Philips MX3910D/37, MX3960D, DVD HOME THEATER SYSTEM CLASS D AMPLIFIER MX3910D-17B User Manual

P-SCAN

ON OFF

Pb

DIGITAL

OUT

DIGITAL

IN

AUX

IN

TVINLINE

OUT

AUDIO

VIDEO

OUT

CVBS

S-VIDEO

FM ANTENNA

AM

L

R

~ AC MAINS

SPEAKER SYSTEMS (4Ω)

SUB-

WOOFER SURROUND CENTER FRONT

L

R

SL

SUB

SR

C

Pr

Y

Front Speaker

(Right)

Center Speaker

Front Speaker

(Left)

Rear Speaker

(Surround Left)

Subwoofer

Rear Speaker

(Surround Right)

FM Antenna

AM Antenna

MX3910D • MX3960D

1

2

PUSH

OUT

PUSH

IN

VIDEO

AUDIO

OUT IN

Pr/Cr Pb/Cb Y

S-VIDEO

IN

COMPONENT

VIDEO IN

75

V

L

R

Pr/

CrPb/

CbY

OUT

I

N

VIDEO

AUDI

O

S-VIDEO

I

N

Rear of TV

(example only)

12nc: 3139 115 23091

Printed in China

Helpful Hints

You only need to make one video connection to
your TV in order to view the DVD playback.

If your TV has

this video input jack(s)

1

2

3

Use this

video cable(s)

not supplied

S-VIDEO

IN

VIDEO

IN

Component Video

ANTENNA IN

If your TV has only a
single Antenna In jack,

you will need an accessory

RF modulator. The RF
modulator converts the video
from the DVD system so it can
play through the TV’s Antenna
connector. Refer to your
owner’s manual for proper
connection (refer to page 13).

Do not switch the P-SCAN to ‘ON’ position, unless you have
connected the DVD system to a Progressive Scan TV using the
Component (Pr Pb Y) video jacks.

P-SCAN

ON OFF

When listening to TV programs, press TV/AV button on the remote to set the
DVD system to TV/AV mode in order for the sound to be heard.

If you want to connect your VCR, refer to page 15 in the owner’s manual.

First connect ...

... then play

(see next page)

Connecting Speaker Cable

Detailed playback features and additional functions are described in the

accompanying owner’s manual.

DVD VIDEO DIGITAL SURROUND SYSTEM

STOPPLAY•PAUSE SEATING

STANDBY-ON

iR SENSOR

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

TREBLE

BASS

SOURCE

VOLUME

PROG TUNINGCLOCK•TIMER

SURROUND

SEARCH

5 DISC CHANGER

SURR. LEFT SURR. RIGHT LEFT RIGHTCENTER SUBWOOFER

OPEN•CLOSE

AV IN

TV/AV

DISC/

MEDIA

TUNER

AUX/DI

123

456

789

0

REPEAT REPEATDISC SKIP

DISC MENU

PROGRAM

SYSTEM MENU

DIM SLEEP SUB TV VOL

VOICE MUTE

SEATING ZOOM

PREV NEXT

STOP PLAY/PAUSE

A-B

SURR.

SOUND

VOL

OK

SUPER VIDEO

1

4

5

2

3

4 CHANNEL 3

Make sure your DVD system

and TV are connected and

turned on!

Playing a disc

1 Press DISC/MEDIA on the remote control.

You can also adjust the SOURCE button at the front panel until “DISC X” appears on the display
panel.

2 Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system).

3 Press OPEN•CLOSE 0 at the front of the DVD system and load a disc, then

press the corresponding OPEN•CLOSE 0 again to close the disc tray.

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.

4 Playback will start automatically.

If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then
press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the
instructions given in the disc menu.

5 To stop playback, press STOPÇ.

Region Codes

DVDs must be labeled for ALL regions or for Region 1 in order
to play on this DVD system.

