Philips DV900VHS0I User Manual

Owner's Manual

Important!

Return your Warranty Re 1

Card within I 0 days. See

Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a

PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once.And take advantage of these important benefits.

Warranty Owner Model Verification Confirmation Registration

Registeringyour product within

10daysconfirms your right to max- imum protection under the terms and conditions of your

PHILIPSwarranty.

Your completedWarranty

RegistrationCard servesas verification of ownership in the event of product theft or loss.

PHILIPS

Congratulations on your purchase, and

welcome to the "family!"

D_ar PHILIPS product owner: Thank you for your confidence in PHILIPS.You've selected one of the best-built, best-backed products available today.And we'll do

everything in our power to keep you happy with your purchase for

many years to come. As a member of the PHILIPS"family;' you're entitled to protection

by one of the most comprehensive warranties and outstanding ser- vice networks in the industry.

What's more, your purchase guarantees you'll receive all the infor-

mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising

commitment to your total satisfaction.

All of this is our way of saying welcome-and thanks for investing in

a PHILIPSproduct.

Sincerely,

Robert Minkhorst President and Chief Executive Officer

RS.

Remember, to get the most from your PHILIPS prod- uct, you must return your Warranty Registration

Card within 10 days. So please mail

it to us right now!

Returningyour Warranty RegistrationCard right awayguaran-

teesyou'll receiveall the information

and specialoffers which youqualify for asthe owner of your model.

Know these

safetysymbols

_, This "bolt of lightning"indi-

cates uninsulated material

within your unit may cause an

electrical shock. For the safety of everyone in your household,

please do not remove product covering.

_The "exclamation point"

calls attention to features

for which you should read the

enclosed hterature closel'_ to prevent operating and mainte-

nance problems. WARNING: TO PREVENT

FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent elec- tric shock, match wide blade of

plug to wide slot, fully insert. ATTENTION: Pour eviter les

choc _lectriques, introduire la lame la plus large de la fiche darts la borne correspondante

de la prise et pousser jusqu'au fond.

For Customer Use

Enter below the SerialNo. which islocated on the rear of the cabinet.Retainthis infor-

mation for future reference. Model No.

Serial No.

SafetyandGeneralInformation3

Safety Precautions

Warning: To prevent fire or shock hazard,do not exposethis equipmentto rain or moisture.

Federal Communications Commission (FCC)Warning: Any unauthorizedchangesor modificationsto this equipmentvoid the user'sauthorityto operateit.

Department of Health and Human Services (DHHS) Certification: Complies with 21 Center for Radiation (CFR)chapterI subchapterJapplicableat time of manufacture.

Laser Safety

This unitemploysa laser.Only a qualifiedservice person should remove the coveror attemptto servicethis

device,due to possibleeye injury. CAUTION: USEOF CONTROLS OR ADJUSTMENTSOR PERFORMANCEOF PROCEDURESOTHER

THAN THOSE SPECIFIEDHEREIN MAY RESULTIN HAZARDOUS RADIATION EXPOSURE. CAUTION:VISIBLE AND INVISIBLELASERRADIATION WHEN OPEN AND INTERLOCK DEFEATED.DO NOT STAREINTO BEAM.THE BEAM ISLOCATED INSIDE,NEARTHE DECK MECHANISM.

Special Information for Canadian Users

This ClassB digitalapparatuscomplies with CanadianICES-003. Cet appareilnumerique dela classeB est conforme a la norme NMB-003 du Canada,

Radio/TV Interference

This eq_ipmenthasbeentested andfound to complywith the limitsfor a ClassB digitaldevice,pursuant to Part 15of the FCC Rules.Theselimits are designedto provide reasonableprotection againstharmful interfer-

encein a residential installation.Thisequipment generates,uses,and canradiate radio frequencyenergyand,if not installedand usedin accordancewith the instructions, maycauseharmful interference to radio communica-

tions.However,there is no guaranteethat interference will not occur in a particular installation.If this equip- ment does causeharmfulinterference to radio or television reception,which can bedetermined by turning the

equipment off and on, the user isencouragedto try to correct the interference by one or more of the follow- ing measures:

I) Reorient or relocate the receiving antenna,

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or anexperiencedradio/TV technicianfor help.

Unauthorized copying,broadcasting,publicperformanceandlendingof Discsare prohibited. This product incorporatescopyrightprotection technology that isprotected by method claimsof certainU.S.

patentsand other intellectualproperty rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by MacrovisionCorporation and isintended

for home and other limited viewing usesonly unlessotherwise authorized by MacrovisionCorporation, Reverse engineeringor disassemblyisprohibited.

Note to the Cable'lV System Installer: This reminder is provided to call the Cable'lV system installer's attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in

particular, specifyingthat the cableground shallbe connected to the grounding system of the building,as close to the point of cable entry as possible.

High Quality

This DVD/VCR isequipped with a High Quality (HQ) system andis compatiblewith existingVideo Home System(VHS) equipment.

Declaration of Conformity

Model Number: DV900VHS0I

Trade Name: Philips

ResponsibleParty: PhilipsConsumer Electronics

P.O.Box 14810 Knoxvine,TN 37914

(865) 521-4316

Manufacturedunder licensefrom Dolby Laboratories."Dolby" and the double-D symbol aretrademarks of Dolby Laboratories.Confidential UnpublishedWorks. (© 1992-1997Dolby Laboratories,Inc. All rights reserved.)

