SVCD, which can display the contents menu for you to select a play option. The PBC is on by default in the factory.
Note
See “Adju st set tings” > “Preferences” > [PBC] on how to tur n PBC on or off.
1 Display the contents menu via one of the
following ways:
If PBC is on, load in a VCD/SVCD.• During play with PBC on, press
BACK.
2 Press the Numeric buttons to selec t a play
option, and then press OK to star t play.
If PBC is turned off, it skips the menu • display and star ts play from the fi rst track.
Preview disc contents 1
During play, press INFO.
The disc status menu is displayed.»
2 Select [Preview], and then press . 3 Select a preview option, and then press OK.
A thumbnails preview screen is displayed.»
To go to the next/previous preview • screen, select [Prev] or [Next], and then press OK. To star t play, press OK at the selected thumbnail picture.
Skip play to a specifi c time 1
During play, press INFO.
The disc status menu is displayed.»
2 Select an option for the current elapsed
playing time, and then press .
[TT Time] (title time)
[CH Time] (chapter time)
[Disc Time]
[Track Time]
3 Press the Numeric buttons to enter the time
to skip to, then press OK.
Display play time 1
During play, press INFO.
The disc status menu is displayed.»
2 Select [Time Disp.], and then press .
The display options vary from disc type.»
3 Select an option, and then press OK.
View DVD play from different angles 1
During play, press INFO.
The disc status menu is displayed.»
2 Select [Angle], and then press . 3 Press the Numeric buttons to change the
angle.
Play changes to the selected angle.»
Note
Applicabl e only to d iscs that cont ain mu lti- angle scenes .
Repeat play for a specifi c section 1
During play, press REPEAT/REPEAT A-B at
the star t point.
2 Press REPEAT/REPEAT A-B again to set the
end point.
Repeat play starts.»
3 To cancel repeat play, press REPEAT/REPEAT A-B
again.
Note
The marked secti on for re peat p lay is onl y possi ble within a track/title.
Play DivX® (Ultra) video
DivX® (Ultra) video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX® (Ultra) video on this DivX (Ultra) certifi ed product.
1 Insert a disc or USB fl ash drive that contains
the DivX (Ultr a) videos.
For USB , press .
A contents menu is displayed.»
2 Select a title to play, then press OK.
You may select subtitle/audio language.
English
EN
11
Note
You can only play DivX ( Ultr a) video that is rented or purchase d with t he DivX r egis tration cod e of this product (see “Adjust S ettings” > “General setup” >
[DivX(R) VO D Code]).
Play music
Control a track 1
Play a track .
2 Use the remote control to control the play.
Button Action
Star t, pause or resume disc play.
Stop disc play.
,
Skip to a previous/next track .
Selec t an item to play.
Play MP3/WMA music
MP3/WMA is a t ype of highly compressed audio fi le (fi les with .mp3, .wma extensions).
1 Insert a disc or USB fl ash drive that contains
the MP3/WMA music.
For USB , press .
A contents menu is displayed.»
2 If play does not automatically star t, select a
track to play.
To select another track/folder, press , then press OK.
Note
For disc recor ded in m ultiple ses sions , only t he fi r st session is played. For a WMA fi le that is protect ed by Dig ital Rights
Manag emen t (DRM), it ca nnot be played on this pr oduc t. This produc t does not suppor t MP3PRO audio format.
For any special characte r that is p rese nt in the MP3 tr ack name (ID3) or albu m name , it mig ht not be d isplayed corr ectly on the s cree n because the se char acters a re not supported. Folders/fi les that exceed the supported limit of this
product ca nnot be displayed or played.
,
REPEAT/ REPEAT A-B
Searches fast-backward or fast-forward. Press repeatedly to change the search speed.
Select or turn off repeat mode. Repeat options may var y from disc type.
Quick skip play 1
During play, press INFO repeatedly to
select an option.
Display Action
[Disc Go To] Skip play to a specifi c time
[Track Go To] Skip play to a specifi c time
[Select Track] Skip play to a specifi c track
within the disc.
within a track.
number.
2 Press the numeric but tons to change the time/
number to skip to.
12
EN
Play photo
Play photo as slideshow
You can play JPEG photos (fi les with .jpeg or .jpg extensions).
1 Insert a disc or USB fl ash drive that contains
the JPEG photos.