ALL

1

If a DVD does not play
properly, please contact Philips
at 1-800-531-0039 for
assistance. Due to the
inconsistency of disc formats
provided by various disc
manufacturers, your DVD
system may require a
playability enhancement or
upgrade. As DVD technology
advances, these enhancements
will become common and will
be easy to complete.

Helpful Hints

No picture!!

Check the AV (Audio/Video) mode on your TV.

* Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or

VIDEO.

* Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see

the Video In channel.
* Or, your TV remote control may have a button or switch that chooses different video modes.
* Or, set the TV to channel 3 or 4 if you are using an RF modulator.
* See your TV manual for more details.

1

DVD VIDEO DIGITAL SURROUND SYSTEM

MX3910D • MX3960D

S

E

E

W

H

Y

I

N

S

I

D

E

I

M

P

O

R

T

A

N

T

!

Return

your Warranty

Registration Card

within 10 days

Need help? Call us!

Philips representatives are ready to help you with
any questions about your new product. We can guide you
through Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!

CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!

1-800-531-0039

or

Visit us on the web at www.philips.com

DVD HOME

CINEMA

SYSTEM

DVD HOME

CINEMA

SYSTEM

MX3960D

MX3910D

2

• Once your Philips purchase is registered,
you’re eligible to receive all the privileges
of owning a Philips product.

• So complete and return the Warranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

Warranty

Verification

Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves
as verification of owner­ship in the event of prod­uct theft or loss.

Model

Registration

Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.

t

This “bolt of lightning” indi­cates uninsulated material

within your unit may cause
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.

s

The “exclamation point” calls

attention to features for

which you should read the
enclosed literature closely to prevent
operating and maintenance problems.

WARNING:

TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.

CAUTION:

To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.

For Customer Use

Enter below the Serial No. which is locat­ed on the rear of the cabinet. Retain this
information for future reference.

Model No. _______________________

Serial No. ________________________

MAC5097

Know these

ssaaffeettyy symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

3

Congratulations on your purchase,
and welcome to the “family!”

Dear Philips product owner:

Thank you for your confidence in Philips.You’ve selected one of the best-built,
best-backed products available today.And we’ll do everything in our power to
keep you happy with your purchase for many years to come.

As a member of the Philips “family,” you’re entitled to protection by one
of the most comprehensive warranties and outstanding service networks
in the industry.

What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment
to your total satisfaction.

All of this is our way of saying welcome – and thanks for investing in a
Philips product.

Sincerely,

Lawrence J. Blanford
President and Chief Executive Officer

P.S. Remember, to get the most from your Philips product, you

must return your Warranty Registration Card within 10 days.
So please mail it to us right now!

R

E

G

I

S

T

R

A

T

I

O

N

N

E

E

D

E

D

W

I

T

H

I

N

1

0

D

A

Y

S

Hurry!

Visit our World Wide Web Site at http://www.philips.com

4

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near

water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in accordance with
the manufacturer´s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that

produce heat.

9. Do not defeat the

safety purpose of the

polarized or
grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.

10.

Protect the power cord from being

walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11.

Only use attachments/accessories

specified by the manufacturer.

12.

Use only with the cart, stand,

tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.

13 .

Unplug this apparatus during lightning

storms or when unused for long periods of
time.

14 .

Refer all servicing to qualified service

personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15.

Battery usage CAUTION – To

prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:

●

Install all batteries correctly, + and - as
marked on the unit.

●

Do not mix batteries (old and new or
carbon and alkaline, etc.).

●

Remove batteries when the unit is not used
for a long time.

IMPORTANT SAFETY INSTRUCTIONS

AC Polarized

Plug

16. Apparatus shall not be exposed to

dripping or splashing.

17. Do not place any sources of danger

on the apparatus (e.g. liquid filled

objects, lighted candles).

EL 6475-E004: 03/11

Class II equipment symbol

This symbol indicates that the unit has

a double insulation system

5

CAUTION

Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.

ATTENTION

L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.

ATENCIÓN

El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.

CAUTION

:

INVISIBLE
LASER RADIATION

WHEN OPEN. DO NOT STARE INTO BEAM.

