Philips DLM1358-17 User Manual

Philips Full-cover case

for iPhone 4

DLM1358

Protect iPhone from the elements

in a full-cover, touch-through case

Interlocking silicone and polycarbonate provide 360-degree coverage for maximum protection and minimal bulk. Enjoy full use of iPhone while protected in the case, including covers for the headphone jack and dock connector when not in use.

Extreme protection

• Dual-material construction provides strength + grip

• Interlocking 360-degree design for all-over coverage

• Silicone plugs seal openings when not in use

• Covered buttons for push-through protection

Protection on the go

• Slim design fits easily into your pocket

• Protection in a snap

Screen protection

• Touch-through silicone for access while protected

Full-cover case

for iPhone 4

DLM1358/17

Specifications

Compatibility

• Compatible with: iPhone

Design and finishing

• Color(s): See-through

• Materials: Silicone & Polycarbonate

Packaging dimensions

• Packaging type: Box

• Number of products included: 1

• Packaging dimensions (W x H x D):

5.0 x 7.0 x 1.0 inch

• Gross weight: 0.201 lb

• Nett weight: 0.099 lb

• Tare weight: 0.101 lb

• UPC: 6 09585 19393 2

Outer Carton

• Number of consumer packagings: 18

•Outer carton (L x W x H): 12.8 x 11.3 x 7.3 inch

• Gross weight: 3.858 lb

• Nett weight: 1.786 lb

• Tare weight: 2.072 lb

• GTIN: 2 06 09585 19393 6

Inner Carton

• Number of consumer packagings: 3

• Inner carton (L x W x H): 7.0 x 5.4 x 3.7 inch

• Gross weight: 0.639 lb

• Nett weight: 0.298 lb

• Tare weight: 0.342 lb

• GTIN: 1 06 09585 19393 9

•

Highlights

Covered buttons for protection

The case material covers the volume buttons, giving you push-through control while your device stays protected.

Dual-material construction

Two materials combine for even better protection. Made from an outer layer of durable see-through silicone that adds secure grip, plus a backbone of strong, crystal-clear polycarbonate that seals the case closed.

Interlocking 360-degree design

Constructed of silicone and polycarbonate, the twopart case features an advanced seal to provide total, 360-degree coverage, protecting your device from the elements when you need it most.

Silicone plugs seal openings

Integrated silicone plugs seal the headphone jack and connector port for protection against the elements when not in use.

Touch-through silicone

You can see your device's display through the silicone face of the case. Plus, the silicone is touch sensitive, allowing touch-through control of your device for full functionality while protected inside the case.

Issue date 2014-03-14

Version: 2.1.2

12 NC: 8670 000 66625 UPC: 6 09585 19393 2

Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

www.philips.com