Philips DECT7272S/05, DECT7271S/05, DECT7271S, DECT7272S, DECT723 User Manual

...

Download

Quick start guide

Press the Right soft key (RSK) to access the Phonebook in idle mode and press the LSK

to VIEW the details.

Quick start guide / understanding the menu system

Answer / end a call

Make a call

Redial a number

Call from phonebook

Add a name to the phonebook

Adjust the earpiece volume during a call

Adjust the handset loudspeaker volume

Mute and unmute the microphone

Activate/deactivate the answer machine

(only

DECT 727, see page 49-50)

Set the date and time

Set the handset ring tone

Predial number & or and dial number

Press and browse and

Press RSK and browse and

Predial number and press the LSK to select SAVE, enter the

name and press OK

Scroll up to increase the volume, scroll down to decrease

the volume

During a handsfree call, Up to increase, Down to decrease

During a call press LSK MUTE, press LSK again to select

UNMUTE

Press the LSK to enter the menu list, scroll to Persona-

lize and press SELECT, scroll to Handset Tones and press

SELECT. Scroll to HS Ringtone and press SELECT. Browse

through the list to hear the ring tones and select your

chosen ring tone.

Press the LSK to enter the menu list, scroll to

Personalize, press to select Clock & Alarm, press to select

Date & time. Enter the current time (HH:MM), then the current day

(DD/MM) and press SELECT.

Press on the base station to switch the answer machine ON/OFF

Press the Left soft key (LSK) to enter the main menu in idle mode. Use the Navigation keys

to go up or down in the menu list or to navigate within the lists. Press the LSK to select

the menu or an option and validate a setting.

Read Call log

Press , scroll to select Call log or SMS and browse

A short press on one of the soft keys confirms the text function described above these keys.

Press the Up Navigation key to access the Redial list in idle mode and press the Down

Navigation key to access the Call log.

DECT 723 / DECT 727 handset

Colour Display

Headline : shows icons and current menu operation. Soft key line : shows contextual menus.

Earpiece

Loudspeaker*

- Short press to take the line and to activate the handset loudspeaker during a call.

Keypad lock & insert

- Short press to insert

- Long press to lock/unlock the keypad in idle mode.

Case mode & insert #

- Short press to insert #.

- Press to change case mode when editing.

- Long press to insert a pause (P) when dialling.

Intercom / Call transfer

- Short press to initiate an internal call.

- Short press during internal call to transfer the call or switch between internal call and external call.

- Short press to answer an internal call.

Right soft key

- Short press to access the Phonebook from idle mode.

- Short press to exit contextual menu.

DECT 723/DECT 727 Handset

Pick-up & Recall key

- Press to take the line and answer a call.

- To insert R for operator services when on line.

Hang-up key

- A short press to hang-up the line or to exit (return to idle mode).

- A long press to power off the handset.

Left soft key

- In idle mode, short press to access the main menu.

- Short press to select contextual menu.

Navigation keys

Scroll to move through the

menus & options.

Scroll up to access the Redial

list from idle mode.

Scroll down to access the Call log/SMS messages from idle mode.

*Warning : Handsfree activation could suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

Microphone

Icons on the handset & base display

Icons on the handset display

The display gives information about the operation of your telephone.A total of 9 icons can be shown in the headline of the display :

When charging, the battery bars scroll from empty to full status. When the handset discharges, the battery shows the status : Full , 2/3 , 1/3 and empty

When being used for the first time, it is sometimes necessary to wait until the battery is sufficiently charged before the icons appear on the display.

The handset is registered and in range of the base. When blinking, this symbol indicates that the handset is not registered to the base or out of range.

The ringtone is deactivated.

The alarm clock is activated.

An external call is in progress. When blinking, this symbol indicates that there is an incoming external call in progress or that the line is already busy.

An internal call is in progress. When blinking, this symbol indicates that there is an incoming internal call.

The keypad is locked.

The handset loudspeaker is activated.

Icons on the base display

only DECT 727

The remote access code is activated.

New unread message(s) on answer machine.

Old message(s) on answer machine, already read.

The answer machine is ON.

Indicates the type of outgoing message that is used.

Indicates the number of rings before the answer machine will start playing the outgoing message.

Call screening ON/OFF

The display of the base DECT 727 gives information about the answer machine and the settings.

Date (DD / MM)

Time (HH : MM )

Number of messages

New message(s) (SMS, call log entry or voice mail).

DECT 723 & DECT 727 base station

Paging key

The paging key enables you to locate a missing handset if the handset is in range and has charged batteries. Press the key until the handset starts to ring. Once retrieved, press key on the handset to end paging.

DECT 723 base station

DECT 727 base station

Record Memo &

Outgoing messages

Short press to record a

memo.

Long press to record outgoing

message 1 or 2 (see page 52).

Skip forward / Next

message

Short press to go to the next

message while listening.

ON/OFF key

Press to switch the answer machine ON or OFF

Play / Stop key

Short press to play message. Short press to stop playback while listening to a message. Long press to enter answer machine setting mode.

Paging key

Press to locate all handsets.

Loudspeaker

Skip back / Replay key

If pressed within 1 second of message playback : Skip to previous message. If pressed after 1 second of message playback : Replay current message.

/ Volume keys

To adjust the base volume level

Backlight will be ON when there are new answer machine messages or answer machine memory is full. Icons see page 3

Delete key

Short press to delete the

current message during

playback.

Long press in idle mode to

delete all messages (with all

messages have been read).

SIMcard tray

setting/ ok

Table of contents

Quick start guide 1

DECT 723 / DECT 727 handset 2

Icons on the handset display 3 Icons on the base DECT 727 3

DECT 723 / DECT 727 base station 4

Table of contents 5-6

Menu structure 7-9 Contextual soft key labels 9

Conformity, environment and safety 10

Declaration of conformity

Using GAP standard compliance 11

Installing the DECT 723/727

Unpacking your DECT 723/727 12 Installing the base station 13 Installing and replacing the batteries in the handset 13 Battery life and range 13

Configuration mode 14 Handset power Off/On and keypad lock/unlock 14

Introduction

Idle mode 15 Understanding the menu system 15

Basic principles 16

In-call features 17

Editing system 18

SMS

Write and send new SMS 19 View SMS 20 Inbox 21 Outbox 22 Draft folder 24 SMS settings 25

Phonebook

Group ring tone 26 New entry 26 View 27 Copy from SIM 30

Table of contents

Call log

View 31 Store a number in the phonebook 31 Delete all 32

Redial list

View 33 Store a number in the phonebook 33 Delete all 34

Intercom

Internal call 35 Call transfer 35 Conference call 36

Personalize

Clock & Alarm 37 To set the date and time 37 To set the alarm clock 37 Language 38 Wallpaper 38 Contrast 39 Handset tones 39 Handset name 41 Auto answer 41 Room Monitor 42

