Philips DVDR3575H, DVDR3577H, DVDR3595H, DVDR3597H Getting Started Guide

Connect

ANTENNA-IN

TV-OUT

TO TV

EXT1 TO VCR/SAT

EXT2

HDMI OUT

CVBS OUT

S-VIDEO OUT

VIDEO OUT

COAXIAL

DIGITAL OUT

AUDIO OUT

AUDIO

Before connecting

Select the most suitable connection (A or B or C) based on the type of device you have and your home set up. You can also refer to the accompanying User Manual for other possible connections.

Connecting Recorder and TV

with antenna only

A Unplug the existing antenna cable from your TV and

connect it to the ANTENNA IN socket on this recorder.

B Connect an RF antenna cable (supplied) from the

TV-OUT socket on this recorder to the Antenna In socket on the TV.

C Connect a scart cable (supplied) from the

EXT1-TO TV scart socket on this recorder to the SCART socket on your TV.

D Plug in the power cable from the recorder to an AC

power outlet

ANTENNA-IN

TV-OUT

TO TV

EXT1 TO VCR/SAT

EXT2

HDMI OUT

CVBS OUT

S-VIDEO OUT

VIDEO OUT

COAXIAL

DIGITAL OUT

AUDIO OUT

AUDIO

TO VCR

TO TV

A Keep the existing scart connection between the

Cable Box/Satellite Receiver and your TV.

If your TV only has one Scart connector, then

replace the scart connection with antenna connections (see option B).

B Connect a scart cable (not supplied) from the

EXT2-TO VCR/SAT scart socket on this recorder to the SCART (TO VCR) socket on the Cable Box/Satellite Receiver.

C Connect a scart cable (supplied) from the

EXT1-TO TV scart socket on this recorder to the SCART socket on your TV.

D Plug in the power cable from the recorder to an AC

power outlet

Set up

ANTENNA-IN

TV-OUT

TO TV

EXT1 TO VCR/SAT

EXT2

HDMI OUT

CVBS OUT

S-VIDEO OUT

VIDEO OUT

COAXIAL

DIGITAL OUT

AUDIO OUT

AUDIO

SCART

Note:

Your new Philips Recorder replaces the VCR for your recording needs. First, unplug all the connections from your VCR.

A Follow A connection before you proceed to step 2

below.

Note The antenna connection may not be required, depending on the capabilities of your Cable Box / Satellite Receiver. Refer to its user manual for more information.

B Connect a scart cable (not supplied) from the

EXT2-TO VCR/SAT scart socket on this recorder to the SCART socket on the VCR.

C Plug in the power cable from the recorder to an AC

power outlet

Connecting Recorder and TV

with Cable TV or Satellite Receiver

Connecting Recorder, TV and

VCR

Antenna

Television ( rear)

Television

(rear)

Philips Recorder (rear)

Television ( rear)

Philips Recorder (rear)

Finding the viewing channel

A Press STANDBY-ON on the recorder. B Turn on the TV.

You should see the installation menu.

Dansk

Français

Italiano Nederlands

Norsk

Español

Deutsch

Menu Language

English

Please select your language. Denes the languages of all on-screen menu displays.

C In case you don’t see the recorder’s setting menu,

press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the menu. This is the correct viewing channel for the recorder.

Start initial installation

Use the recorder’s remote control and follow the onscreen instructions to complete the installation.

A Select the desired menu language, your country and

the TV shape.

Note Press OK or the Green button on the remote control to go to the next screen

B Press OK to start automatic analogue channel

search.

Channel search

Start Auto search

C Once complete, press the Green button to

continue.

D Enter the correct time in the entry field, press OK

followed by the Green button to continue. Proceed the same for date entry.

E To continue with the GUIDE Plus+ installation,

press the Green button.

Otherwise, press the Red button to skip.

Enjoy

Satellite dish/

Cable TV wall outlet

(option B)

Antenna

VCR (rear)

About the Time Shift Buffer (TSB)

Once you turn on the recorder, the selected TV programme will be stored in a temporary hard disk storage called Time Shift Buffer ‘TSB’. The ‘TSB’ can store up to 6 hours of programmes temporarily.

Press INFO to display the Time Shift video bar.

Notes:

- The contents in the time shift video bar will be

cleared when you press STANDBY ON (2).

- The blue LED on the recorder will be lit up when the Time Shift Buffer is active or when you playback a recording from the hard disk drive.

Watch TV – Pause live TV

Your Philips Recorder allows you to control the TV programme. You can PAUSE it as if you were in control of the live broadcast.

A Turn on your recorder to the live TV mode and

press P +/- to select a TV programme.

B Press PAUSE LIVE TV to suspend it. C Press PAUSE LIVE TV

again to continue.

D To return to live broadcast, press LIVE TV.

About the internal hard disk drive

This recorder’s hard disk drive can be used as a Media Jukebox, allowing you to store and playback your TV programmes, videos, music and photos  les.

Press HOME on the remote control to access your contents stored in the { Hard Disk }.