DANGER

:

INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
KATSO SATEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.

OCH SPARREN AR URKOPPLAD.BETRAKTA EJ STRÅLEN.

DANGER - Invisible laser radiation when open.

AVOID DIRECT EXPOSURE TO BEAM.

or

This warning label is located on the rearside

and inside this laser product.

Canada

English:

This digital apparatus does not exceed the
Class B limits for radio noise emissions
from digital apparatus as set out in the
Radio Interference Regulations of the
Canadian Department of Communications.

Français:

Cet appareil numérique n'emet pas de
bruits radioélectriques dépassant les limites
applicables aux appareils numériques de
Class B prescrites dans le Règlement sur le
Brouillage Radioélectrique édicté par le
Ministère des Communications du Canada.

6

Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories. Confidential
Unpublished Works. ©1992-1999 Dolby
Laboratories, Inc. All rights reserved.

Manufactured under license from Digital
Theater Systems, inc. US Pat. No.
5,451,942 and other worldwide patents
issued and pending. “DTS” and “DTS
Digital Surround” are trademarks of
Digital Theater Systems, Inc.
Digital

This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.

1996-2000

Theater Systems, Inc.

All rights reserved.

This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:

– This device may not cause harmful
interference, and
– This device must accept any
interference received, including
interference that may cause undesired
operation.

Environmental information

All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet).

Your system consists of materials which
can be recycled and reused if disassembled
by a specialized company. Please observe
the local regulations regarding the disposal
of packaging materials, exhausted batteries
and old equipment.

English

Français

Español

7

Index

English ------------------------------------------------ 8

Français -------------------------------------------- 48

Español --------------------------------------------- 88

8

English

General Information

Supplied accessories .......................................... 10

Care and safety information ............................ 10

Connections

Step 1: Placing the speakers and subwoofer 11
Step 2: Connecting speakers and subwoofer11

Step 3: Connecting TV ..................................... 12

Using Composite Video jack (CVBS) ....... 12

Using Component Video jack (Pr Pb Y) ... 12

Using S-Video jack ........................................ 13

Using an accessory RF modulator ............ 13

Step 4: Connecting FM/AM antennas ............. 14

Step 5: Connecting the power cord............... 14

Connections (optional)