Advance settings

Dial mode 43 Flash time 43 Voice language (only DECT 727) 44 Security 44 Registration 45 Unregistration 45 Reset 45

Network service (operator services) 46

Games 47

Answer machine DECT 727

Keys 48 Display 49 Saved messages 49 Delete answer machine messages 50 Answer machine settings 50 Outgoing messages 52 Record and listen to a memo 53 Remote control 54

Default settings 54

FAQ 55-56 Troubleshooting 57-58 Index 59

Menu structure

SMS

Write a SMS

Edit

Save Number

Delete

Delete all

Inbox

SMS Settings

SMS

SMS Center 1

SMS Center 2

Menu structure

Animated main menu icons

From idle mode, to enter the menu, press the Left soft key (LSK) MENU. Use the

Navigation keys to go up or down in the menu list.

Outbox

Fax*

Email*

Resend

Save as Draft

Delete

Delete all

Edit

Draft

Send

Delete

Delete all

Edit

SMS Center 3

Default Center

Select SMS center

Phonebook

List Entry

Edit Entry

Delete All

New Entry

Delete Entry

List of names

Enter name

List of names

Copy from SIM

*Country dependent feature

Menu structure

Level 1/2/3/Silence

Melody names

On / Off

Personalize

Clock & Alarm

Handset Tones

Handset name

Enter HS name

Date & Time

Contrast

Auto Answer

Level 1/2/3

HS Ring Volume

HS Ringtone

Key Tone

SMS Tone

On / Off

Enter new PIN

Adv.Settings

Flash Time

Dial Mode

Tone / Pulse

Short/Medium/Long

Change PIN

Enter PIN

Handset list

Security

Registration

Unregistration

Reset

Call Barring

Enter PIN

Nr. 1/2/3/4

Yes / No

Group Melody

Select melody for group A / B /C

Voice Lang.*

Language list

Wallpaper

Wallpaper 1/2/3/4

Alarm

Alarm Tone

Language

List of languages

Room Monitor

Call To

*Country dependent feature

Menu structure

Call Forward

Call Fwd Busy

Net. Service

Call Fwd UnAns

Voice Mail

Call Back

Withhold ID

network dependent features

Activate / Deactivate / Setting

Contextual soft key labels

Depending on context the following soft key labels may appear above the Left and Right soft keys :

PHBK

Soft key label Function

MENU Initiate a menu function. SELECT Choose the current selection. OK Confirm the current settings / entry or function. BACK Go back to the previous screen. PHBK Access Phonebook list. MUTE Mute the handset microphone. UNMUTE Unmute the handset microphone. SILENT Stop the incoming ring tone. CLEAR Clear the current character and shift the cursor

to the left.

SAVE Save in phonebook. STOP Stop an alarm. VIEW View the details of an entry. ALL To call all handsets via intercom. CONF Start a conference call.

Memory

Puzzle

Games

Tetris

Cancel Call Bk

Conformity, environment and safety

Safety information

This equipment is not designed to make emergency calls when the power fails.An alternative has to be made available to allow emergency calls.

Conformity

Hereby, Philips declares that the DECT 723xx and DECT 727xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging.

Power requirements

This product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT installations defined in standard EN 60-950. In case of power failure, the communication can be lost.

Warning !

The electrical network is classified as hazardous according to criteria in the standard EN 60-950.The only way to power down this product is to unplug the power supply unit from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950.

Safety precautions

Do not allow the handset to come into contact with water. Do not open the handset or the base station.You could be exposed to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials. Never use any battery type other than the one supplied : risk of explosion. Handsfree activation could suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and, where possible, promote their recycling.

Recycling & disposal

Disposal instructions for old products.

The purpose of the WEEE directive (Waste Electrical and Electronic Equipment ; 2002/96/EC) is to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not dispose of your old product in your general household waste bin. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol :

Use one of the following disposal options :

1. Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities.

2. If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive.

Conformity, environment and safety

Declaration of conformity

Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate

disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system.

The labelled packaging material is recyclable.

DECT

is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.

We, PHILIPS Consumer Electronics Route d'Angers 72081 Le Mans Cedex 9 France

Declare that the products DECT 72xx are in compliance with ANNEX IV of the R&TTEDirective 1999/5/EC and then with the following essential requirements :

Article 3.1 a: (protection of the health & the safety of the user)

Safety: EN 60950-1 (10/2001) SAR: EN 50361 (2001)

Article 3.1 b: (protection requirements with respect to electromagnetic compatibility)

EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)

Article 3.2: (effective use of the radio spectrum)

Radio : EN 301 406 V1.5.1 (2003)

The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC is ensured.

Date : 08/07/2005 Le Mans

Product Quality Manager Home Communication

Using GAP standard compliance

The GAP standard guarantees that all DECTTMGAP handsets and base stations comply with a minimum operating standard irrespective of their make.Your DECT 723/727 handset and base station are GAP compliant, which means the minimum guaranteed functions are : register a handset, take the line, receive a call and dial.The advanced features may not be available if you use another handset than a DECT 723/727 with your base station (except with DECT 623/627 handsets). To register and use your DECT 723/727 handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described on page 45. To register a handset of another make to the DECT 723/727 base station, place the base station into registration mode (page 45), then follow the procedure in the manufacturer’s instructions.

Declaration of conformity

0168

Installing the DECT 723/727

NiMh AAA 550 mAh rechargeable batteries

A power supply unit

A line cord*

Unpacking your DECT 723

One DECT 723 base station One DECT 723 handset

A user guide and an SMS leaflet

A guarantee

The DECT 723 package contains:

In DECT 723 and DECT 727 multi handset packs, you will also find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

Installing the DECT 723/727

*Warning : You may find in the box the line adaptor delivered separately from the line cable. In this case, please, first plug this line adaptor onto the line cable before connecting it to the line socket.

NiMh AAA 550 mAh rechargeable batteries

A power supply unit

A line cord*

Unpacking your DECT 727

One DECT 727 base station One DECT 727 handset

A user guide and an SMS leaflet

A guarantee

The DECT 727 package contains:

Installing the DECT 723/727

Installing and replacing the batteries in the handset

To insert the batteries, open the battery cover, place the batteries as indicated and then replace the battery cover.When the handset is placed on the base station, the 3 battery bars scroll (if charge is needed).Allow 12-15 hours for the batteries to fully charge. On first use it may be necessary to wait for a few minutes before seeing symbols on the display. Never use any battery type other than the one supplied : risk of explosion.