4 TableofContents

General Information

Safety and General Information ....... 3

Table of Contents ................. 4

Introduction ..................... 5

Playable Discs .................... 6

Playable Video Cassette Tapes ........ 7

Setting Up Your DVD/VCR

Hookups Without a Cable Box/Direct

Broadcast System ............... 8-9

Hookups With a Cable Box/Direct

Broadcast System ............. I0- I I

Optional Hookups ............. 12-14

Remote Control Setup ............ I5

Turning on Your DVD/VCR ......... 16

Automatic Channel Setup ........ 17-19

Setting the Clock ................. 20

Daylight-Savings Time ............. 2 I

Language Selection (VCR) .......... 22

On-Screen Status Displays (VCR) . .23

Description of Controls

DVD/VCR Display - DVD Features . .24

DVD/VCR Display -VCR Features...25

Front Panel ..................... 26

Rear Panel ...................... 27

Remote Control Buttons ........ 28-31

Basic VCR Operations

Playing aVideo Cassette Tape ....... 32

Recording on aVideo Cassette Tape . .33

VCR Recording

Recording One Channel/VVatching

Another ....................... 34

One-Touch Recording ............. 35

Timer Recording .............. 36-39

Rerecording (Tape Duplication) ...... 40

Video Cassette Tape Playback

Repeat Play (Video Cassette Tapes) ...41

Real-Time Counter Memory ........ 42

Time Search .................... 43

Special Effects Playback ............ 44

Automatic Operation Features ...... 45

Additional VCR Features

MTS System .................. 46-47

Hi-Fi Stereo Sound System ......... 48

Blue Background ................. 49

Disc Playback and Features

Playing a Disc ................... 50

Disc Menus ..................... 5 I

Pausing Playback ................. $2

Step by Step Playback/Slow Motion ...53

Fast Forward/Reverse Search ....... 54

Track Playback ................... 55

Title/Chapter Playback ............. 56

Specific Time Playback ............. 57

Repeat Playback (Discs) ............ 58

A-B Repeat Playback .............. 59

Programmed Playback ............. 60

Random Playback ................. 6 I

Audio Language/Sound Mode ....... 62

Subtitle Language ................. 63

Camera Angles .................. 64

Status Display (Discs) ............. 65

Parental Lock Levels .............. 66

Parental Lock Password ............ 67

DVD Player Setup and Features

Audio Settings ................ 68-69

Language Settings .............. 70-72

Video Settings ................... 73

Other Menu Settings .............. 74

Information You May Need

Care and Maintenance ............. 75

Helpful Hints ................. 76-79

Glossary ....................... 80

Specifications .................... 8 I

Limited Warranty ................ 82

Index .......................... 83

Accessories ..................... 84

Introduction5

• eo..ee..oo..o....J....oe,,eeeo,eet.,ot,.,ot,.eoeoQleee .e. • ogeoee.,,_eetteeo • • ...• ....o.oo•..etile,o.

Welcome!

This DVD/VCR combinesa DigitalVideo Disc (DVD) Playeranda Hi-FiVideo Cassette Recorder (VCR)into

one unit,allowing you to playDVDs,Audio Compact Discs(Audio CDs), and video cassettetapesfrom one pieceof equipment.The DVD Playerof this DVD/VCR wilt allow you to enjoy better picture quality,clearer sound,and endlessplaybackfeaturesavailableon DVDs.Expandingtechnology allows you to add options to

your viewing - watch adirector's cut of amovie,listen to the producer'scomments,or playyour favorite scene over and over again.Hear amovie in different languages,or listen only to the soundtrack.The possibilitiesare

limited only by your choicesand the materialsavailableon the DVD. When playingAudio CDs, determine the order in which you want to hear the songs,or playthe Discrepeated-

ly- all while seeingthe statusof the CD on your television. We hope you enjoy this DVD/VCR andlearn to use all of its features.Toget the most out of the DVD/VCR,

read this owner's manualcarefully.It will describe how you canaccessall the features listed below.

Features

• • • o ooo, • •

• Automatic Channel Setup

Automatic Head Cleaner

Automatic Operation Features Automatic Tracking Adjustment

Blue Background Daylig_t-SavlngsTime Hi-Fi Stereo Sound System High Quality (HQ) System MTS (Multi-Channel TelevisionSound) System

• 19 micron head

• On-Screen Displays in Englishor Spanish

• One-Touch Recording

• Real-Time Counter

• Repeat Play

• S-VHSQuasi PlayBack (SQPB)

• SpecialEffectsPlayback:Forward and Reverse Searching;Still; Slow Motion

• Time Search

• Timer Recording

•Audio Language/SoundMode Choices*

•Automatic Detection of DiscType (Audio CD or DVD)

• DVD Menus in aDesired Language*

• On-Screen Display

• Program Playback (Audio CD only)

• Random Playback (Audio CD only)

• Screen Saver

• Multiple Camera Angles*

• Subtitles in a Desired Language *

• Parental Lock*

• Paused/Fast/Slow/Step-by-StepPlayback

* If available on the Disc

When referring to this manual, remember...

Indicatesthat thefeaturedescribedisavailableonvideo cassettetapeswhenthe DVD/VCRisinVCRmode.

[_ Indicatesthat the feature describedisavailableon someDigitalVideo Discswhen the DVD/VCR isin

DVD mode.

IAUDIO O_ indicatesthat the feature describedisavailableon someAudio Compact Discswhen the

DVD/VCR isin DVD mode.

Disc Menus...

Someexplanations inthis manualare intendedto describe the Disc menus.Thesemenusare setbythe movie

producers or bythe music industry,andthe menuswill varyamongDiscs.Furthermore,not allDiscs areguaran- teed to havemenus.However.if the Disc hasa menu,you canaccessthe Disc menuby pressingthe DVD but-

ton, then pressingthe MENU button on the remote control. (Makesure the DVD/VCR is in DVD mode. Press the DVD/VCR OUTPUT button so that the red DVD light appearson the front of the DVD/VCR.)

DVD Menus... Someinstructionsexplainhow to use the DVD player'smenu to set up featuresof the DVD playeror the Disc.

Youget to the DVD playermenu by pressingthe SETUPbutton on the remote control when playbackis stopped.Evenif a feature isset upin the DVD player'smenu,it may not beavailableif the current Discdoes not

includethat feature.

Available Disc Features...

Not allof the featuresdescribed inthis manualmay beavailableon everyDVD or Audio CD. Ifthe

featureisnot availableonthe Disc,youcannotusethe DVD/VCR to makethesefeaturesavailable. The "No feature"symbolwillappearontheTV screenifyoutry to set up a feature that isnot

availableonthe current Discor isnot availableat the currenttime.

6 PlayableDiscs

oo ooeo ooeo,,e,Q***t i,oo ooQel • _et_ o**t • *O,OIWlOQOO •eoot t.O, • Iteo IOeOOt • OO**II OOtOl • • ooeott IBtOO*QO • • I_t.,*°,o,_ •

This DVD/VCR will play DigitalVideo Discs (DVDs) andAudio CDs. Inorder to playa

DVD or Audio CD on this DVD/VCR, makesurethe Disc meetsthe requirements for RegionCodes and Color Systemsasdescribedon this page.Also,the Discsshould be

labelledwith the following Iogosand should meet these standards.

Disc Type

Digital Video

Disc

Audio

Logo

DIGrr&L AUmO

Contents

Sound

and

Pictures

Sound

Disc Size

12 cm

8 cm

12cm

I 8crn

! (singles)

Maximum

Playback Time

Approx. 4 hours

(single-sided)

Approx. 8 hours

(double-sided)

Approx. 80 minutes

(single-sided)

Approx. 160minutes

(double-sided)

74minutes

20minutes

into numbered Tracks, i.e.,

a track may be one song.