Connecting a VCR or Cable/Satellite Box .... 15

Viewing and listening to the playback ...... 15

Recording DVDs ........................................... 15

Connecting digital audio equipment .............. 15

Listening to the playback ............................ 15

Recording (digital) ........................................ 15

Functional Overview

Main unit and remote control ......................... 16

Control buttons available on the

remote only ................................................... 17

Getting Started

Step 1: Inserting batteries into the

remote control ................................................... 18

Using the remote control to operate the

system ............................................................. 18

Step 2: Setting the clock ................................... 18

Step 3: Setting the TV ........................................ 19

Changing the NTSC/PAL setting via the

remote control.............................................. 19

Selecting the color system that

corresponds to your TV .............................. 19

Step 4: Selecting speaker layout ...................... 20

Changing seating control position ............ 20

Setting the speakers’ channels ................... 21

Step 5: Setting language preferences .............. 21

Disc Operations

Playable discs ....................................................... 22

Playing discs ......................................................... 22

Turning on/off auto Eco standby mode ... 23

Using the Disc Menu ......................................... 23

Basic playback controls ..................................... 23

Resuming playback from the last stopped

point (DVD/VCD) ........................................ 23

Replacing discs without interrupting

playback........................................................... 23

Selecting various repeat functions .................. 24

Repeat play mode ......................................... 24

Repeating a section within a

chapter/track ................................................. 24

Program favorite tracks

(audio CDs and VCDs) .............................. 24–25

Clearing the program .................................. 25

Using the menu bar to program ..................... 25

Playing MP3/Picture disc (Kodak, JPEG) ........ 26

Program MP3 disc .............................................. 26

DVD Menu Options

Using the menu bar ........................................... 27

Using the Setup Menu ....................................... 28

Setting the TV shape .................................... 28

Setting the video output ............................. 29

Screen saver - turning on/off ...................... 29

Setting the analog output ............................ 29

Setting the digital output ............................ 30

Setting the PCM output .............................. 30

Night mode- turning on/off ........................ 31

Restoring the original settings ................... 31

Restricting playback by parental control . 32

Changing the password ............................... 33

Tuner Operations

Tuning to radio stations .................................... 34

Presetting radio stations ................................... 34

Using the Plug and Play ............................... 34

Automatic presetting ................................... 35

Manual presetting ......................................... 35

Selecting a preset radio station ....................... 35

Deleting a preset radio station .................. 35

Contents

9

English

Timer Operations

Setting the timer ................................................. 36

Activating/ Deactivating the timer ............ 36

Setting the Sleep timer ..................................... 37

Sound and Volume Controls

Sound Control .................................................... 38

Selecting surround sound ........................... 38

Turning on / off clear voice effect ............... 38

Adjusting Bass/ Treble level ........................ 38

Changing subwoofer volume level ............ 38

Selecting digital sound effects .................... 38

Volume Control .................................................. 38

Other Functions

Switching on/off .................................................. 39

Switching to active mode ............................ 39

Switching to Eco Power standby mode ... 39

Switching to standby mode (view clock). 39

Dimming system’s display screen .................... 39

Recording to an external device ..................... 39

Using the remote to operate your television 39

Troubleshooting ........................................... 40–41

Specifications .......................................................... 42

Glossary ......................................................................... 43

Limited Warranty .............................................. 44

Contents

10

English

General Information

Speaker cables

Subwoofer cable

Audio cable
(white, red)

Composite video
cable (yellow)

Component video
cables
(red/blue /green)

FM wire antenna

AM loop antenna

Remote Control
and two AA
batteries

AC power cable

Brackets and screws

(5x)

(4x)

TV/AV

DISC/
MEDIA

TUNER AUX/DI

123

456

789

0

REPEAT REPEATDISC SKIP

DISC MENU

PROGRAM

SYSTEM MENU

DIM SLEEP SUB TV VOL

VOICE MUTE

SEATING ZOOM

PREV NEXT

STOP PLAY/PAUSE

A-B

SURR.

SOUND

VOL

OK

Supplied accessories Care and safety information

Avoid high temperatures, moisture,
water and dust

– Do not expose the system, batteries
or discs to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight.) Always
keep the disc tray closed to avoid getting
dust on the lens.

Avoid condensation problem

– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.

Do not block the vents

– Do not operate the DVD system in an
enclosed cabinet and allow about 10 cm
(4 inches) of free space all around the
player for adequate ventilation.

10 cm

(4 inches)

10 cm

(4 inches)

10 cm

(4 inches)

DVD Home Cinema System

PHILIPS

Care of disc

– To clean a CD, wipe it
in a straight line from the
center towards the edge
using a soft, lint-free
cloth. Do not use
cleaning agents, as they
may damage the disc!
– Write only on the printed side of a
CD-R/CD-RW and only with a soft felt­tipped pen.
– Handle the disc by its edge, do not
touch the surface.

Care of the cabinet

– Use a soft cloth slightly moistened
with a mild detergent solution. Do not
use a solution containing alcohol, spirits,
ammonia or abrasives.

Finding a suitable location

– Place the player on a flat, hard, stable
surface.

11

English

Connections

Step 1: Placing the speakers

and subwoofer

Step 2: Connecting speakers

and subwoofer

1

1

3

3

2

4

Center speaker and
DVD system

Front Speaker

(Left)

Front Speaker

(Right)

Surround

Speaker (Left)

Surround

Speaker (Right)

Subwoofer

DIGITAL

OUT

DIGITAL

IN

AUX

IN

A

A

F

AN

L

R

SPEAKER SYSTEMS (4Ω)

SUB-

WOOFER SURROUND CENTER FRONT

L

R

SL

SUB

SR

C

AUDIO

INPUT

Front
Right

Front

Left

Surround

Right

Surround

Left

Subwoofer

Center

For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.