Warning: the base station must always be plugged into the mains when charging or when in use. Always use rechargeable batteries.

Battery life and range

Batteries should not be disposed of with general household waste.

Optimal battery life is reached after 3 cycles of complete charging and discharging.When reaching the range limit and the conversation becomes crackly, move closer to the base.To reach optimal range, place the base station away from electrical appliances.

Battery life in

talk time

Battery life in standby

mode

Indoor range Outdoor range

up to 14 hours up to 140 hours up to 50 metres up to 300 metres

The warranty does not apply to the batteries or any other components which have a limited lifetime or are exposed to wear.

Installing the base station

Place your product close enough to the telephone and mains power sockets so that the cables will reach.To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall. If you have a broadband DSL Internet connection, please make sure you have one DSL filter plugged directly on each line socket used in the house and check the modem and the phone are plugged in the correct filter slot (one specific for each).

Warning ! The electrical network is classified as hazardous according to criteria in the standard EN

60-950.The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. Please take care that the power supply and telephone line are connected to the correct sockets as incorrect placement could damage your equipment.

Warning ! Always use the telephone line cable provided with the product otherwise you may not have

dialling tone.

Connect the power supply

Connect the telephone line cord delivered with the product

Configuration mode / Handset power OFF/ON & keypad lock/unlock

Configuration mode

Before using your DECT 723/727, you need to configure it according to the country of use. Install the batteries.After a few minutes of charging, the configuration screen appears.

Browse through the different countries.

Press SELECT to choose the country that suits you.

Browse through the list of operators.

Press SELECT to choose your operator.

Your phone is ready to be used.

If you need to re-configurate your DECT 723/727, see page 38.

Note: If BACK is pressed, the handset will show the country selection screen again.

Handset power OFF and ON

To power OFF or ON the handset long press the key.

Keypad lock/unlock

Long press the key to lock/unlock the keypad in idle mode.

Country dependent feature

Introduction

In idle mode, the DECT 723/727 display shows various information:

Understanding the menu system

Idle mode

Introduction

To access the main menus from the idle mode, press the Left Soft

Key MENU.

Scroll up or down to reach the desired menu and press

the Left Soft Key to SELECT.To return in the idle mode

press the Right Soft Key to select BACK.

The sub menus are listed one under the other, so when reaching the bottom of the list, the first item is then shown again. Up to six sub menus are displayed on the screen.When there are

more than 5 sub menus in the list, an arrow ▼ is displayed between

the soft key labels.

To reach one particular sub-menu, use the navigation keys and

press the Left Soft Key to SELECT. Note : in idle mode the Phonebook names list is also directly

accessible via the Right Soft Key

PHBK, the Call log via the

Down navigation key and the Redial list via the Up navigation

key .

- The date & time, the name of the handset and the instructions to access the menu.

- and the alarm clock , if activated.

- New calls, new SMS or network voicemailbox message, if any.

You can define a wallpaper image for the idle mode (see page 38). By default one of the preinstalled pictures is used as wallpaper.

Basic principles

To store a name from predial

Basic principles

To make, to answer and to end a call

To call from the phonebook

Redial from call log

Press the RSK to directly access PHBK. Choose a name in the list. Make the call.

Enter the name and press OK.

Press SAVE to enter the options.

Predialling

Dial the number.

Direct dialling

Answer a call*

When ringing

Dial the number

Make the call

Dial the number

Press the key

Take the line

Press the Down key to directly access the Call log.

Choose an entry.

Make the call.

End a call

Warning ! Upon incoming calls, the handset ringer volume can increase in the earpiece. Make sure the

handset is not too close to your ear when ringing.

*You can also press the key to answer an incoming external call in handsfree mode. If you have activated the

Auto Answer Mode (see page 41) simply lift up the handset from the base or charger to answer a call.

Call duration counter

After you have taken the line (dial a number or answer a call), the call duration counter appears on the handset display.

Press SELECT.

In-call features

During an external call, some other options are available.

During an external call, you can use the intercom key to call another handset and, for example, transfer the call to this handset.

To mute the handset microphone

Intercom (available only if you have at least two handsets)

Press to activate or deactivate the handset loudspeaker.

Scroll up to increase or down to decrease the volume when on line.

The last setting is stored for the next calls.

If you subscribe to the Call waiting service, a beep in the earpiece informs you of a second incoming call.The name or number of the second caller may be displayed if you also

subscribe to Caller Line Identification Service. To answer that second call, use + (according to your network, the code may be different). Please contact your network

provider for more details.

To switch the handset loudspeaker ON/OFF

Caller Line Identification and Call waiting

To increase/decrease the volume of the earpiece and loudspeaker during a call

Press again to resume the conversation (UNMUTE).

Press to select MUTE (the caller can no longer hear you).

Press to put the external call on hold, the caller can no longer hear you. Enter the number of the handset you want to transfer the call to.

Other options are available such as Switch and Conference call (see page 35-36).

Press the RSK to enter the Phonebook or press the Down navigation key to

enter the Call log or press Up navigation key to enter the Redial list.

To access the phonebook, the call log or the redial list

Warning : Handsfree activation could suddenly increase the volume in the earpiece to a very high

level. Make sure the handset is not too close to your ear.

Press to end the call on the first handset when the second handset has taken the line.

Editing system

By default, the first letter of a sentence is in upper case. Use to change the case mode:

- all letters in upper case (ABC)

- all letters in lower case (abc) or

- the first letter in upper case and the rest of the word in lower case (Abc).

Punctuation and mathematical signs are available by pressing or while other special

characters are also available via (see table below).

Scroll to move the cursor left or right. Press CLEAR to delete a character.

The standard multi-tap system

This system allows you to enter the text character by character, pressing the corresponding key as many times as necessary to reach the desired character. In multi-tap mode, letters available on the alpha-numeric key pressed by the user are shown under the header. The current case mode is indicated between the soft key labels (a or A).

Case mode

Editing system

Multi-tap Sequence

[space]

1 @ _ # = < > ( ) & ¤ £ $ ¥ [ ] { } ¤ §

a b c 2 à ä ç å æ d e f 3 è é ) N

g h i 4 ì Γ

j k l 5 7 m n o 6 ñ ò ö p q r s 7 ß A 2 E t u v 8 ù ü

w x y z 9 f S Ξ Q

. 0 , / : ; " ' ! ¡ ? ¿ * + - % \ ^ ~ |

Keypad Keys

1 2 3 4 5 6 7 8 9 0

To write “Peter” with multi-tap

Press once : P

Press twice : Pe

Press once : Pet

Press twice : Pete

Press three times : Peter

Warning : An unknown character (not available in the characters table) in received SMS messages is replaced by a space.The symbols ¤, [ and ] count as 2 characters.