Disc

Segments

DVDs are

divided into Titles,

which are divided

into Chapters.

Titles andChapters

are numbered.

Audio CDs are divided

Region Codes

DVDs alsomust belabelledfor ALL regionsor for Region I in order to be playedon

this DVD/VCR.You can not play Discsthat are labelledfor other regions.

Look for the symbolsbelow on your DVDs.If these region symbolsdo not appearon

your DVD,you cannot play the DVD in this DVD/VCR.

The numberinsidethe globerefers to a regionof the world. Region I representsthe United States,Canada,upper regionsof North America,Bermuda,the U.S.Virgin

Islands,and small regionsnearAustralia. A Disc encoded inaspecificregion format can only be playedon DVD playerswith the same regioncode.For example,ifa Disc is labelledfor Region2, you cannot play the

DVD on this DVD/VCR.

Color Systems

Different color systemsare availablethroughout the world.The most common color systemsare NTSC,which is usedprimarily in the United Statesand North America,

PAL,andSECAM. This DVD/VCR usesthe NTSC color system.Therefore,the Discs that you ptaymust

be recorded in the NTSC system.Youcannot playDiscsrecorded in other formats.The color systemof the DVD may belisted on the DVD or on the Disc jacket.

Unacceptable Discs The followingDiscs cannot be playedon this DVD/VCR.

• CD-ROM

• Compact Disc-interactive(CD-I)

• Compact Disc-I_ecordable(CD-R)

• DigitaIVideo Disc-VideoRecordable (DVD-VR)

The following discsmaybe played,but only the audio will be available.There will be

no picture.

• Compact Disc-Graphic(CD-G) • Compact Disc-Video(CD-V)

• DVD-RAM

• DVD-ROM

• Photo CD

• Video CD

• Video Single Disc (VSD)

o, • oto_ • _eQoo _oQi ooQo OOQQ • OeQOIOtQO JOOtg • • ttOOI IIOttQI OOtQOIg _OOQOO0 OOOt,O • ,_ • • ,0_ • _060 • _060 • • • _066° • • 000°IO •

Playable Video Cassette Tapes

This DVD/VCR isequippedwith a High Quality (HQ) systemandis compatible with existingVideoHome System(VHS) equipment.

PhilipsConsumer Electronicsrecommendsthat you useonly video cassettetapes which are labeledwith the _ mark.The useof

other tapesmay result inpoor picture qualityand excessivedeposits on the video heads,which maynot be coveredby the warranty if

damageoccurs.The 19micron head providesa better picture when you view tapesrecorded in slow speed(SLP).

Recording Prevention

Video cassettetapes haverecord tabs to ensurethat recordings are not accidentally erased.

To prevent recording, break off the tab with a screwdriver.

PlayableVideoCassetteTapes7

z z

To allow recording, cover the hole with cellophane tape.

DVD/VCR maintenance

• Use only tapes with the _ mark.

• Remove any light adhesivestick-on notes from the video cas- sette tape before putting the tape in the DVD/VCR. Removable

labelscan jam the DVD/VCR.

• Periodic maintenanceis required to maintainyour DVD/VCR's excellent performance.This DVD/VCR hasanAutomatic Head

Cleaner.However,the video headswill require replacement even- tually.Only an authorized service center should perform this set-

vice.

8 HookupsWithoutaCableBox/DirectBroadcastSystem

• • • • • • • • • •* • • • • • • • • • • • •• • • to • • • ••• • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • • • o• • • • • •• • • • • •• • • • • • •• • • • • •• • • • • • • • • • • • • • • • • •

The basic antenna/cable to DVD/VCR toTV is shown below.

If you have a Cable Box or a Direct Broadcast System, please see pages 10-1 I. For better sound and picture quality when using the DVD player, refer to the Optional Hookups on pages

12-14. After you hook up the DVD/VCR, go to page 16 to turn on the DVD/VCR.

Disconnect the antenna or cable from yourTV.

Antenna

Indoor/Outdoor

(300ohm)

I°°!

Jack

(on back of TV)

Cable

(75 ohm)

Connect the antenna or cable to the ANT-IN (Antenna In) Jack of your

DVD/VCR.

Antenna

IndoorlOutdoor

(300 ohm)

Back of DVD/VCR

Cable

(75 ohm)

HookupsWithoutaCableBox/DirectBroadcastSystem(cont'd)9

Connect the RF coaxial cable (supplied) to the ANT-IN (Antenna In) Jack on the back of the DVD/VCR and to the ANTENNA IN Jack on the'IV. (You may use

either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)

Antenna or Cable

RF coaxial cable

ANTENNA IN Jack

(on back of TV)

example only

Plug in theTV and the DVD/VCR.

Set the CH3/CH4 switch on the back of the DVD/VCR to CH3 or CH4, whichever channel is not used or least used in your area. Set theTV to the same

channel, For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV

should be on channel 03.

CH3 / CH4

Switch

CH3 CH4

You are ready to turn on the DVD/VCR. Please go to page 16 before turning on the DVD/VCR.

I0 HookupsWitha CableBox/DirectBroadcastSystem

• • •oe• • •oool ,oge• •o6•• •me•° .°tom eoo•• •ee• • i°•o ° °9• • ,e• • • to• • • •°tm • oe•• • •*•°o • w99oo • • ••• • ° .to• • ° t,• • ° • _••J • • • •el

There are two ways to connect your Cable Box/DBS to the DVD/VCR.With this connection:

• You may view any channel.

• You must select channels at the Cable Box/DBS. Channels cannot be changed at the DVD/VCR.

• You may not view a channel other than the one you are recording.

• You may not program channels at the DVD/VCR.

• You can only program a timer recording for one channel at a time. Set the TV and the DVD/VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your Cable Box/DBS to the channel you want to record.When you enter the channel you want to record in a timer

recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 37.) Leavethe Cable Box/DBS on for a timer recording.

Cable Box/DBS DVD/VCR

_"_O O O_ RF coaxial

Cable _,._, O O O , cable Signal

RF coaxial -_ ANTENNA IN

cable _ Jack

Connections

TV's

Connect a Cable signal to the IN Jackon the Cable Box/DBS.