For USB , press .
Slideshow begins (for Kodak disc), or a » contents menu (for JPEG disc) is displayed.
2 Select a photo, and then press OK to start
slideshow.
For a photo recorded with the “exif ” » format, the display orientation is automatically optimized.
To display photos in color (fun mode) or in • black and white (simple mode), press DISC MENU. To preview the photos in thumbnail, press
INFO.
To select a photo, press the Navigation buttons. To enlarge the selected photo and start • slideshow, press OK. To return to the menu, press BACK.
Note
It may requir e longe r time to displ ay the disc conte nt on the T V due to t he lar ge num ber of so ngs/photos compiled onto one dis c/U SB fl ash dri ve. If the J PEG pho to is not r ecord ed wit h an ‘exif ’ type
fi le, the ac tual thumbn ail pic tur e cannot be show n on the scr een. It is re placed by a ‘blu e mount ain’ thumbn ail picture. This produc t can only dis play digita l came ra pic tur es
accord ing to the JPEG -E XIF format, ty pically used by almos t all di gita l came ras . It ca nnot di splay Motion J PEG, or pic ture s in formats ot her th an JPE G, or sound cli ps associated w ith pictures. Folders/fi les that exceed the supported limit of this
product ca nnot be displayed or played.
Control photo play 1
Play a photo slideshow.
2 Use the remote control to control the play.
Button Action
/
Rotate a photo anti-clockwise/ clockwise.
/
Rotate a photo horizontally/ vertically.
ZOOM
Zoom in or out of a photo. Play pauses in zoom mode.
Stop a play.
Play musical slideshow
Create a musical slideshow to play MP3/WMA music fi les and JPEG photo fi les simultaneously.
Note
To create a mu sical slide show, you m ust s tore the MP3/ WMA an d JPEG fi les on t he sam e disc /USB fl ash d rive .
1 Play MP3/WMA music. 2 Press BACK to return to the main menu. 3 Navigate to the photo folder/album and press
OK to start slideshow play.
Slideshow begins and continues till the end » of the photo folder or album.
Audio continues to play until the end of » the disc.
To stop slideshow play, press • To stop music play, press
.
again.
Play from a USB fl ash drive
Note
This produc t plays/views MP3 , WMA , WMV, Di vX (Ultra) or J PEG fi les that a re st ored on a USB fl ash dr ive.
1 Connect a USB fl ash drive to the jack on
this product.
2 Press the button.
A contents menu is displayed.»
3 If play does not s tart automatically, selec t a fi le
to play.
For more information, see the chapters • “Play music”, “Play photo” and “Play video” for details.
4 To stop play, press .
To switch to the disc mode, press the
button.
6 Other features
Media copy
You can copy fi les (such as MP3, WMA or JPEG) from disc to a USB fl ash drive.
1 Insert a disc that contains the MP3/WMA /
JPEG fi les.
2 In the stop mode, connect the USB fl ash drive
to the jack on this product.
3 Select a fi le to copy, then press SUBTITLE. 4 Select [Yes] in the menu, then press OK.
00:00/00:00 005/030
\MP3
Previous
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Once complete, a new folder is created » automatically in the USB fl ash drive to store all the new fi les.
5 To stop copy progress, press , then press
OK.
Do you want to copy this file
Yes No
English
EN
13
Note
When you copy, neve r pres s any button . Copy- prote cted media cannot b e copied.
Create MP3 fi les
With this product, you can convert audio CDs into MP3 audio fi les. The created MP3 audio fi les are saved in the USB fl ash drive.
1 Insert an audio CD. 2 Connect a USB fl ash drive to the jack on
this product.
3 During disc play, press AUDIO/CREATE MP3.
The MP3 creation menu is displayed.»
4 Select [Yes] in the menu, and then press OK.
8 Select [Start] in the menu, and then press OK
to star t to convert.
Once complete, a new folder is created » automatically in the USB fl ash drive to store all the new MP3 fi les.
To exit the menu, select [Exit], and then press OK.
Note
When you convert , never p ress a ny but ton. DTS CDs an d copy-protected C Ds cannot be conver ted. Writer-p rotected or pass word-protected USB fl ash driv es cannot be used to store MP3 fi les .
7 Adjust settings
Create MP3
OPTIONS
Speed Normal
Bitrate 128kbps
CRT ID3 Yes
Device USB 1
SUMMARY
Press [OK] button to change speed.