Current time of playback

Selected clips for recording

Programmes stored in the ‘TSB’

Start time of the programme

Present time

INFO

HOME

LIVE TV

TIMER

PAUSE LIVE TV

GUIDE Plus+

Install the GUIDE Plus+ system

Follow the on-screen instructions to select your

language, country and enter the postal code of your area.

Note If no or wrong postal code is entered, it will cause no GUIDE Plus+ (EPG) service information.

Load the TV listing data

A Press TIMER (GUIDE Plus+)

to exit GUIDE Plus+ system. Leave the recorder in ‘standby’ mode and turn ‘on’ the set-top box overnight to collect the TV listing data, this may take up to 24 hours.

Note If you tune to your Host Channel before going

to ‘standby’ mode, this recorder will start downloading the TV listings data immediately.

B Check the { Editor } screen the next day to ensure

the source and programme numbers are matching for all channels.

Now

22:04:30

dvdr357xh-359xh_31qsg_eng_28381.1 1dvdr357xh-359xh_31qsg_eng_28381.1 1 2007-06-15 11:41:20 AM2007-06-15 11:41:20 AM

Enjoy

Need help?

User Manual

See the user manual that came with your Philips Recorder

Online

Start playback

Playback from hard disk

A Press HOME.

Disc Tray

USB

Recordings

Video les

Music

Photo

Source Content

Hard Disk

B Select { Hard Disk } and press  right. C Select the contents type and press  right. D Use   keys to reach the title/file you want

to play and press u to start playback.

Playback from disc

A Hold down STOP until the disc tray opens. Load a

disc and close the disc tray.

B Press HOME and select { Disc Tray }. C Use   keys to reach the title/file you want

to play and press u to start playback.

Playback from USB device

A Insert the USB device to the USB socket. B Press USB to show the contents list. C Select the contents type and press  right. D Select a data file

(MP3, WMA, DivX and JPEG)

and

press u to start playback.

Hard Disk / DVD Recorder

Quick Start Guide

Connect

Set up

Enjoy

What’s in the box?

Hard Disk/ DVD Recorder

RF antenna cable

(connect between

recorder and TV)

Remote Control

and 2 batteries

User

Manual

Scart cable

SUBTITLE

INFO SELECT EDIT SCART

AUDIO

PAUSE LIVE TV

Record to hard disk

Record current TV programme

A Press REC to start recording. It can record up to

6 hours.

Note To set the recording time length, press REC repeatedly to extend the recording time in 30-minute increments, up to 6 hours.

B To stop the recording before the scheduled time,

press STOP.

Mark a speci c content in the Time

Shift Buffer for recording

A Press  left or  right to search for the scene

where you want to record.

B Press REC

to start recording from here.

Note Pressing the Red button will cancel the recording.

C Press  right to search for the scene to end the

recording, then press STOP.

Note The title will be marked in red and the recording will only take effect when you turn off the recorder.

Copy  les from USB

You can only copy the data  les (MP3, WMA, DivX and JPEG) from your USB device to the recorder’s hard disk drive or recordable DVD.

A Insert your USB device to the USB port at the front

panel of the recorder.

B Press USB on the remote control. C Use   keys to reach the file you want to

copy.

D Press the Green button for { Copy }.

E Select the destination for copying and press OK.

Note If select { To Disc }, insert an empty recordable DVD into the recorder.

F Press OK again to start copying.

Copy  les from Disc

Copy prohibited contents cannot be copied to this recorder.

A Insert a CD/DVD into the recorder. B Press HOME and select { Disc Tray }. C Use   keys to reach the title/file you want

to copy.

D Press the Green button for { Copy }.

E Select the destination for copying and press OK.

Note Only data  les are able to copy to USB device.

F Press OK again to start copying.

Using the GUIDE Plus+ system

Make sure that the GUIDE Plus+ TV listing data download is completed.

A Press TIMER (GUIDE Plus+).

It shows the list of TV programmes that are currently broadcast and the next 8 days of TV programmes.

B Press  down to select a TV channel.

Notes

– To see an overview of all the available channels,

press the Yellow button on the remote control.

– To go directly to the previous day’s or the next

day’s TV listing, press í/ë.

– To scroll up or down a page, press P +/-.

C Press  left or  right to select a TV programme. D Press the Red

button on the remote control to set

the highlighted programme for recording.

Note You can store up to 25 programmes for

recording.

Copy TV programmes or  les

Copy TV programmes from hard

disk

A Insert a recordable DVD into the recorder. B Press HDD LIST on the remote control. C Select a title to copy and press the Green button

on the remote control for { Copy }.

D The making disc copy information appears. Press

the Green button again to start copying.

Note It is not possible to copy the TV recordings to

USB device.

DVDR3575H / DVDR3577H DVDR3595H / DVDR3597H

dvdr357xh-359xh_31qsg_eng_28381.2 2dvdr357xh-359xh_31qsg_eng_28381.2 2 2007-06-15 11:41:21 AM2007-06-15 11:41:21 AM

21:00

Cancel Rec.

22:13

23:30

Prog Info

HDD LIST

REC

TIMER

TV guide

USB

HOME

STOP

Record

Channels Home

Target for copy. Choose destination for copy.

To Hard Disk

To Disc

Target for copy. Choose destination for copy.

To Hard Disk

To USB