Philips DVD VCR Combo User Manual

DVD Player with Progressive

PC (Monitor)

/ Headphone

Scan Output

Connect the DVD to the TV using
Component Video cable.

Progressive
Scan Input
(CVI-1 SD/HD)

OUT

Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.

Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-1
(HD/SD).

Connect the Monitor (video) output
on the PC to the HDMI/PC-D

Input of the TV using a HDMI to
DVI cable

Connect the audio output on the
PC to the PC AUDIO In of the

TV using an audio cable as shown.

PC-D input

Connect the VCR to the TV using

After connecting all cables and

the S-Video cable.

devices switch on your TV.

.

Press the AV+ button on the
remote control then press

CURSOR V (down) to select
PC-D

.

Connect the 2 antenna cables for VCR
Recording. After connecting all cables and
devices switch on your TV.

Press AV+ button on the remote control, then
press CURSOR V (down)repeatedly to select

SIDE/SVHS.

Connect the Video cable from the Video output
on your camera or game console to the video
input located on the side of your TV. Connect the
left (white) and right (red) audio cables for sound.

Press the AV+ button on the remote control
then press CURSOR V (down) to select SIDE/
SVHS.

Note : For headphone connection, please insert
the plug into the headphone socket as shown.

TV side
connectors

TV rear connector

TV rear
connectors

SERV U

Composite
Audio / Video
(SIDE)

Add for VCR
recording

TV side
connectors

AV OUT

TV rear connector

SERV U

Other possible connections for DVD Player with Progressive Scan Output

Progressive Scan Input via
VGA (CVI-2 SD/HD)

See DVD Recorder / Player

HDMI

See HD Receiver

OUT

PC (Monitor)

Add for VCR
recording

See DVD Recorder / Player

3139 125 36161

programing

HD Receiver

Connect the component video jacks
from the HD receiver to the HDMI

/ PC-D of the TV using a HDMI
cable.

TV rear connector

Connect the antenna cables for
recording on your HD receiver.

After connecting all cables and
devices switch on your TV.

Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select HDMI

Add for
recording

Connect the 2 antenna cables for

Connect the Monitor (video) output
on the PC to the PC-VGA/CVI-2

Input of the TV using a VGA
cable

.

Connect the audio output on the

.

PC to the PC AUDIO In of the
TV using an audio cable.

After connecting all cables and
devices switch on your TV.

Press the AV+ button on the
remote control then press

CURSOR V (down) to select
PC-VGA

.

Connect the VCR to the TV using
Video cable (yellow).

VCR Recording. After connecting all
cables and devices switch on your TV.

Press AV+ button on the remote
control, then press CURSOR V
(down) until select AV/SVHS

.

1 When the TV is powered-on for the first time you will have to auto program the TV in
order to receive the channels that are broacasted locally.

2 Press the MENU button on the remote control to show the onscreen menu.

3 Press the CURSOR DOWN button repeatedly until Install is highlighted.

4 Press the CURSOR RIGHT button to enter the Install menu. Language will be highlighted.

5 Press the CURSOR DOWN button repeatedly until Auto Program is selected. “Start ?”

TV rear connector

Add for VCR

will appear.

recording

6 Press the CURSOR RIGHT button to start the Auto Programing process.

7 Press the STATUS/EXIT button to remove the menu from the screen when the Auto
programing process has finished.

VGA

SERV U

OUT

Composite
Audio / Video
(AV)

Add for VCR
recording

AUDIO

VIDEO

HDMI OUT

DIGI

TAL

AUDIO OUT

SATELLITE IN

AUDIO

VIDEO

in 2

OUT

OUT

L

Y

L

PB

R

PR

VIDEO

in 1

HD receiver

Other possible connections for HD receiver

Progressive Scan Input
(CVI-1 SD/HD)

See DVD Player with
Progressive Scan Output

CH 3
CH 4

REMOTEPHONE JACK

VCR

CONTROL

RF

S-VIDEO

T TO TV

OU

IN FROM ANT

Add for
recording

Progressive Scan Input via
VGA (CVI-2 SD/HD)

See DVD Recorder / Player

PC (Monitor)

TV rear connector

SERV U

Other possible connections for VCR

See Set-Top Box

x 1

x 2

26PF5321

x 1

x 2

x 6

32PF532142PF7321

x 1

x 4

x 1

B

26PF5321

x 1

x 3

Please handle with
care. Use only the
soft cloth provided,
to clean the glossy,
black front of the TV.

x 1

FOR VESA MOUNTING
(NOT INCLUDED)

Í

FOR WALL MOUNTING
(INCLUDED ONLY FOR 42PF7321)

415

117

688

32PF5321

A

1249

VESA

100mm

Í

26PF5321

100mm

100mm

After connecting all cables and

Connect the DVD to the TV using
Component Video cable.

devices switch on your TV.

B

VESA

800 x 400 mm

It can be also used to connect a
PC via DVI connector.

Progressive Scan input
(CVI-1 SD/HD)

Provide superior picture quality
when using a Progressive Scan
signal in HD mode via Y-Pb-Pr
connector.

Component
Video Input
(CVI)

VGA (PC-VGA or
CVI-2 SD/HD)

Connect to your PC via VGA
connector. It can be also used
to connect a Progressive Scan
device (using the YPbPr-VGA
adapter)

S-Video
(SVHS)

Composite
Audio / Video
(AV or SIDE)

connection from your AV
equipment.

Connect the Set-Top Box to
the TV using an antenna cable.

TV rear connector

OUTPUT CH

4

Tune in the TV the same
channel selected in the Set-Top
Box.

Signal input Cable from
the Cable Provider

OUT

Component
Video Input
(CVI-1 SD/HD)

TV rear connector

VESA

100mm

100mm

100mm

1

B

Í

42PF7321

B

B

2

A

A

A

Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.

Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-1

(HD/SD).

32PF5321

A

Please be aware that the side Audio/Video
connectors are difficult to

connecting standard cables.

when

access and use

B

3

4

B

Tighten

SERV U

SERV U

B

After connecting all cables and
devices, switch on your TV.

Connect the DVD to the TV
using YPbPr - VGA adapter.

Connect the 2 antenna cables for
DVD Recording. After connecting all
cables and devices switch on your TV.

42PF7321

A

A

Please be aware that the side Audio/Video
connectors are difficult to

connecting standard cables.

when

access and use

programing

26PF5321
32PF5321

42PF7321

After connecting all cables
and devices, plug in the power
and switch on your TV.

TV rear connector

Connect the Set-Top Box to the
TV using Composite Video (AV)
plug into their corresponding
jacks.

Composite
Audio / Video
(AV)

TV rear connector

Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select

AV/SVHS

.

Signal input Cable from
the Cable Provider

OUT

For sound connect the left (white) and
right (red) audio cables to the left
(white) and right (red) audio input of
your TV (PC AUDIO IN).

OUT

Press AV+ button on the remote
control, then press CURSOR V
(down) repeatedly to select CVI-2

(SD/HD).

Component Video
Input via VGA
(CVI-2 SD/HD)

B

B

C

Please be aware that when you mount

TV on the wall

your
system,

the side Audio/Video connectors
are difficult to
connecting

using the

access and use when

standard cables.

C

key hole

CAUTION : This is a
Class 1 apparatus. It
must be connected to a
MAINS socket out with
a protective earthing
connection.

S-Video (SVHS)

Component Video
Input (CVI)

See DVD Recorder/Player

SERV U

TV rear connector

S-Video (SVHS)

SERV U

Composite
Audio/Video (AV)

Turn your page to see other connections.