Start Exit
TRACK
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Select all
Deselect all
5 Select a conversion option in the [OPTIONS]
panel, and then press OK repeatedly to select an item.
Option Description
[Speed] Selec t a copying speed. [Bitrate] Select a qualit y level.
[CRT ID3] Copy track information into the
[Device] The created fi les can only be saved
Higher bitr ate for better sound quality and bigger fi le size.
MP3 fi le.
in a USB fl ash drive.
6 Press to access the [TRACK] panel. 7 Select an audio track , and then press OK.
To select another track, repeat step 7.• To select all tracks, selec t [Select all] in the menu, and press OK. To deselect all tracks, select [Deselect
all] in the menu, and press OK.
Note
If the setup option is g rayed o ut, i t means the set ting cannot be changed at the current s tate .
General setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to enter the submenu. 3 Select an option, and then press OK. 4 Select a setting, and then press OK.
[Disc Lock]
Set the play res triction for a disc which is loaded in the disc compar tment (maximum 20 discs can be locked).
[Lock] - Restrict the access to the current
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
disc. At the nex t time when you want to play this disc or unlock it, you need to enter the password.
14
EN
[Unlock] - Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
[Off ] - Disable sleep mode.
[15 Mins], [30 Mins], [45 Mins], [60 Mins] ­Selec t the countdown time for this product to switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).
[Off ] - Disable the auto standby mode.
[DivX(R) VOD Code]
Display the DivX® regis tration code and deregistration code.
[Registration] - Obtain a registration code to regis ter this product on website.
[Deregistration] - Obtain a deregistr ation code to cancel the registration of this product on website.
Note
Use thi s product’s DivX reg istrati on code w hen you r ent or purchase v ideo from w ww.di vx.com/ vod. The DivX videos rent ed or purchas ed thr ough the DivX (Vi deo On Demand) ser vice c an be played only on the device to which it is registered .
®
VOD
[Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
[LT/RT] - For the surround sound output through two speakers.
[Stereo] - For the stereo output.
[Multi Channel] - For multi-channel output.
[Digital Audio]
Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).
[Digital Output] - Select a type of digital output.
[All] - Support multi-channel audio
formats.
[Off ] - Disable digital output.
[PCM Only] - Downmix to two-channel
audio format .
[LPCM Output] - Selec t the LPCM (Linear Pulse Code Modulation) output sampling rate.
[48kHZ ] - For discs recorded at sampling
rate of 48 kHz.
[96kHZ] - For discs recorded at sampling
rate of 96 kHz.
Note
[LPCM Outpu t] setting is only availabl e if the [Digital Output] is set to [PCM Only].
The higher th e samp ling r ate, t he bet ter th e sound quality.
English
Audio setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Audio Setup], and then
press to enter the submenu.
3 Select an option, and then press OK. 4 Select a setting, and then press OK.
To return to the previous menu, press
BACK .
To exit the menu, press SETUP.
[HDMI Audio]
Selec t the HDMI audio set ting when you connect this product and the TV with an HDMI cable.
[On] - Allow audio ou tput through the T V and the speaker system. If the audio format on the disc is not supported, it will be downmixed to two- channel sound (linear- PCM).
[Off ] - Disable the audio output from HDMI devices connected to this player.
[Audio Sync]
Set the delay time for audio output when you play a video disc.
1. Press OK.
2. Press to set the delay time.
3. Press OK to confi rm and exit.
[Volume]
Set the default volume level when you play a disc.
15
EN
1. Press OK.
2. Press to set the volume .
3. Press OK to confi rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio output.
[3D] - Select a virtual surround sound effect that is produced from the lef t and right audio channels.
[Movie Mode] - Select a sound effect for movies.
[Music Mode] - Select a sound effect for music.
[Speaker Setup]
Optimize the surround output for the connected speakers.
[CD Upsampling ]
For bet ter sound quality in stereo mode, convert the music CD to a higher sampling rate.
[Off ] - Turn of f CD-upsampling.
[88.2kHz] - Convert to twice the original sampling rate.
[176.4kHz] - Convert to four times the original sampling rate.
[Night Mode]
Make loud sound level sof ter and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
[On] - Enjoy quiet viewing at night.
