Philips DVD622 upgrade Manual

1. Introduction

The upgrade version of this software is Version 1.23

__________________________________________________________________

2. Key Features added in this software version

This software version includes:

• Fix the problems

o MP3-CD files cannot be read
o MP3-CD files cannot be completely read

__________________________________________________________________

3. Software Upgrade Disc Preparation

Tools Required

You will need the following items :

• PC (Pentium III 300MHz processor or higher)

• CD-R/RW writer and writing application software

• Blank CD-R or CDRW disc

• Broadband / High speed internet connection

__________________________________________________________________

4. How to download the software to your computer

1) Right mouse button click on the file and click ‘Save Target As… ’ to save

the zip file into your PC.

2) Unzip the .zip file and extract files into your PC.

__________________________________________________________________

5. Software Version Verification Procedure

It is important to write down the system version information of your set before you
start the upgrade procedure. This information is also useful in case you need to
call Philips Customer Care Center.

• Open the tray door of the player and press “display” or “onscreen” on

the remote control and check the software version.

__________________________________________________________________

6. Steps to upgrade DVD622

1. Rename files to “build.img” and “upgrade.ver” if it is not already named in

this manner.

2. Burn the files to blank CD R or CDRW, using the following settings:

· File System CD-ROM ISO Level 2

· Mode 1/2/XA

· Character set ISO 9660

· Finalised, single session

· Write speed slow (e.g. 2x, 4x)

Finalize the disc. (The application may do this automatically.)