Philips DVDR3432V-12 User Manual
Quick Start Guide
2006 © Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 245 22172
Need help?
User Manual
See the user manual that came with your
Philips recorder.
Online
go to www.philips.com/support.
3
Enjoy
Start recording
A
Record to DVD or VCR
A
Press DVD to record to a recordable DVD.
Or, press VCR to record to a VHS tape.
B
Load in a blank recordable DVD to the disc tray or a
VHS tape to the tape deck.
C
Press SOURCE repeatedly to select the source to
record from (eg, TUNER, CAM1, DV, EXT1 or EXT2).
z To record a TV programme, use P+/- on the
remote control to select a programme channel.
D
Press REC MODE repeatedly to select a desired
recording mode (refer to the Record Mode table).
E
Press REC to start recording.
Note To set the recording time, press
repeatedly to extend the recording time in 30-minute
increments. The recording will stop automatically at
the designated end time.
z If record from an external device, press PLAY on
the device to start playback.
F
To stop the recording, press STOP .
B
Dubbing (DVD î VCR)
A
Press DVD to dub from DVD to VCR.
Or, press VCR to dub from VCR to DVD.
B
Get ready the appropriate disc and VHS tape in the
recorder.
C
Press DIRECT DUBBING .
OK
SP
Rec. Mode
OK Cancel
01H54M
Remaining Time
D
Select the desired recording mode, then move to
OK
in the menu and press
on the remote
control to start dubbing.
E
To stop the dubbing, press STOP .
DVD Recorder / VCR DVDR3430V
DVDR3432V
Connect
Set up
Enjoy
1
2
3
What’s in the box?
DVD Recorder / VCR
Remote Control
and 2 batteries
RF Coaxial Cable
User
Manual
Start playback
A
From a disc
A
Press DVD on the remote control.
B
Press OPEN/CLOSE , load a disc and close
the disc tray.
C
Press PLAY/PAUSE to start playback.
D
To stop playback, press STOP .
B
From a VHS tape
A
Press VCR on the remote control.
B
Insert a pre-record VHS tape into the tape deck.
Press REW to rewind the tape if necessary to the
beginning of the recording.
C
Press PLAY/PAUSE to start playback.
D
To stop playback, press STOP .
REC MODE
VCR
DVD
PLAY/PAUSE
SOURCE
PREV
NEXT
1
Connect
2
Set up
D
Setup and install TV channels.
Highlight and press right X.
Select { Channel Search } and press to start
automatic TV channel search.
p
t
t
h
h
Note This process may take several minutes. Once
complete, the total number of channels found and
stored appears on the TV.
E
Set the date and time.
Highlight and press right X.
Select { Date (dd/mm/yy) } or { Time (hh/mm/ss) }
and press . Use the numeric keypad 0-9 to
input the date/time, then press to confirm.
k
6
00:05:08
o
yy)
)
g
Note The settings will be updated according to the
broadcast channel information of preset Programme
Number 1.
F
Press SETUP to exit.
Basic Connection
Before Connecting
Select one of the following basic connections ( A or B ) according to the type of connecting devices you have.
If your TV is currently connected to a VCR, you have to unplug all the connections from your VCR and TV.
Your new Philips Recorder replaces the VCR for your recording needs.
Option A
Use this connection if you are connecting the antenna
cable directly from the antenna wall socket or from a
Cable Box without a Scart output socket.
A
Unplug the antenna cable that is currently connected
to your TV and plug in the antenna cable to the
ANTENNA socket on this recorder.
B
Use the supplied RF coaxial cable to connect the
TV socket on this recorder to the Antenna In
socket on the TV.
C
Use a scart cable (not supplied) to connect the
EXT1 TO TV-I/O socket on this recorder to the
Scart input socket on your TV.
D
Plug in the power cable from the recorder to an AC
power outlet.
~
MAINS
TO TV - I/O
EXT1
AUX - I/O
EXT2
S-VIDEO
(Y/C)
AUDIO
AUDIO
COMPONENT
VIDEO
R
L
P
R
P
B
Y
AUDIO / VIDEO OUT AUDIO / VIDEO OUT 1
VIDEO
(
CVBS
)
COAXIAL
DIGITAL AUDIO OUT
ANTENNA
TV
SCART IN
From an offair antenna
wall socket or
cable box
Television ( rear)
Note See the accompanying user manual for other possible connections (e.g. Composite Video, S-VIDEO).
Option B
Use this connection if your current antenna cable is
connecting through a Cable Box with Scart output
socket.
A
Keep the existing antenna connection from the Cable
box to your TV.
B
Use a scart cable (not supplied) to connect the
EXT1 TO TV-I/O socket on this recorder to the
Scart input socket on your TV.
C
Use another scart cable to connect the
EXT2 AUX-I/O socket on this recorder to the
Scart output socket on the Cable Box.
D
Plug in the power cable from the recorder to an AC
power outlet.
~
MAINS
TO TV - I/O
EXT1
AUX - I/O
EXT2
S-VIDEO
(Y/C)
AUDIO
AUDIO
COMPONENT
VIDEO
R
L
P
R
P
B
Y
AUDIO / VIDEO OUT AUDIO / VIDEO OUT 1
VIDEO
(
CVBS
)
COAXIAL
DIGITAL AUDIO OUT
ANTENNA
TV
SCART IN
Philips Recorder (rear)
From an off-air
antenna wall socket
Television ( rear)
Philips Recorder
(rear)
Cable Box (rear)
A
Finding the viewing channel
A
Press STANDBY-ON on the recorder.
B
Turn on the TV and other connected devices (e.g.
Cable Box, Satellite Receiver).
C
If your TV does not switch to the correct viewing
channel, press the Channel Down button (or AV,
SELECT, ° button) on the TV’s remote control
repeatedly until you see the blue DVD background
screen. This is the correct viewing channel for the
recorder.
B
Start basic setup
Use the recorder’s remote control and follow the onscreen instructions to complete the installation.
A
Press SETUP on the remote control.
y
r
l
y
h
On
OK
Note Use up S and down T keys to toggle
through the options. Select an item by pressing
right X. To con rm a setting, press
.
B
Select the country of your residence.
Highlight and press right X.
Select { Country } and press to confirm your
selection.
C
Select the recorder’s menu display language.
Remain in mode, select { On Screen Display
Language } and press right X.
Select the desired language option and press
to
con rm your selection.
Setup Menu - Channel Setu
Channel Searc
Sort Channels
Searc
Edi
Sor
Setup Menu - Genera
German
Englis
Countr
Screen Save
Reset Menu Settings
Setup Menu - Cloc
Date (dd / mm /
Time (hh : mm : ss
Date-Time Settin
01/01/0
Aut
Loading...