Use an RFcoaxial cable (supplied) to connect the OUT Jackon the Cable

Box/DBS to the ANT-IN (Antenna In) Jackon the DVD/VCR.

Use asecond RFcoaxial cable to connect the ANT-OUT (Antenna Out) Jackon the DVD/VCR to the TV's ANTENNA IN Jack.

Recording/Viewing Any Channel

With the DVD/VCR on and inVCR position (the VCR light and the VCR/TV light will appearon the displaypanel), use the CHANNEL Air buttons to set

the DVD/VCR to the Cable Box/DBS output channel (channel 03 or

04). Set the CH3/CH4 switch to the same channel.

Set theTV to the same channel to which you set the DVDIVCR.

Select the channel you want to view/record at the Cable BoxlDBS.

• 06ttO6601*O60*OOIO601t601,O60,,O60*I66,110,,,t,OttOOOOOgOOgOOQOWOOOtOttO0*ItO ° tlglJ,,_et,16_Q,qg,,,O66t,_* ° me

With this connection:

• You maywatch one channel while recording another.

• You may not record scrambled channels. DVD/VCR

Cable Box/DBS

_LL

Cable

HookupsWitha CableBox/DirectBroadcastSystem(cont'd)II

Signal

_ __, _T r_L_

RF coaxial

cable

Connections

Connect a Cable signal to the DVD/VCR's ANT-IN (Antenna In)

Jack.

Use an RFcoaxial cable(supplied)to connect theANT-OUT

(Antenna Out) Jackon the DVD/VCR to the IN Jackon the Cable Box/DBS.

Use asecondRFcoaxial cableto connect the OUT Jackon the Cable Box/DBS to the ANTENNA IN Jackon the TM

Recording One ChannellWatching Another

Put the Cable Box/DBS on the same channel as the DVD/VCR's CH3/CH4 switch. Set the TV to the Cable

Box/DBS output channel (03 or 04).

Then, with the DVD/VCR in VCR position (the VCR light and the VCR/TV light will appear on the display panel),use the CHAN-

NEL A/v buttons to select the channel you want to record at the DVD/VCR. Start the recording.

TV's ANTENNA

IN Jack

Press the VCR/TV button once to put the DVD/VCR in TV

position, (The VCR/TV light will disappear.)

Select the channel you want to watch at the Cable Box/DBS.

When youplaya tape,makesure

the CableBoxlDBSisset to the

samechannelas the CH3/CH4 switchon the DVD/VCR.SettheTV

to theCable Box/DBSoutput channel(03 or 04).

12OptionalHookups

•, • J,o,, ,o,,. Jr, ,o, • o,i • o9,, • t66t • • .,0 • • • oft • ,,661, or,, • ,t6ot • • *t6o .oft • ,t66°, Jtt,t, • otto, ,•Boo6o,ott • tot_,,o,,

You may connect the DVD/VCR several different ways, dependingon your existing equipment and your prefer- ences for sound and picture quality.To determine which hookup is best for you, examine the options on the fol- lowing pages,then see which best matches your situation. Before you hook up the DVD/VCR, remember:

• Connect the DVD/VCR directly to aT_. If you connect the DVD/VCR to aVCR, then connect the VCR to the TV, the picture may be distorted by the copyright protection system.

• Turn off the power of all equipment before making any connections.

• Refer to the owner's manuals of your other equipment for additional information.

• Depending on your connection, you may need to purchase additional cables.

• When you use the DVD/VCR AUDIO anclVIDEO OUT jacks on the DVD/VCR, press the DVD/VCR OUT-

PUT button to selectVCR mode (or DVD mode).

Connecting the DVD/VCR to a Stereo TV

Otto,

Audio andVideo

IN Jackson TV

Video Cable

ANT-IN

Jack

Audio Cables

Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect the red and white audio cables (supplied) to the red and white DVD/VCRAUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the "IV, matching the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the

DVD/VCR's white DVD/VCR AUDIO OUT jack to the TV's AUDIO IN jack.You will not use the red audio

cable.

Connect the yellow video cable (supplied) to the DVD/VCRVIDEO OUT jack on the DVD/VCR

and to theVIDEO IN jack on theTV. Or, for better picturequality, connectanS-Video cable(not sup-

plied) to the S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV.Youwill not use

the supplied yellow video cable.

Connect theTV's power cord to a power outlet. Turn on theTV and set it to the Audio/Video In

channel, which also may be referred to asA/V In or Auxiliary In.Thischannel usually islocated near channel00.

See your'iV owner's manual for details.Or, if you used the S-Video cableat step 3, select the S-Video In channel at

your "i_ SeeyourTV owner's manual for details.

Connect the DVD/VCR's power cord to a power outlet, Press the POWER button, then press the

DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. "HELLO" will appear briefly on the DVD/VCR's display panel.Youshould see the DVD logo on theTV screen briefly.If you do not,

check your connections and make sure the'iV is set to the correct Audio/Video In channel. Ifthere is no disc

in the DVD/VCR,"no DISC" will appear on the displaypanel.

OptionalHookups(cont'd)13

Connectin_g to a TV and a Stereo

TV has Component Video In lacks

• Set DOLBY DIGITAL and DTSto OFF on the DVD/VCR. Detailsare onpages68-69.If you playa DVD when the settingsare wrong,the sound will bedistorted or you maydamagethe speakers.

DVD/VCR

COMPONENT

VIDEO IN

_ Cb/B-Y

_ Cr,ql-Y

BackofTV

(example only)

Back of Stereo

(example only)

Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect the red and white audio cables to the red and white DVD/VCRAUDIO OUT Jacks on

the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors

to the jack colors.

Connect an optional component video cable to the COMPONENTVIDEO OUT jacks on the

DVD/VCR and to the COMPONENTVIDEO IN jacks on theTV.

Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's Auxiliary IN station. During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner's manual for details,

Plug in theTV's power cord.Turn on the'iV and set it to the ComponentVideo In channel,which usually islocated near channel 00. DuringAudioCD playback,youmay checkthe statusofAudio CDs on

yourTV screen.DuringDVD playback,youwillwatch the programonthe T_.Seeyour"iV owners manualfor

details.

Connect the DVD/VCR's power cord to a power outlet. Press the POWER button, then press the DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. "HELLO" willappear

brieflyon the DVDNCR'S displaypanel.Youshouldseethe DVD logoon the'IV screenbriefly.Ifyou do not, checkyourconnectionsandmakesurethe'iV issetto the correctComponentVideoIn channel.If there isno discinthe DVDNCR,"no DISC" will appearonthe displaypanel.