1 Place the front left and right speakers at

equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.

2 Place the center speaker above the TV or

the DVD system so that the center
channel’s sound is localized.

3 Place the surround speakers at normal

listening ear level facing each other or
mounted on the wall.

4 Place the subwoofer on the floor near

the TV.

Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to
your TV.
– Allow adequate ventilation around the
DVD system.

Connect the supplied speaker systems
using the supplied speaker cables by
matching the colors of the jacks and
speaker cables. Fully insert the stripped
portion of the speaker wire into the
jacks.

Speakers / Subwoofer - +

Front Left (FL) (L) black white

Front Right (FR) (R) black red

Center (C) black green

Surround Left (SL) black blue

Surround Right (SR) black gray

Subwoofer (SUB) black purple

Helpful Hints:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– Do not connect more than one speaker to
any one pair of

+/- speaker jacks.

– Do not connect speakers with an
impedance lower than the speakers supplied.
Please refer to the SPECIFICATIONS section
of this manual.

12

English

Connections

Step 3: Connecting TV

Pb

DIGITAL

OUT

DIGITAL

IN

AUX

IN

TV
IN

LINE
OUT

AUDIO

VIDEO

OUT

CVBS

S-VIDEO

FM ANTENNA

AM

L

R

SUB

-

WOOFER SURROUND CENTER FRONT

L

R

SL

SUB

SR

C

Y

AUDIO

OUT

Pr/Cr

Pb/Cb

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

AUDIO
OUT

Pr/Cr

Pb/Cb

Y

S-VIDEO
IN

VIDEO IN

COMPONENT
VIDEO IN

2

1

3

P-SCAN

ON OFF

P-SCAN

ON OFF

Pb

DIGITAL

OUT

DIGITAL

IN

AUX

IN

TV

IN

LINE
OUT

AUDIO

VIDEO

OUT

CVBS

S-VIDEO

FM ANTENNA

AM

L

R

SUB-

WOOFER SURROUND CENTER FRONT

L

R

SL

SUB

SR

C

Y

AUDIO

OUT

Pr/Cr

Pb/Cb

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

AUDIO
OUT

Pr/Cr

Pb/Cb

Y

S-VIDEO

IN

VIDEO IN

COMPONENT
VIDEO IN

2

1

3

Pr

IMPORTANT!
– You only need to make

one video
connection from the following
options, depending on the
capabilities of your TV.
– S-Video or Component Video
connection provides higher picture
quality. These options must be
available on your TV.
– Connect the DVD system directly
to the TV.

Using Composite Video jack (CVBS)

1 Use the supplied composite video cable

(yellow) to connect the DVD system’s
CVBS jack to the video input jack (or
labeled as A / V In, Video In, Composite or
Baseband) on the TV.

2 To hear the TV channels through this

DVD system, use the supplied audio
cables (white/ red) to connect TV IN
(L/R) jacks to the corresponding AUDIO
OUT jacks on the TV.

3 Set the P-SCAN switch to ‘OFF.’

IMPORTANT!
– If both S-Video and Component
(Pr Pb Y) Video are used to connect
to your TV, the video signal will
automatically switch to S-Video
when you power up the DVD
system. To set the VIDEO
OUT(put) to ‘Pr Pb Y’, see page 29.

Using Component Video jacks
(Pr Pb Y)

1 Use the supplied component video cables

(red/blue/ green) to connect the DVD
system’s Pr Pb Y jacks to the
corresponding Component video input
jacks (or labeled as Pr/ Cr Pb/ Cb Y or
YUV) on the TV.

2 To hear the TV channels through this

DVD system, use the supplied audio
cables (white/red) to connect TV IN
(L/ R) jacks to the corresponding AUDIO
OUT jacks on the TV.

3 If you are using a Progressive Scan TV

(TV must indicate Progressive Scan or
ProScan capability), set the P-SCAN
switch to ‘ON’. Otherwise, set it to ‘OFF.’