SMS

The sent SMS can be up to a maximum of 640 characters long.The DECT 723/727 can store 20 SMS messages of 160 characters each in the draft folder and in the Outbox.

SMS stands for Short Message Service.To benefit from this service you must subscribe to the Caller Line Identification Service (CLI) together with the SMS service from your network provider. SMS can be exchanged with a phone (mobile or compatible fixed lines), a fax or an Email address provided the receiver has also subscribed to the CLI & SMS services.

Your DECT 723/727 factory settings correspond to the main national operator. If you wish to send or receive SMS through another service provider you must set the corresponding numbers (see page 25 and the SMS leaflet).

To write and send an SMS to a phone or a fax*

Select Write a SMS option and press SELECT.

Enter the phone number and press OK or press LSK PHBK and

scroll to retrieve the number from the Phonebook list (to send SMS from phonebook, see page 28).

Write and send new SMS

Important informations are also available on the SMS leaflet in the box

Select Send, otherwise

if you want to store your SMS, scroll to Save as Draft and press SELECT. The SMS stored can be later retrieved from Draft folder.

Enter the text and press OK (see page 18).

Note : To delete a wrong character press CLEAR.You can delete and change any

character by simply moving the cursor to the left

or to the right to reach the

character and pressing

CLEAR once.

If you enter more than 640 characters for an SMS or a Fax you will hear an error beep.

SMS

Write a SMS Inbox Outbox Draft SMS settings Default Center

Press to reach the menu list and press SELECT.

Select SMS or scroll to Fax* and press SELECT.

*Country dependent feature

SMS

To send an SMS to an Email address*

Select Write a SMS option and press SELECT.

Enter the email address (up to 30 characters) and press OK.

Press to select Send, otherwise

if you want to store your SMS, scroll to Save as Draft and press SELECT. The stored SMS can be later retrieved from the Draft folder.

Enter the text and press OK (see page 18).

Press to reach the menu list and press SELECT.

Scroll to Email and press SELECT.

View SMS

Scroll to SMS and press SELECT.

Browse the list of SMS and select the message you want to read.

To read an SMS by using the Call log

Press to access the Call log.

The display shows that there is (are) new message(s) : 3 New SMS and in the headline the icon

is ON. If the SMS tone is activated (see page 40) you will hear an alarm tone each time you receive a new message. There are two ways to view the received SMS messages : you can use the Call log keyorthe Inbox menu.The SMS messages are displayed from the newest to the oldest. Unread messages in the Inbox list are shown by an exclamation mark

Note: If you have subscribed to the Caller Identification Service (CLI), the display shows the name or the number of the sender.

Note : To delete a wrong character press CLEAR.You can delete and change any

character by simply moving the cursor to the left

or to the right to reach the

character and pressing CLEAR once.The Email address is part of the SMS and will

reduce the length of the SMS.

Scroll to Inbox and press SELECT. Browse the list of SMS and select the message you want to read.

To read an SMS by using the Inbox menu

Press to reach the menu list and press SELECT.

Press to select VIEW and to see the content of the message.

To return to the inbox list, press BACK.

Press to select VIEW and to see the content of the message.

To return to the Inbox list, press BACK.

While reading SMS, press to scroll to the next page and press to return to the previous page. At the end of the message, the sender number and the date/time of receipt are shown. When viewing the list of received SMS, some options are only available for SMS received from a phone. These options are Reply, Edit, Save Number, Delete and Delete all.

*Country dependent feature

SMS

To reply to an SMS ( for received SMS )

Press MENU, confirm Reply by pressing SELECT.

Enter the text (see page 18) and press OK.

Browse the list of SMS and press VIEW to select the one you want to reply to.

Select Send.

Scroll to Inbox and press SELECT.

Press to reach the menu list and press SELECT.

Scroll to SMS, Fax or Email to choose the type of message and press SELECT.*

Note : if you select Email, you will be asked to enter the Email address before editing the reply message.*

Press MENU, scroll to Edit and press SELECT.

Browse the list of SMS and press VIEW to select the one you want to edit and send again.

You can modify the text if necessary (see page 18) and press OK.

To edit and send again an SMS ( for received SMS )

Scroll to Inbox and press SELECT.

Press to reach the menu list and press SELECT.

Scroll to SMS, Fax or Email to choose the type of message and press SELECT.*

Select Send.

Note : if you select Email, you will be asked to enter the Email address before editing the message.*

To save a sender number in the phonebook

Press MENU, scroll to Save Number and press SELECT.

Browse the list of SMS and press VIEW to select the one you want to copy the number.

Enter the name and press OK.

Scroll to Inbox and press SELECT.

Press to reach the menu list and press SELECT.

The number is inserted automatically. Press OK to confirm.

Browse the list of melodies and select the wanted group ring tone for this record.

Press SELECT to confirm.

Inbox

All received SMS messages are stored in the Inbox (up to 20 messages).

Enter the number and press OK or retrieve it from the phonebook (see page 30).

* Country dependent

Press OK to confirm the number.

* Country dependent

SMS

To delete an SMS from the Inbox

Press MENU, scroll to Delete and press SELECT.

Browse the list of SMS and press VIEW to select the one to be deleted.

Scroll to Inbox and press SELECT.

Press to reach the menu list and press SELECT.

The selected message will then be deleted immediately.

This option enables you to delete all SMS in the Inbox list.

Press SELECT to confirm or BACK if you do not want to delete all your SMS list.

Once selected, a confirmation is required : “Delete All?”.

To delete all SMS from the Inbox

Press MENU, scroll to Delete All and press SELECT.

Scroll to Inbox and press SELECT.

Press to reach the menu list and press SELECT.

Outbox

All your successfully sent messages are stored in the Outbox (up to 20 messages).

To review sent messages

Browse the list of SMS and press VIEW to read the selected message.

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

The list of sent messages is displayed.

Press MENU, press to select Edit

Browse the list of SMS and press VIEW to select the one you want to edit and send again.

You can modify the text if necessary (see page 18) and press OK

To edit and send again an SMS ( for sent SMS )

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

Scroll to SMS, Fax or Email to choose the type of message and press SELECT*

Enter the number, press OK and select Send or retrieve the number from the phonebook (see page 28).

Note : if you select Email, you will be asked to enter the Email address before editing the message.*

Browse the list of SMS and press VIEW.

* Country dependent

SMS

Press MENU, scroll to Resend and press SELECT to start transmission.

Browse the list of SMS and press VIEW to select the one you want to resend.