14 OptionalHookups(cont'd)

• •oQ• •toot • ••,two•o• •oeo• • *eel •o,I ioeeo ••oee• • ito_tog iooeott.jo_,, • • .e••• • *..,•• o,_, • Io,•l *o_6.°. • o°.,•°o•° •, •

Some Discs are recorded in-a 5.1 channelE)olbyTPigitalSurround or DigitalTheater System (DT'S) Surround format.

These Discs will sound best if you connect the DVD/VCR to a Dolby Digital or DTS Decoder.

• You will need a coaxial digital audiocable or an audiooptical cable (not supplied). SeeHelpful Hints below.

• Ifyou use the OPTICAL jack, remove the protective cap.

• If you connect the DVD/VCR to a Dolby Digital Decoder, set DOLBY DIGITAL to ON. Details are on pages68-69.

• Ifyou connect the DVD/VCR to a DTS Decoder, set DTS to ON. Detailsare on pages68-69.

• If the DVD/VCR is not connected to a Dolby Digital or DTS decoder, set DOLBY DIGITAL and DTS to OFF. Incorrect settings may causenoise distortion and damage the speakers.

• Select the 5.1 channel Dolby Digital Surround sound in the Disc menu.

• Connect a subwoofer and the center, front, and surround speakers to the Decoder as described in the Decoder owner's manual.

• Ifthe Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound usinga Mini-

Disc or Digital AudioTape Deck.

Connectine to a Dolbv Digital Decoder, DTS Decoder, or Amplifier

0 1[:] o,,

_l o o _

DVD/VC

BackofTV 3 2

(example only)

Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect a coaxial digital audio cable (not supplied) to the COAXIAL jack on the DVD/VCR and to the COAXIAL DIGITAL AUDIO IN jack on the Decoder or Amplifier. (Or, you may connect an audio optical

cable (not supplied) to the OPTICAL jack on the DVD/VCR and to the OPTICAL DIGtTALAUDIO IN jack on the

Decoder or Amplifier.)

Back of Decoder

(example only)

Connect the supplied yellow video cable to the yellow DVD/VCRVIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. (Or, you may connect a component video cable or a S-Videocable.Detai/s

areon pages12-13.)

Plug in the power cord of the Decoder or Amplifier.Turn on the Decoder or Amplifier and select its Auxiliary IN station. During

Disc playback,you will adjust the volumeat the Decoder or Amplifier. See

its owner'smanual for details.

Plug in the'rV's power cord.Turn on theTV and set it to the cor-

rectVideo In channel. During Audio CD playback,you may check the Disc status on your'iV screen.During DVD playback,you will watch the

program on theT_ See yourTV owner's manualfor details.

Connect the DVD/VCR's power cord to a power outlet. Press the POWER button, then press the DVD/VCR OUTPUT button so

that the DVD light appears on the DVD/VCR. "HELLO" will appear

brieflyon the DVD/VCR'S displaypanel.Youshould seethe DVD logo on

the'iV screen briefly.Ifyou do not,check your connections and makesure the'IV is set to the correctVideo in channel. Ifthere is no discin the

DVD/VCR,"no DISC" will appear on the displaypanel.

Optical cable may be

damaged when bent at acute angles.

Ensurecablesare coiled in loops with a

diameter of 6 inches or more when storing them.

Use a cable which is 9.8 feet or

shorter.

Insert cable plugs firmlyinto the

jacks when making connections.

If a plug has minor scratchesor is dirty,clean it with a soft cloth before inserting it into ajack. Replacethe protective cap onthe

OPTICALjack when it is not in

use.

• ooooo ooeQ, o,eQo,,eoo e,eo,,,t et, too, • t oet.t •or, t 6et,ooo • Io6o,, I °° • ° • • o•••• Joot,eooooooeoooooo_t••ol o° ••_o• o° ,oo

Putting_ Batteries in the Remote Control __

Remove the battery compartment lid on the bottom of the

remote control bypressingthe tab, then likingthe lid.

RemoteControlSetup15

Place two AA batteries inside the battery compartment with their +and- endsalignedasindicated.

Replace the battery compartment lid.

Using the Remote Control

• Poirit the remote control at the DVD/VCR's remote sensor (see

page26) when using the remote control to operate the DVD/VCR.

• Do not put objects between the remote control and the DVD/VCR.

Recycling Guidelines/Battery Safety

Your new product and itspackagingcontain materialsthat can be recycledand reused.Specializedcompaniescan recycle your product

to increasethe amount that needsto be properly disposed. Your product usesbatteries that should not be thrown awaywhen depleted but should be disposedof assmallchemicalwaste.Please find out about the local regulationson disposalof your old product, batteries,and packagingwhenever you replaceexisting equipment.

The remote control and its batter- ies are supplied.

Do nat mix alkaline and man-

ganese batteries.

Do not mix old and new batteries.

16TurningonYourDVD/VCR

Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly.

• You can not program channels if you are using a Cable Box or a

Direct Broadcast System.

Press the VCR button, then press the POWER button.

"HELLO" will appear briefly on the front of the DVD/VCR.TheVCR

light, theVCR/TV _ight,and the POWER light will appear on the front

of the DVD/VCR.

Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the DVD/VCR. The displayshown below

will appear. (If the display does not appear, check your hookups, then follow the steps on page 17to set up channelsand page 22 to select a language.)

-_ ENGLISH ON _SPANOL

MAKE SELECTION OR

USH MENU TO CONTINUE

Within 60 seconds, press the PLAY button or the STOP but- ton to select English or Spanish on-screen displays and

menus.

Turn on the T_.

ocuoU

SPEED

OCDO

ocuo

C300

_ _ --_E_S TITLE 4

Press the MENU button.

TO VCP,

THEN.

PUSH CH UP KEY

OR.

_CCONNECT ANTENNA OR CABLE 1

FOP, pLAy ONLY - PUSH STOP

Within 60 seconds, press the CHANNEL A button to begin automatic channel programming. AUTO CH PROGRAMMING

IN PROCESS PLEASEWAIT will appear on the'IV screen.The

DVD/VCR will memorize all availablechannels.When all channels are

memorized, CHANNELS ARE SET will appear on the screen briefly, then TV programming will appear. These channels will be availablewhen you want to watch TV while in

VCR mode.To put the DVD/VCR inVCR mode, press the DVD/VCR OUTPUT button so that theVCR light appears.Then press the

VCR/TV button so that theVCR/TV light appears. Press theVCR but- ton, then use the CHANNEL and Number buttons to select aTV

channel for viewing.