[Off ] - Enjoy surround sound with a full dynamic range.
Note
Applicabl e only to D olby Digita l encod ed DVDs .
2 Press to select [Video Setup], and then
press to enter the submenu.
3 Select an option, and then press OK. 4 Select a setting, and then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
[TV System]
Change this set ting if the video does not appear correctly. By default, this set ting matches the most common setting for TVs in your country.
[PAL] - For a PAL-system TV.
[Multi] - For TV that is compatible with both PAL and NTSC.
[NTSC] - For an NTSC-system TV.
[TV Display]
Select a display format:
[4:3 Pan Scan] - For a 4:3 screen T V: full-height display with the trimmed sides.
[4:3 Letter Box] - For a 4:3 screen TV: wide­screen display with black bars on the top and bottom of the screen.
[16:9] - For a wide-screen T V: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this product, turn on the progressive scan mode.
[On] - Turn on progressive scan.
[Off ] - Turn of f progressive scan mode.
Video setup
1 Press SETUP.
» [General Setup] menu is displayed.
16
EN
Note
For mor e detailed d escr iptio n, see “Get star ted” > “Turn on p rogr essive scan”.
[Picture Setting]
Selec t a predefi ned set of picture color settings or customize the personal setting.
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color satur ation, then press OK.
[My Wallpaper]
Select a picture as the wallpaper.
[Default picture] - The default wallpaper preset as the Philips logo.
[Saved picture] - A captured video image or JPEG photo.
[Current picture] - Capture a video image or JPEG photo and save it on the product.
1. Play a video or photo slideshow.
2. Select a video image or photo: press to pause, and then press SETUP.
3. Navigate to the option ( [Video Setup] > [My Wallpaper] > [Current picture]).
4. Press OK to confi rm.
One video image or JPEG photo is saved as » wallpaper.
A newly saved image or photo replaces the » earlier one.
[HD JPEG]
Enjoy untouched and uncompressed JPEG pictures at its original resolution when you connect this product and the TV with an HDMI cable.
[On] - Display high defi nition picture.
[Off ] - Display standard picture.
[HDMI Setup]
When you connec t this proudct and the TV with an HDMI cable, select the best HDMI setup that the TV can support.
[Resolution] - Select a video resolution that is compatible with the T V display capability.
[Auto] - Detect and select the bes t
supported video resolution automatically.
[480i],[480p], [576i], [576p],[720p],
[1080i], [1080p] - Select a video resolution that is best suppor ted by the TV. See the TV manual for details.
[Wide Screen Format] - Defi ne the wide screen format for disc play.
[Super Wide] - Center position of
the screen is stretched less than the side (applicable only when the video resolution is set to 720p, 1080i or 1080p).
[4:3 Pillar Box]
- No stretching of picture. Black bars are displayed on both sides of the screen (applicable only when the video resolution is set to 720p, 1080i or 1080p).
[Off ] - Picture is displayed according to the disc format.
[EasyLink Setup] - If this product is connected to HDMI CEC compliant T V/devices, all connec ted devices can respond to the following commands simultaneously.
[EasyLink] - Turn on/off all EasyLink
features.
[One Touch Play] - Turn on or off the feature of one-touch play.
When EasyLink is enabled, press
This product turns on.» The TV (if the TV supports one-touch »
play) automatically turns on and switches to the video-in channel.
Disc play starts if there is a disc in this » product.
[One Touch Standby] - Turn on or off the feature of one-touch standby.
When EasyLink is enabled, press and
for at least three seconds.
hold
All connected HDMI CEC compliant » devices switch to standby mode.
Note
You must tu rn on the HDM I CEC operat ions on t he TV/ devices befor e you can enjoy the Eas yLin k contr ols. S ee the T V/device s manual for details . Phili ps does n ot guarantee 100 % inter oper ability w ith all
HDMI CEC compliant device s.
Preferences
Note
Stop disc play before you c an access to [Preferences].
Preferences
Audio
Subtitle Disc Menu Parental Control
PBC Mp3/Jpeg Nav
Password DivX Subtitle
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press to select [Preferences], and then
press
to enter the submenu.
3 Select an option, and then press OK. 4 Select a setting, and then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
.
