3 Enjoy
Start playback
A Press OPEN/CLOSE on the front of the recorder, load in a disc and close the disc tray.
BPress DISC MENU and use up
or down
keys to select a title.
CPress PLAY to start playback.
D To stop playback, press STOP
.
Start Recording
Recording from the TV or an external device
AInsert a recordable DVD disc in the tray.
BPress REC SOURCE repeatedly to select the source to record from. (eg, TUNER, CAM1, DV, EXT1 or EXT2).
To record a TV programme, use up or down
keys to scroll through the channels, or press 0
-9
to select the channel that you want to record.
Recording from the TV or an external
device (continued)
CPress REC MODE repeatedly to select the recording mode.
Record Quality |
Hours of Recording that can be stored |
|
4.7 GB DVD±R/±RW disc |
|
|
High Quality HQ |
1 |
Standard Play SP |
2 |
|
|
Extended Play EP |
4 |
Super Long Play SLP |
6 |
Types of discs for recording
EPress REC to start recording, press REC
again to automatically record 30 minutes.
FTo end recording, press STOP . ‘UPDATE’ will be displayed on the recorder.
GTo playback the recording, press DISC MENU
, select the title and press PLAY
.
Need help?
User Manual
See the user manual that came with your Philips recorder.
Online
Go to www.philips.com/support.
2006 © Koninklijke Philips N.V. All rights reserved.
12 NC 3139 245 21191 www.philips.com
DVD Player/ Recorder |
DVDR3380 |
Quick Start Guide
1 Connect
2 Set up
3 Enjoy
What’s in the box?
DVD Player/ Recorder
User
Manual
|
|
|
|
|
|
|
|
|
|
Remote Control |
RF Coaxial Cable |
SCART Cable |
|
|
|
||||
and 2 batteries |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Connect
Start with the ‘Basic Connection.’
If you have a VCR, follow the instructions for ‘Connection with a VCR or similar device’.
Basic Connection
Television (rear)
To antenna or
SCART IN
set-top box
|
|
|
To AC |
|
|
|
power |
Philips recorder |
|||
(rear) |
|
|
|
EXT2 |
AUX - I/O |
EXT1 |
TO TV - I/O |
TV-OUT ANTENNA-IN |
|
|
MAINS~ |
|
|
|
ABefore connecting, unplug the antenna cable that is currently connected to your TV.
BConnect the antenna cable to the ANTENNAIN jack on the recorder.
CUse the supplied RF coaxial cable to connect the TV-OUT jack on this recorder to the Antenna In jack on the TV.
DUse the SCART cable to connect the EXT1 TO TV-I/O socket on this recorder to the corresponding SCART input socket on the TV.
EConnect the power cable from the recorder to an AC power outlet.
Connection with a VCR or similar device
ABefore Connecting
Your new Philips recorder replaces the VCR for your recording needs. First, unplug all the connections from your VCR.
BConnecting
Television (rear)
To antenna or
SCART IN
set-top box
VCR or similar device (rear)
To
AC power
EXT2 |
AUX - I/O |
TV-OUT ANTENNA-IN |
MAINS~ |
|
Philips recorder (rear)
AFollow the steps under ‘Basic Connections’ before you proceed to step B below.
BUse another SCART cable (not supplied) to connect the EXT2 AUX-I/O SCART socket on this recorder to the SCART OUT socket on the VCR.
CConnect the power cable from your VCR to an AC power outlet.
Note In this setup, the VCR cannot record TV programmes.
For additional connection diagrams, see the accompanying User Manual.
2 Set up
AFinding the viewing channel
STANDBY-ON
Philips recorder (front panel)
A Press STANDBY-ON on the recorder.
B Switch on the TV set.
Note If connected to your VCR, make sure it is switched off or in standby mode before
proceeding.
C In case you do not see the recorder’s blue wallpaper, press “0” and the Channel Down button on the TV’s remote control repeatedly (or AV, SELECT, ° button) until you see this screen. This is the correct viewing channel for the recorder.
B Initial Installation
APress SYSTEM MENU on the remote control.
System Menu - General
Screen Saver |
On |
Country |
Germany |
Video Output Format |
PAL |
Restore Factory Settings |
OK |
Note Use up or down
keys to toggle through the options. Select an item by pressing right
. To confirm a setting, press OK
.
B Select the country of your residence.
Highlight and press right
.
Select { Country } and press right |
to |
access the options. Press OK to confirm your selection.
C Select the OSD language.
Highlight and press right
.
Select { On-Screen Display Language } and press right to access the options. Press OK
to confirm your selection.
D Setup and install TV channels.
Highlight and press right
.
Select { Channel Search } and press OK on the remote control to start automatic TV channel search.
E Setting the date and time.
Highlight and press right
.
Select { Date (dd/mm/yy) } or { Time (hh/mm/ss) } and press OK .
Use the numeric keypad 0 -9
to input the date/time, then press OK
to confirm.
Note The settings will be updated according to the broadcast channel information of preset Programme Number 1.
F Press SYSTEM MENUto exit.