Helpful Hints

Toskip this feature and play a tape

immediately,insert a tape with its record tab removed.Or, to skip step 3,press the MENU button.All on-

screen displays will be in English.To

skip step 5, press the STOPbutton.

Channelswill not be programmed, and CHANNELS NOT SETwill

appear on the screen. If you try to program channels when

there is no antenna or cable con- nected to the DVD/VCR.program-

ming will appear to take place,but eventuallya NO TVSIGNALSmes-

sage will appear. Connect ananten-

na or cable to the DVD/VCR'sANT- IN (Antenna In)jack and press the

CHANNEL A button again.If chan- nel programming does not resume,

you may need to follow the steps on page 17.

You may need to repeat the steps

on this page if a power failure

OCcurs.

Although your DVD/VCR may automatically memorize the chan-

nelsyou receive when you turn it on for the first time, this func-

tion lets you set up the channels again.

• Before you begin,placethe DVD/VCR inVCR mode. Pressthe DVD/VCR OUTPUT button sothat the greenVCR light appears

on the front of the DVD/VCR. PresstheVCP,/TV button so that theVCR/-rv lightappears on the front of the DVD/VCR.

Press theVCR button, then press the MENU button.

> PROGRAM

VCR SET UP TUNER SET UP

SET CLOCK

O END PUSH EXIT

Press the PLAY button or the STOP button to select TUNER SET UP, then

SELECT a,v CHOOSE I_

AUTO PROGRAMMING ADDIDELETE CH CH MEMORY REVIEW TV STEREO ON 2ND AUDIO

O END PUSH EXiT

,ress the F.FWD button.

Press the PLAY button or the STOP button to select AUTO

PROGRAMMING, then press the F.FWD button. The

DVD/VCR will memorize all the channelsyou receive.

AUTO CH PROGRAMMING

IN PROCESS

PLEASEWAIT

Q ©

owvcA

v_lv OUTFIT MEMORY

C_ CZ_ CZ_

DVD VC_

CD CDCD

oo.....6 0

000

PHILIPS

-I

START FINISH

IIIIIIIIII

IIIIIIIIIII/

Wait for a few minutes while the DVD/VCR sets up the

channels. When this is complete, CHANNELS ARE SETwill

appearon the screen.Then the programmingof the lowest channel

number placedin the DVD/VCR's memory will appearon the screen.Now when you pressthe CHANNEL _/_ buttons,you

will scanonly throughchannelsyou receive.

Helpful H|n_

Youcan nat enter the TUNER SET

UP menu when youare in !3ne Input made (channel 001 ar 002).

When you select channel 001 or 002,AV REARor AVFRONT will

appear on the screen briefly.

Youcan not program channels if you

are using a Cable Box or DBS.

If you have an antenna, channels 2- 69 will be available.If you have a cable conne_on, channels 1-125

will be available.

Adding/Deleting Channels

• Before you begin,placethe DVD/VCR inVCR mode.Pressthe DVD/VCR OUTPUT button so that the greenVCR light appears

on the front of the DVD/VCR. PresstheVCR/TV button so that theVCR/TV light appearson the front of the DVDNCR.

Press the VCR button, then press the MENU button.

PROGRAM VCR SET UP TUNEP, SET UP SET CLOCK

SI!T'LECT Av CHOOSE I1_

O END PUSH EXIT

f{_ r_MEnSET'_

(D O

vc_Tv c_lr_r ME_

(2ZD C_ (2_D

_vD _

Press the PLAY button or the STOP button to select

TUI_ER SET UP, then press the F,FWD button.

Press the PLAY button or the STOP button to select

ADD/DELETE CH, then press the F.FWD button.

124 DELETED 125 DELETED

I _-_ DELETED

2 ADOEO 3 ADDED

SII_LECT_- ADDJDELETEP" 1

O END PUSH EXIT

NOT_ If you have an antenna, channel numbers 2-69 will appear on

the ADD/DELETECH menu.If youhave acableconnection,channelsI-

125 willbe available.

Press the PLAY button or the STOP button until the channel number you want to add or delete appears beside

the arrow.

C_ El CD 0

SP_EO

CDC_3C3

J_JED CD

0 0 '0"'0_'0

PHILIPS

_-."To_SELECTEND201918_I67A_PUSH._ADO/DELETEExITADDEDADDEDADDEDADDEDDELETEDll- 1

Press the F.FWD button to select ADDED or DELETED. Repeatsteps4 and 5 until you haveaddedor deletedall the chan-

nelsyou wanted to add or delete.

Press the DISPLAYISTATUS/EXIT button.

AutomaticChannelSetup(cont'd)19

• • .o.o • _Qo • • to • _oQo • ooo • • _ooo • _tQo • _.o • o._o • • ttJ* • Jottll • • ooooo • • • _oooo • • ooooo., • _.oo • i.°o • Ioo... o_ooom • • • • _a°

Reviewing Memorized Channels

• Before you begin, place the DVD/VCR inVCR mode. Press the

DVD/VCR OUTPUT button so that the green VCR light appears

on the front of the DVD/VCR. Press theVCR/TV button so that theVCR/TV light appears on the front of the DVD/VCR.

Press the VCR button, then press the MENU button.

PROGRAM _ I

VCR SET UP

TUNER SET UP

SET CLOCK

SIT LECT _'v CHOOSE I1_ 1

O END PUSH EXIT

Press the PLAY button or the STOP button to select TUNER SET UP, then press the F.FWD button.

Sf S LECT _,_ CHOOSE I_

AUTO PROGRAMMING ADD/DELETE CH CH MEMORY REVIEW

TV STEREO ON

2ND AUOIO

O END PUSH EXIT

Press the PLAY button or the STOP button to select CH MEMORY REVIEW, then press the F,FWO button. A list of

memorized channelswill appear on the screen.

• If all the memorized channelsdon't fit on the screen, press the EF_/D button to see the remaining channels.Then press the

REW(ind) button to return to the first screen of channels.

• If you do not press any buttons within 10 seconds,you will either

go to the next screen of channels or you will return to the previ-

ous menu.

Press the DISPLAY/STATUS/EXIT button once or twice

to exit.

PHILIPS

20 SettingtheClock

Follow the steps below to set the clock for the VCR. Makesure:

• The DVD/VCR is on and theVCR/TV light appearson the dis- play panel.(If it does not, pressthe VCR/TV button once.)