English
EN
17
[Audio]
Selec t an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
If the language you have s et is not available on the disc, the dis c uses i ts own defaul t language. For som e DVDs, t he sub titl e/aud io lang uage ca n only
change from the disc menu. To select t he languages that ar e not lis ted in the men u,
select [Others]. Then chec k the La nguage Code list at the bac k of this user manual and enter the respec tive language code.
[Parental Control]
Restrict access to discs that are unsuit able for children. These types of discs mus t be recorded with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the password.
Note
Rated DVDs above the level you se t in [Parental Control] require a pas sword to be played. The ratings are cou ntr y-de pend ent. To allow all di scs to
play, select ‘ 8’. Some discs have rati ngs pr inted o n them b ut are not
recor ded wi th ra tings. This func tion ha s no effect on such discs.
[PBC]
Turn on or off the content menu of VCDs/SVCDs with PBC (playback control) feature.
[On] - Display the index menu when you load a disc for play.
[Off ] - Skip the menu and start play from the fi rst track.
[Mp3/Jpeg Nav]
Select to display the folder s or display all the fi les.
[View Files] - Display all the fi les.
[View Folders] - Display the folder s of MP3/ WMA fi les.
[Password]
Set or change the password for locked discs and play res tricted DVDs.
1. Press the Numeric buttons to enter ‘136900’ or the last set password at [Old Password] fi eld.
2. Enter the new password at [New Password] fi eld.
3. Enter the new password again at [Confi rm PWD] fi eld.
4. Press OK to exit the menu.
Note
If you for get th e pass word , enter ‘136900 ’ befor e you set a new pas swor d.
[DivX Subtitle]
Select a character set that suppor ts the DivX subtitle.
[Standard] - English, Irish, Danish, Es tonian, Finnish, French, German, Italian, Por tuguese, Luxembourgish, Norwegian (Bokmål and Nynorsk), Spanish, Swedish, Turkish
Note
Ensure that the subtitle fi le has the exact same fi le name as the m ovie fi le. If for example the fi le nam e of the movie is ‘Movie.avi’, then you need to nam e the text fi le ‘Movie.sub’ or ‘Movie.srt’.
[Version Info]
Display the sof tware ver sion of this product.
Note
This information i s requ ired w hen you w ant to fi nd out if a newest sof twa re ver sion i s avail able at the Phi lips websi te that you may dow nload a nd ins tall o n this product.
[Default]
Reset all the settings of this product to factor y default, except for [Disc Lock], [Parental Control] and [Password] settings.
EN
18
8 Additional information
Update software
For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.
Caution
Power supply mu st not be inter rupted during software upgrade.
1 Press SETUP. 2 Select [Preferences] > [Version Info], and
then press OK.
3 Write down the fi le name, and then press
SETUP to exit the menu.
4 Visit www.philips.com/suppor t to check for
the latest sof tware version, using the fi le name for this product.
5 Refer to the upgrade instructions on the
website for more information.
Note
Disconnec t the power cord for a few seconds and connect aga in to tur n on the product.
Care
Caution
Never u se solv ents s uch as benzen e, thi nner, cle aner s available commercially, or anti-static sp rays intend ed for di scs.
Clean discs
Wipe the disc with a micro fi bre cleaning cloth from the centre to the edge in a straight line movement.
Specifi cations
Note
Speci fi cation a nd design are subje ct to change wi thou t notice
USB
Compatibility: Hi-Speed USB (2.0)• Class suppor t: UMS (USB Mass Stor age Class)
Video
Signal system: PAL / NTSC• Composite video output: 1 Vpp ~ 75 ohm• Component video output: 0.7 Vpp ~ 75 ohm
HDMI outpu t: 480i, 480p, 576i, 576p, 720p, • 1080i, 1080p
Audio
Analog stereo output• Signal to noise r atio (1 kHz): > 90 dB (A-weighted)• Dynamic Range (1 kHz): > 80 dB (A-weighted)• Cross talk (1 kHz): > 90 dB• Distortion/noise: (1 kHz): > 75 dB• MPEG MP3: MPEG Audio L3• Digital output
Coaxial
HDMI output
Main unit
Dimensions (w x h x d): 360 x 39 x 209 (mm)• Net Weight: approximately 1.48 kg
Power
Power supply rating: 110 - 240V, 50/60 HZ• Power consumption: < 10 W• Power consumption in standby mode: < 0.1 W
Accessories supplied
Remote control and bat teries• HDMI cable• Audio/Video cables• User Manual• Quick Star t Guide
Laser specifi cation
Type: Semiconductor laser InGaAIP (DVD), • AIGaAs (CD) Wave length: 655 nm (DVD), 790 nm (CD)• Output Power : 7.0 mW (DVD), 10.0 mW • (VCD/CD) Beam divergence: 60 degrees
9 Troubleshooting
Warning
Risk of elec tric s hock . Never remov e the ca sing of t he product.