To resend an Outbox message

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

Press MENU, scroll to Save as Draft and press SELECT to copy the message in the draft folder.

Browse the list of SMS and press VIEW to select the one you want to save as draft.

To save a sent SMS as Draft

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

To delete an SMS from the Outbox

Press MENU, scroll to Delete and press SELECT.

Browse the list of SMS and press VIEW to select the one to be deleted.

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

The selected message will then be deleted immediately.

This option enables you to delete all SMS in the Outbox list.

Press SELECT to confirm or BACK if you do not want to delete all your SMS list.

Once selected, a confirmation is required : “Delete All?”.

To delete all SMS from the Outbox

Press MENU, scroll to Delete All and press SELECT.

Scroll to Outbox and press SELECT.

Press to reach the menu list and press SELECT.

SMS

Draft folder

You can store up to 20 messages in the Draft folder.

Press MENU, scroll to Edit and press SELECT.

Browse the list of SMS and press VIEW to select the one you want to edit and send.

You can modify the text if necessary (see page 18) and press OK.

To edit and send an SMS stored in the draft folder

Scroll to Draft and press SELECT.

Press to reach the menu list and press SELECT.

Scroll to SMS, Fax or Email to choose the type of message and press SELECT.*

Enter the number, press OK and select Send or retrieve the number from the phonebook (see page 28).

Note : if you select Email, you will be asked to enter the Email address before editing the message.*

To delete an SMS from the Draft folder

Press MENU, scroll to Delete and press SELECT.

Browse the list of SMS and press VIEW to select the one to be deleted.

Scroll to Draft and press SELECT.

Press to reach the menu list and press SELECT.

The selected message will then be deleted immediately.

This option enables you to delete all SMS in the Draft folder list.

Press SELECT to confirm or BACK if you do not want to delete all your SMS list.

Once selected, a confirmation is required : “Delete All?”.

To delete all SMS from the Draft folder

Press MENU, scroll to Delete All and press SELECT.

Scroll to Draft and press SELECT.

Press to reach the menu list and press SELECT.

Browse the list of SMS and press VIEW.

* Country dependent

SMS

SMS settings

Choose an SMS centre and press SELECT.

Press to select Outgoing Nr. and press SELECT.

Enter the number (up to 24 digits) and press OK.

Scroll to Incoming Nr. and press SELECT.

Enter the number (up to 24 digits) and press OK.

The SMS are sent via a centre.To receive an SMS from another operator, you must specify the corresponding numbers.

To set the SMS centre number(s)

Scroll to SMS Settings and press SELECT.

Press to reach the menu list and press SELECT.

Scroll to Email Nr. and press SELECT.*

Enter the Email server number (up to 24 digits) and press OK.*

To set the default SMS center

Choose an SMS center and press SELECT.

The SMS center number 1 is the default center. If you wish to send your SMS through another SMS center, you must have specified the corresponding numbers (see above To set the SMS centre number(s)) and selected the corresponding SMS center.

Scroll to Default Center and press SELECT.

Press to reach the menu list and press SELECT.

* Country dependent

Phonebook

List Entry New Entry Edit Entry Delete Entry Delete All Copy from SIM

250 names and numbers can be stored in the phonebook of the handset. The phonebook contains all the information related to the callers.

Scroll to New Entry and press SELECT.

Enter the name (see page 18 “Editing system”) and press OK.

Scroll to Phonebook and press SELECT.

Press to reach the menu list.

New Entry

The names are stored in alphabetical order.

Enter the number and press OK.

All available ring tone melodies can be selected as group ring tones.When ringing, the ring tone helps you identify the caller’s group and the screen shows the caller’s name.A subscription to the Caller Line identification is necessary.

Group ring tone

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry : No Group or Group A, B, C.

To enter a new entry in the phonebook

To store a number from predial in the phonebook

Enter the name and press OK.

Press SAVE to enter the options.

Dial the number.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry : No Group or Group A, B, C.

The number is automatically inserted in the number field, press OK.

Phonebook

To store a number from redial list in the phonebook

Press to access the menu.

Enter the name (see page 18,“Editing system”) and press OK.

Browse through the redial list to select the wanted number.

Press to reach the redial list.

The number is automatically inserted in the number field, press OK.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry.

Scroll to Copy to Phbk and press SELECT.

To store a number from call log in the phonebook

Press to select Copy to Phbk.

Enter the name (see page 18,“Editing system”) and press OK.

Browse through the call log list to select the wanted number and press MENU.

Press to reach the call log list.

The number is automatically inserted in the number field, press OK.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry.

View

There are two possibilities of accessing the phonebook list :

- from the Phonebook menu by selecting the sub-menu List Entry

- from the idle mode by pressing the RSK PHBK. The names are listed in alphabetical order.The letter (A, B or C) on the right of the name indicates that a group ring tone has been assigned to this person.

Navigation in the phonebook

To navigate in the phonebook you can :

- either press Up or Down navigation keys to reach the previous or next entry and press

VIEW to see the details.

- or enter the first letter of the wanted name (e.g., 3 for “D” or 33 for “E”).The first entry

starting with this letter is selected in the list. Press VIEW to see the details.

Press to select Call log.

Phonebook

To call

Make the call.

Browse through the list of names and select a name.

Press RSK to reach the list of names directly.

To send an SMS from the phonebook

Select Write a SMS option and press SELECT.

Press LSK PHBK and scroll to retrieve the number from the Phonebook list.

Press SELECT, to check the number and press OK.

if you want to store your SMS, scroll to Save as Draft and press SELECT. The stored SMS can be later retrieved from Draft folder.

Enter the text and press OK (see page 18).

Note : To delete a wrong character press CLEAR.You can delete and change any

character by simply moving the cursor to the left

or to the right to reach the

character and pressing on CLEAR once.

If you enter more than 640 characters for an SMS or a Fax you will hear an error beep.

Press to reach the menu list and press SELECT.

Select SMS or scroll to Fax and press SELECT.*

Select Send to send the SMS immediately otherwise

* Country dependent

Phonebook

Scroll to Delete Entry and press SELECT.

Scroll to Phonebook and press SELECT.

Press to reach the menu list.

To delete an entry

Browse through the list of names.

Press SELECT to delete the selected entry.

Scroll to Delete All and press SELECT.

Scroll to Phonebook and press SELECT.

Press to reach the menu list.

To delete whole phonebook list

Press SELECT to confirm deletion of the complete phonebook list.

Scroll to Edit Entry and press SELECT.

Enter the new name (see page 18,“Editing system”) and press OK.

Scroll to Phonebook and press SELECT.

Press to reach the menu list.