• You make each entry within 60 secondsof the previous entry.

• Before you begin,placethe DVD/VCR inVCR mode.Pressthe

DVD/VCR OUTPUT button so that the greenVCR light appears

on the front of the DVD/VCR. PresstheVCR/TV button so that theVCR/TV light appearson the front of the DVD/VCR.

Press the VCR button, then press the MENU button.

Press the PLAY button or the STOP button to select SET CLOCK, then press the F.FWD button.

Press the PLAY button or the STOP button to select SET

CLOCK, then press the F.FWD button.

DATE - - / - - / -

I TIME - - :-

TO END PUSH EXiT

4-5 2-3

_ poo 0

E] CZ)CZ3

C_ CZ3CZ)....

oo.....6 0

_o ......

c_i:_ _,_ _

_ CD,

_0 00""Ot 0'_

_ RE_URN

PHILIPS

Press two Number buttons for the hour(s) and two Number buttons for the minute(s).Then press I forAM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.

MONTH / - - / -=

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

Press two Number buttons for the month, two Number

buttons for the day, and two Number buttons for the year.

For example, for July I, 2000, press07,0 I,00.The day of the week

will appear automatically.

DATE 07101 /00

SAT

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

Press the DISPLAYISTATUS/EXIT button.

Entera 0 beforea stngle-digitnumber. Entriesthat donotmatchthe

DVDIVCR'sclockorcalendarwill causea questionmarktoappearon

the screen.

Tomakecorrec'dons,presstheCLEAR

buttonuntilthespaceforthenumber youwantto correctisflashing.Then

enterthecorrectnumber.

Toseethe currenttimeontheTV

screen,presstheDISPLAY/STATUS/ EXITbutton.Detailsareonpage23.

Powerfailuresthatlastfor morethan

oneminutecancauseyouto lose yourclocksetting.

Daylight.SavingsTime21

Ilot • oooeeBoQi OQQO OIIOOt0601 *.t0 * JttQ • O01_ 0006011660t IOOQ_ 0060 • 066O • .trio • .06°°° • O..O_ • .,01 • ..61° 1.0_,00. • • ..O0

You mayprogram the DVD/VCR so theVCR clock will automati- cally move forward one hour inApril and turn back one hour in

October. Daylight-SavingsTime is set to ON when you receive your DVD/VCR.Turn Daylight-SavingsTime ON or OFF by follow-

ing the steps below. Before you begin:

• Make sure the clock is set.

• Beforeyou begin,placethe DVD/VCR inVCR mode, Pressthe DVD/VCR OUTPUT button so that the greenVCR light appears

on the front of the DVD/VCR. PresstheVCR/TV button so that theVCR/TV light appearson the front of the DVD/VCR.

Press the VCR button, then press the MENU button,

PROGRAM VCR SET UP TUNER SET UP SET CLOCK

SIST LECT Av CHOOSE _- 1

O EN_PUSH EXIT

Press the PLAY button or the STOP button to select SET

CLOCK, then press the F.FWD button.

SET CLOCK DAYUGHT SVGTIME [ON]

I SETCLOCK 1

SELECT Av CHOOSE b

O END PUSH EXIT

Press the PLAY button or the STOP button to select

DAYLIGHT SVG TIME.Then, press the E.FWD button so

that OFF (or ON) appears beside DAYLIGHT SVG TIME.

SET CLOCK DAYLIGHT SVG TIME {ON]

_ST SETCLOCK 1

SELECT A_ CHOOSE I _

O END PUSH EXIT

Press the DISPLAY/STATUSIEXIT button.

PHILIPS

22 LanguageSelection(VCR)

Follow the steps below to changethe languageof the VCR on- screen displaysand menus.

• Before you begin,placethe DVD/VCR inVCR mode.Pressthe

DVD/VCR OUTPUT button so that the greenVCR light appears on the front of the DVD/VCR. PresstheVCR/TV button so that

theVCR/TV light appearson the front of the DVD/VCR.

T_ERSET

O O

Dvovc_

Press theVCR button, then press the MENU button.

PROGRAM

VCR SET UP TUNER SET UP

SET CLOCK

SIST LECT _,v CHOOSE I_ 1

O END PUSH EXIT

Pre_s the PLAY button or the STOP button to selectVCR

SET UP, then press the F.FWD button.

REPEATPLAY OFF ON SCREEN MODE AUDIO OUT LANGUAGE BLUE BACKGROUND ON

STELEC T A" CHOOSE ID, 1

O END PUSH EXIT

Press the PLAY button or the STOP button to select

LANGUAGE, then press the F.FWD button.

ESPANOL

OVD vcn

_NTE_ _ET_

PHILIPS

_wJ

-I

SELECT Av 1_ISo _NGL_IsH ON

MAKE SELECTION OR

END PUSH EXIT

Press the PLAY button or the STOP button to select English or Spanish (ESPAl_OL)on-screen displays and

menns,

Press the DISPLAY/STATUS/EXIT button.

Helpful Hint

• If you accidentally select Spanish and need English:

I. Pressthe VCRbutton, then press the

MENU button.

2. Pressthe PLAYbutton or the STOP button to select PREPAREELVCR,

then pressthe EFWD button.

3. Pressthe PLAYbutton or the STOP button to select LENGUAJE,then

pressthe EFWD button.

4. Pressthe PLAYbutton or the STOP button to select ENGLISH.

5. Pressthe DISPLAY/STATUS/EXIT button.

On-ScreenStatusDisplays(VCR)23

• • •o••• • o•• • rio• •1•• too• • ••• • ••1 • OQQ • OOOOI OOtOO IOtOOg • •tOOl Jot• • ••111• • • II1•• • tot • •IOO•OOO,• •,,Q••• •IOtQ••tQ••,

A status display will appear when you press the DISPLAY/STATUS/EXIT button or certain function buttons.The con-

tents of the status display will vary.To choose the status display mode, follow the steps below.

• Before you begin, place the DVD/VCR inVCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears

on the front of the DVD/VCR. Press theVCR/-rv button so that theVCPdTV light appears on the front of the DVD/VCR. Receiving and Recording Mode

If you select STATUS ON, then select COUNTER ONLY ON: Channel

_ Whenever you press the STOP button or the PLAY button, the Current status

status display will appear for five seconds.After five seconds, only of tape Time the counter will remain on the screen.You must press the DIS- I I

PLAY/STATUS/EXIT button to remove it. Portions of the status f I I

display also may appear when you press other function buttons. (STOP 12:00AM

If you select STATUS ON, then select COUNTER ONLY TI TV STEREO-- CHI0 --

@Whenever you press the STOP button or the PLAY button, the

status display will appear for five seconds. Portions of the status P 1:23:45 HIFI display also may appear when you press other function buttons.