To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
English
EN
19
Main unit
The buttons on this unit do not work.
Disconnect this product from the power • outlet for a few minutes , then connec t again.
No reaction to the remote control.
Connect this product to the power outlet.• Point the remote control at the IR sensor • located on the front panel of this product. Inser t the batteries correctly.• Inser t new batteries in the remote control.
Picture
No picture.
See the TVs user manual on how to select the correct input on the T V. Change the TV channel until you see the Philips screen. If you have turned on the progressive scan setting or change the TV system setting, switch back to default mode: 1) Press to open the disc compar tment. 2) Press the Numeric button ‘1’ (for progressive scan) or the Numeric button’3’ (for TV system).
No picture on HDMI connection.
If this product is connected to an unauthorized • display device with an HDMI cable, the audio/ video signal may not be output . Check if the HDMI cable is faulty. Replace a • new HDMI cable. If this happens when you change the HDMI • video resolution, you have to switch to its default mode: 1) Press compar tment. 2) Press the numeric button “1”.
to open the disc
Sound
No audio output from the TV.
Ensure that the audio cables are connected to • the audio input of the TV. Assign the audio input of the T V to the • corresponding video input. See the T V user manual for details.
No audio output from the loudspeakers of the audio device (stereo system/amplifi er/receiver).
Ensure that the audio cables are connected to • the audio input of the audio device. Turn on the audio device to its correct audio • input source.
No sound on HDMI connection.
You may not hear any sound from the HDMI • output if the connec ted device is non-HDCP compliant or only DVI-compatible. Ensure that the [HDMI Audio] setting is turned on.
No sound during DivX video playback
The audio codec may not be suppor ted by this • product.
Play
The disc cannot be played.
The disc is badly scratched, deformed, or dirty. Replace or clean the disc. Use the correct disc format or fi le format.
DivX video fi les cannot be played.
Ensure that the DivX video fi le is complete. Ensure that the fi le name extension is correct. Due to Digital Rights issue, the DRM- protected video fi les cannot be played through an analog video connec tion (e.g. composite, component and scar t). Use an HDMI connec tion to play these fi les.
The aspect ratio of the screen is not aligned with the TV display setting.
The aspect ratio is fi xed on the disc.
DivX subtitles are not displayed correctly.
Ensure that the subtitle fi le name is the same as the movie fi le name. Selec t the correct character set.
Press SETUP. Select [Preferences] > [DivX Subtitle] in the menu. Select the character set that supports the • subtitle.
10 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio of TV screens. The r atio of a s tandard T V is 4:3, while the ratio of a high-defi nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.
D
DivX Video-On-Demand
This DivX Certifi ed ® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the regis tration process and learn more about DivX video.
20
EN
H
HDMI
High-Defi nition Multimedia Inter face is a high-speed digit al interface that can transmit uncompressed high defi nition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI product s without HDCP (High­bandwidth Digital Content Protection) will result in no Video or Audio output.
J
JPEG
A very common digital still picture format. A still­picture data compression sys tem proposed by the Joint Photogr aphic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their fi le extension ‘.jpg’ or ‘.jpeg.’
M
MP3
A fi le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD- RW can contain about 10 times more data than a regular CD.
W
WMA
Windows Media™ Audio. Refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP. Files are recognized by their fi le extension ‘.wma.’
WMV [Windows Media Video]
Refers to a video compression technology developed by Microsoft Corporation. WMV content can be encoded by using Windows Media Encoder 9 series. Files are recognised by their fi le extension ‘.wmv’.
English
®
P
PBC
Playback Control. A system where you navigate through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search.
Progressive scan
The progressive scan displays twice the number of frames per second than in an ordinary TV system. It offer s higher picture resolution and quality.
EN2223
21
Language Code
Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072
Ё᭛
Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985
6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385
Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084
Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP3588_94_UM_V3.0_1025
Loading...