Enter the new number and press OK.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry.

To edit an entry

Browse through the list of names and press SELECT.

Press CLEAR to delete character by character.

Press CLEAR to delete digit by digit.

Note : If, for example, only the number is to be changed, press OK until the number is shown on the display and modify it.

Once selected, a confirmation is required :“Delete All ?”.

Phonebook

Scroll to Phonebook and press SELECT.

Press to reach the menu list.

Copy phonebook from SIM

Your mobile phone SIM card might contain all or part of your current phonebook.The DECT 723/727 is able to read the phonebook content of a 3V SIM card.You can copy your SIM phonebook onto the built-in phonebook of your DECT 723/727. Only your mobile phone SIM phonebook will be copied, the phonebook that is on the mobile phone memory will not be copied.

Note: the SIM card reader is not compatible with 3G phones SIM cards.

Scroll to Copy from SIM and press SELECT.

First insert the SIM card in the slot on the base station :

1. Open the SIM card tray and remove it from the base station.

2. Slide the SIM card between the retaining clips, microchip facing up, until it stops. Be carefull that the clipped corner is in the same position as on the illustration.

2. Put the SIM card tray back in the slot on the base and push it into place until latch catches.

Then use the handset to start copy of the SIM phonebook :

The unit will check if a SIM card is inserted in the card slot. If no SIM is detected the handset displays No SIM Card!. If the device detects your SIM card, you will be prompted to enter your SIM card PIN. When the device can read the content of the SIM card, the handset will show : Copying.. and the counter indicates the percentage of progress. In case that a SIM phonebook name entry match exactly the name of one of the existing entry in the built-in phonebook, Overwrite? appears on the handset display. Press LSK

YES or RSK NO, then the copying process will continue. On completion, the handset displays Transferred!. Remove the SIM card from the card tray. Note: If the phonebook memory is full, Memory full will be shown before aborting the process.

Call log

Browse through the call log entries and read the information.

Press SELECT to select Call log.

Press to view the call log details directly.

Call log

The call log can store up to 20 entries. If you have subscribed to the Caller Line Identification (CLI), you also will have the incoming calls in the list. In this case, the name (or number) of the callers will be displayed.The date & time of the call are also shown. If you have no subscription, the display shows “External Call”. The calls (missed and received) are displayed in chronological order with the most recent at the top of the list.When the call log is empty, the screen displays “No Call”.

To view the call log

Press to call.

Scroll to select a call log entry.

Press to view the call log details directly.

To call / redial

Note : to be able to call back a caller in the case of an incoming call, you need to subscribe to the

Caller Line Identification service.

Note : The word “New” on the right of the entry number indicates the caller’s information has not been read.

Press SELECT to select Call log.

To store a number from call log in the phonebook

Press MENU to access the menu.

Enter the name (see page 18,“Editing system”) and press OK.

Browse through the list of details to view the wanted entry.

Press to view the call log details directly.

The number is automatically inserted in the number field, press OK.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry.

Select Copy to Phbk.

Press SELECT to select Call log.

Call log

To delete a name or a number

Press MENU to access the menu.

Browse to view the wanted entry.

Press to directly reach the call log.

Scroll to Delete and press OK. A confirmation tone is heard and the screen will show the call log again.

To delete all call log entries

Press SELECT to select Call log.

Press to directly reach the call log.

Scroll to Delete All and press OK.

Press OK to confirm deletion of the complete call log list. A confirmation tone is heard and then the phone returns to the idle mode.

Press SELECT to select Call log.

Press MENU to access the menu.

Redial list

Browse through the list. To view the details of a selected redial number :

Press to directly reach the redial list in the idle mode.

Redial list

The last 20 dialled numbers are stored in the redial list. The dialed numbers (or names, if the numbers match the phonebook entries) are displayed in chronological order with the most recent at the top of the list.When the redial list is empty the screen displays “List empty”.

To view the redial list

Press MENU.

Press LSK to select VIEW.

Press the Up or Down navigation key to view the details of the previous or next record.

Press to call.

Browse through the redial list to select the wanted number.

Press to directly reach the redial list in the idle mode.

To call / redial

To store a number from redial in the phonebook

Press to select MENU.

Enter the name (see page 18,“Editing system”) and press OK.

Browse through the redial list to select the wanted number.

Press to directly reach the redial list.

The number is automatically inserted in the number field, press OK.

Browse through the list to hear the ring tones and select your chosen group ring tone for this entry.

Scroll to Copy to Phbk and press SELECT.

Redial list

To delete a name or a number from redial list

Press to select MENU.

Browse through the redial list to select a record.

Press to directly reach the redial list.

Scroll to Delete and press SELECT. Then the screen will show the redial list again.

To delete whole redial list

Press to select MENU.

Press to directly reach the redial list.

Scroll to Delete All and press SELECT.

Press OK to confirm deletion of the complete redial list. Then the phone returns to idle mode.

Using the Intercom

Enter the number of the handset you want to call or press ALL.

Press in the idle mode.

Using the Intercom (if there are at least 2 handsets, see page 17)

This feature allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.

Internal call

Hang up or put the phone in the cradle to terminate the internal call.

Press to put the external call on hold, the caller can no longer hear you. Enter the number of the handset you want to transfer the call.

The called handset rings.

Press to end the call on the first handset and to transfer the external call to the other handset.

Note : If the handset does not belong to the Philips DECT 723/727 range, this function may not be available.

Hang up the current internal call and then

Press to accept the external call and put the internal call on hold.

Incoming external call during an intercom call

press to accept the incoming external call.

Call transfer to a specific handset when on line

Note : If there is no answer from the called handset, you can resume the call on the first

handset.

If the called handset takes the line, both internal callers can talk.

Press to put the external call on hold, the caller can no longer hear you. Enter the number of the handset you want to transfer the call.

The called handset rings.

Press to toggle between the external and internal call.

Switch between internal and external call

Note: If there is no answer from the called handset, you can resume the call on the first

handset.

If the called handset takes the line, both internal callers can talk.

Note : To answer the call on the second handset, you can press .

Using the Intercom

Press to put the external call on hold, the caller can no longer hear you. Enter the number of the handset you want to call.

The called handset rings.

Press CONF to start a 3-party conference. The 3 people can share the conversation.

Conference call via the in-call options

Note : If there is no answer from the called handset, you can resume the call on the first

handset.

If the called handset takes the line, both internal callers can talk.

Conference call allows one external call to be shared with two handsets (in intercom).The 3 people can share the conversation. No operator subscription is needed.

Personalize

Browse through the options Off, On Once, On Daily and select the appropriate setting. If you select On Once or On Daily :

Enter the time and press SELECT.