OFF: _L STEREO

If youcselect STATUS OFF: _ The status display will not appear when you press function but-

tons.You must press the DISPLAY/STATUS/EXIT button to see the Tape Counter Audio Out Mode status display. Speed and

2ND AUD

Pressthe MENU button.

Press the PLAY button or the STOP button to select VCR SET UP, then press the F.FWD button.

Press the PLAY button or the STOP button to select ON SCREEN MODE, then press the F.FWD button.

Press the PLAY button or the STOP button to select STA-

TUS, then press the F.FWD button so that OFF (or ON) appears beside STATUS.

Sf S LECT Av CHOOSE ll_

STATUS COUNTER ONLY

O END PUSH EXIT

[OFF]

ION] 1

If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press the PLAY button or the STOP button to select

COUNTER ONLY, then press the F.FWD button so that OFF (or ON) appears beside it.

Press the DISPLAYISTATUSIEXIT button.

Memory

Counter

MTS Broadcast

Available

Hempful

Youmay not accessa status display

when viewing a stJIIpicture, during slow motJonplayback, or during for-

ward or reverse searching.

The status display may not appear if

a weak channel is selectedand

BLUE BACKGROUND is set to OFF. Details are on page 49.

24 DVD/VCRDisplay- DVDFeatures

Display

Messages about current DVD operations appear here. See Display Messages below.

DVD Light (red)

This lightappearswhen the DVD/VCR is in DVD mode.Youcanonly watch DVDs when the DVD light is on.To makethe DVD light comeon, pressthe OUTPUT button on the front of the DVD/VCR.

€--

Ill ....... !!

pHIULIS _--_ _ 1

Disc loading tray /

Insert a Disc here.

Lit w_hena DVD is -'-'--I inserted.When the l

DVD light is on,the l disc is loaded completely I r _. _

POWER Light \ This Light appearswhen the

power is on.

andisreadyforplayback.Litwhen an Audio CD-___ _ _ Qz_I 10_=_c0_ _°0_]___ _0 0D_(J0__ _D_Jc_-_"0_]c0_0_ill,....numberD'Sp!ays(DVD)atitle

isinserted.When the Displaysa chapter (DVD) CD light is on,the disc is or track (Audio CD) number Displaysthe elapsedtime loaded completely and is of the current title (DVD)

ready for playback, or track (Audio CD)

Display Messages

!JCl ii-i

I I t8 I_ I_ I_1 Power isturning on.

I"I I--I I-- Appears after the disctray closesif the tray '1'_1 il IS'-- ,sempty.

|"I 0|---- |"I Trayis openingor is open.

U| Lll

I_I |"I C C Tray is closing.

LL! --*L-

_'! I1_ I.. ! ! to searchfor the next or previous chapter/track.

|_! OO t" !..I Appears briefly when you pressthe SKIPbuttons

il ':IE Power isturning off.

| |"It! T| Disc is

I_ I.,l I I 11

PHILIPS

uluu _

DVD/VCRDisplay.VCRFeatures25

Cassette Compartment Insert a tape here.

o II ....... I

VCR Light (Green) This lightappearswhen the DVDNCR

isinVCR mode.You canonlywatch

tapes when theVCR light is on.To

make theVCR light come on, press the

OUTPUT button on the front of the

DVD/VCR.

TIMER SET Light

This light glows when the DVD/VCR is in stand-

by mode or off for a timer recording or during a One-Touch Recording. It flashes if the TIMER

SET button is pressed for a timer recording, but there is no tape in the DVD/VCR. It flashes

when all timer recordings or One-Touch

Recordings are finished.

_IICOIIRD LightIfi _*_

This light appears during a recording• It flashes when a recording is paused•

r_E,

POWER Light This light appears when the power

is on.

CST. IN (Cassette- Inside) Light

This lightappearswhen a tape is in the DVD/VCR.

VCR/TV Light

This light appears when the DVD/VCR is in VCR posi-

tion.This light does not

appear when the DVD/VCR

is in"IV position.

26 FrontPanel

POWER Button

Press to turn the power on and off.

TIMER SET Button

Press to put the DVD/VCR into standby mode for a timer recording. Details are on page 38.

CHANNEL Buttons

InVCR mode, press to change channelsat the DVD/VCR. Or, press to adjustthe tracking of a tape during normal playback or slow motion playback.Also, press to remove vertical jitter in a Stillpicture. Details are on page 45.

RECORD Button Press once to start a recording. Press repeatedly to start a One-Touch Recording.

Details are on page 35. PLAY Button

Press to play a tape. Press to release Slow, Search, or Still mode and return to tape playback. Details are on page 44. Press to select an item in theVCR menu.

Remote Sensor

Receives a signal from your remlbte control so you can operate your DVD/VCR

from a distance.

PHILIPS

0'Dn'LI_ nNu I Uu I ,.C3.q_

133.ir

SEARCH Buttons

Press for a fast forward or reverse search during Disc play-

back. Details are on page 54.

I I

PLAY Button

Press to start or

resume Disc playback. Detailsare on page50.

OUTPUT Button -

OPENICLOSE Button Press to open or close the Disc tray.

Details are on page 50.

Pressto select DVD mode

orVCR mode.

STOP/EJECT Button

STOP Button

Press to stop Disc playback. Details are on page 50.

REW(ind) Button

When tape playback is stopped, press to rewind the tape at high speed. During

playback,press to rewind the tape while the picture stayson the screen. Details

are on page 44. Press to return to a previousVCR menu.

AUDIO In Jacks

Connect audio cables coming from the audio out jacks of a cam- corder, anotherVCR, or an audio source here. Details are onpage 40.

Pressonceto stop the tape. When playbackisstopped,press to eject the tape.Pressto select

an item in theVCR menu.

F.FWD (Fast

Forward) Button

When tape playback is

stopped, press to fast

forward the tape at high

speed. During tape play- back, press to fast for-

ward the tape while the picture stays on the

screen. Details are on page 44. Press to

advance to the next VCR menu or to

change the setting of an item in theVCR menu.

VIDEO In Jack

Connect a video cable coming from the video out jack of a camcorder, another VCR, or

a video source (laser disc player, video disc player, etc.) here. Details are on page 40.

+ 58 hidden pages