By default the alarm is off.

To set the alarm clock ON/OFF

Scroll to Alarm and press SELECT.

Press to reach the menu list.

When the alarm is set to On Once or On Daily, an alarm icon is shown in idle mode in the display headline.The alarm tone rings for 1 minute at the most. Press any key to stop the

alarm and return in idle mode.

Press to select Clock & Alarm.

Press to reach the menu list.

Press SELECT to confirm.

To set the date and time (of the handset and base station)

Clock & Alarm

Enter the current time (HH:MM).

After setting, the date and time are shown in idle mode.

Press to select Date & Time.

Enter the current date (DD/MM).

Warning : If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. Please check the date & time settings in your ISDN system. Please contact your network provider (see FAQ page 55).

Alarm

Personalize

Clock & Alarm Language Wallpaper Contrast Handset Tones Handset name Auto Answer Room Monitor

Scroll to Personalize and press SELECT.

Scroll to Personalize and press SELECT. Press to select Clock & Alarm.

Personalize

Wallpaper

This feature allows you to specify the wallpaper that is displayed in idle mode. There are 4 wallpapers pre-installed in your phone.

Scroll to Wallpaper and press SELECT.

The currently selected wall paper is shown.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Scroll to view the wallpaper pictures and press to SELECT your chosen wallpaper.

To specify a wallpaper

Scroll to Alarm Tone and press SELECT.

Press to reach the menu list.

Browse through the list of alarm tones to hear them and press to SELECT the appropriate one.

To set the alarm tone

Three alarm tones are available.

The current alarm tone is heard.

Scroll to Language and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

To change the language

Language

Browse through the list of languages and press SELECT.

Your phone supports different languages for the menus.

Press to select Clock & Alarm.

Scroll to Personalize and press SELECT.

Personalize

Scroll to Handset Tones and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Browse through the list of melodies to hear them and press to SELECT the appropriate one.

To set the handset ring tone

Scroll to HS Ringtone and press SELECT.

To select the ring melody from the choices available.

The current melody is heard.

Scroll to Contrast and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

The currently selected contrast level is highlighted.

Browse through the contrast levels to see the difference and press to SELECT the appropriate one.

To set the display contrast

Contrast

Three display contrast levels are available.

To set the handset ring volume or silence mode

Handset Tones

Three ring volume levels and silence (ringer off ) are available.

Scroll to Handset Tones and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Browse through the levels to hear them and press to SELECT the appropriate one.

Press to select HS Ring Volume. The current level is heard.

Note :When Silence is selected, this icon is shown in the idle mode.

Personalize

Allows you to determine whether there is an alert beep each time you receive a new message. By default the SMS tone is ON.You can deactivate it.

Scroll to Handset Tones and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Select On or Off and press SELECT to confirm.

To activate / deactivate the SMS tone

Scroll to SMS Tone and press SELECT.

Scroll to Handset Tones and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Browse through the list of melodies to hear them and press to SELECT the appropriate one.

To set the group ring tones

Scroll to Group Melody and press SELECT.

This menu enables you to select and set the melodies to be played in case of an external incoming call with CLI enabled and when the number is known in the phonebook and set as a group.There are 3 groups of caller (see page 26 Phonebook, Group ring tones).You can associate 1 ring tone to each group (A, B, C).

Scroll through the 3 different groups and select one.

Scroll to Handset Tones and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Select On or Off and press SELECT to confirm.

To activate / deactivate the key tone

Scroll to Key Tone and press SELECT.

By default the key tone is ON.You can deactivate it.

Pesonalize

Scroll to Handset Name and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

Press OK to confirm the new name.

To rename a handset

Handset name

Enter the new handset name (see page 18).

You can rename your handset and display the name in idle mode . By default the handset name is “PHILIPS”.

Scroll to Auto Answer and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

To activate / deactivate the auto answer mode

Auto Answer

Select On or Off and press SELECT.

This feature allows you to set Auto Answer ON or OFF. If ON, you can answer a call by simply lifting the handset from the charging cradle.The default setting is Auto Answer Off.

Personalize

Scroll to Off and press SELECT.

The handset returns in idle mode.

Press LSK MENU.

On the handset beeing in room monitor mode (e.g. handset 1) :

To deactivate the room monitoring

Scroll to Room Monitor and press SELECT.

Scroll to Personalize and press SELECT.

Press to reach the menu list.

To activate the room monitoring

Enter in the Call To field the number of the handset to be called (e.g. 2) and press

OK.

The handset 1 displays Room Monitor. All keys on handset 1 are deactivated except the left softkey MENU.

To use the room monitoring feature you need to activate it (e.g. on handset 1) and to enter the number of the handset to be called (e.g. handset 2) in the case there are noises in the monitored room. Place the handset which is in room monitoring mode (e.g. handset 1) in the room to be monitored. If this handset detects a sound level greater than a certain threshold, it will automatically initiate an internal call to the selected handset (e.g. handset 2).

Note: During room monitoring, you can use the second handset (handset 2) to answer a call or dial a number.

Room Monitor

if there are at least 2 handsets registered to the base

This feature allows you to monitor e.g. the baby’s room. Place the handset in the room to be monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station.

Advanced Settings

Adv. Settings

Dial Mode Flash Time Voice Lang. Security Registration Unregistration Reset

Press to select Dial Mode.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

To change the dial mode

Dial Mode*

Browse to select Tone or Pulse and press SELECT.

By default your phone is pre-configured with the country dependent settings and you do not have to change them.

Note : This setting allows you to select pulse dialling (also called “Loop disconnect” which is used in countries without DTMF tone dialling capability or when using old PABX).

Scroll to Flash Time and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

To change the flash time

Flash Time*

Browse to select Short or Medium or Long and press SELECT.

This setting is useful when using operator services.

Note : The use of some operator services accessed with + , + and + (call waiting, call forward ...) will depend on the flash setting according to your installation type (ISDN, Public,

PABX).

*Country dependent feature

Advanced Settings

Scroll to Security and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

To change the PIN code

Security

The default code is the registration code “0000”.We advise you to personalize it.

Press to select Change PIN.

Enter your PIN code and press OK.

Scroll to Security and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

To set or change Call Barring

This menu allows you to limit the use of your phone to specific calls by giving you the possibility to bar parts (prefix) of outgoing phone numbers.You can set 4 different barring numbers.

Scroll to Call Barring and press SELECT.

Enter your PIN code and press OK.

Browse to select the barring Number 1, 2, 3 or 4 to be changed and press SELECT.

Enter the barring number (e.g. 00 to bar international calls) and press OK. Repeat the last 2 steps to enter or change further call barring numbers.

Note : If you have already changed the PIN code, you will be prompted to enter this new PIN code before changing it again.

Scroll to Voice Lang. and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

To set the voice language

Voice Language*

Choose the appropriate language in the list and press SELECT.

You can change the language of the answer machine for the predefined outgoing messages (see page 50).

only available for DECT 727

*Country dependent feature

Advanced Settings

Scroll to Registration and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

Registration

Up to 5 handsets can be registered to the base station.

Warning : If you wish to register non Philips handsets to the DECT 723 or DECT 727 base station, make sure that this handset is GAP compliant otherwise it will not operate properly (see page 11).

Enter the 4-digit PIN code (by default “0000”) and press OK.

If the registration was successfull a long confirmation tone is heard and the handset number (1 to 5) will be assigned by the base automatically.

To register a handset

If you have inadvertently unregistered your handset you can register it again. Additional handsets must be registered to the base before use.

To register a handset, first press the paging key on the base for approx. 5 seconds when the base is in idle mode.Then carry out the following steps on the handset within one minute :

To unregister a handset

Scroll to Unregistration and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

Choose the handset to unregister from the list and press SELECT.

Note : Should you have your handset serviced, please make sure it is unregistered from the base station before taking it back to the repair centre.

Scroll to Reset and press SELECT.

Scroll to Adv. Settings and press SELECT.

Press to reach the menu list.

Select Ye s to reset your phone and press SELECT.

You can reset your phone to the default settings (see page 54) at any time . Note that after a

reset all your personal settings and saved data (phonebook entries, SMS messages, call log and redial list) will be deleted.

Note : After a reset you need to reconfigure your phone, refer to page 38.

To reset to default settings

Network Service

Net Service

Call Forward Call Fwd Busy Call Fwrd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID

This feature allows you to activate or deactivate operator services that are subscription dependent. Contact your network operator for more information on the services.You can usually subscribe to Call forward, operator voice mailbox etc ...

Example of service : Call forward

Browse through the list of services and press SELECT.

Scroll to Net. Service and press SELECT.

Press to reach the menu list.

Enter the number to which the calls are to be forwarded and press OK. The number is automatically chained to the call forward prefix and the phone dials the number.

To activate / deactivate Services

Browse through the list of services and press SELECT.

Scroll to Net. Service and press SELECT.

Press to reach the menu list.

Select Activate or Deactivate and press SELECT.

The dialling number string for that selected service will be dialled out.

Press to return in the idle mode.

Scroll to Setting and press SELECT.

Calls can be redirected to another phone number.

Hang up.

Net Service

Games

Memory Puzzle Tetris

Your DECT 723/727 is equipped with 3 games : Memory, Puzzle and Tetris.

Games

To choose the games

Browse through the list of games and press SELECT.

Scroll to Games and press SELECT.

Press to reach the menu list.

An instruction screen appears on the handset display.

To start and exit the game

Press RSK.

Press BACK to return to previous screen.

Press SELECT to start the game.

To exit the game :

Answer machine DECT 727

Record Memo &

Outgoing messages

Short press to record a memo. Long press to record outgoing message 1 for Answer & record mode or outgoing message 2 for Answer only mode.

Skip forward / Next

message

Short press to go to the next message while listening.

ON/OFF key

Press to switch the answer machine ON or OFF

Play / Stop key

Short press to play message. Short press to stop playback while listening to a message. Long press to enter answer machine setting mode.

Paging key

Press to locate all handsets.

Loudspeaker

Skip back / Replay key

If pressed within 1 second of message playback : Skip to previous message. If pressed after 1 second of message playback : Replay current message.

/ Volume keys

To adjust the base volume level

Base 727 Display with backlight

Backlight will be ON when there are new answer machine messages or answer machine memory is full. Icons see page 49

Delete key

Short press to delete the current message during playback. Long press in idle mode to delete all messages (the unread messages will not be deleted).

The DECT 727 includes an answer machine that records unanswered calls when it is activated. The answer machine can store up to 99 messages within the maximum recording time of 30 minutes.

DECT 727 answer machine keys

Microphone

SIM card tray

setting/ ok

Answer machine DECT 727

The Remote access code is activated.

New unread message(s) on answer machine.

Old message(s) on answer machine, already read.

The answer machine is ON.

Indicates the type of outgoing message.

Indicates the number of rings before the answer machine will start playing the outgoing message. Call screening ON

The display of the DECT 727 answer machine gives information about the answer machine and the settings.The date and time setting of the base is done simultaneously when setting date & time on the handset (see page 37).

Date (DD / MM)

Time (HH : MM )

Number of messages

DECT 727 answer machine display

To switch the DECT 727 Telephone Answer Machine ON/OFF

When it is switched ON, the selected outgoing message is automatically played.The answer machine display backlight will also be lighted if there is (are) one or more new unread message(s).

Press ON/OFF key on the base to switch the answer machine ON or OFF.

When the answering machine is ON, it will answer the call after a certain number of rings depending on the setting (see page 51).After answering the call, the answering machine will play your welcome message and record the message left by the caller, if any.

Saved messages

To listen to new message(s)

The LCD backlight is ON and the base display shows that there is one or more new message(s) : 3 .

Messages are always played in chronological order, the oldest new message first. The message counter and the date and time of recording will be shown on the display.

setting/ok

Press to start playback.

Press to skip back to the previous message or replay current message.

Press to skip forward to the next message.

During message playback, the following functions are available :

setting/ok

Press to stop playback and press again to continue playback.

Call screening OFF

Note : If there is no more memory keep, two bars on the display will kept flashing and the base LCD backlight will be ON continuously. Delete old messages (see page 50) to free space for the new one.

Answer machine DECT 727

Volume adjustment

Press to decrease the loudspeaker volume.

Press to increase the loudspeaker volume.

During message playback and call screening you can adjust the loudspeaker volume by using the keys on the rear of the base:

Delete answer machine messages

To delete an answer machine message

Press to delete while listening to a message.

A short beep confirms deletion of the message.

To delete all answer machine messages

Press and hold to delete all old messages.

A long beep confirms deletion of all old messages.Then the answer machine display shows “00” without the envelope icon.

Deletion of all messages is only possible in idle mode and when there are no new unread messages :

Note : Deleted messages can not be recovered. If there is no more memory left, two bars on the display will keep flashing and the base LCD backlight will be ON continuously.

Answer machine settings

In the answer machine setting sequence the following items can be modified one after the other in the fixed order (all settings must be done in a row) :

1. Outgoing message selection (1/2)

2. Ring delay (1 - 7)

3. Call screening (ON/OFF)

4. Remote access code

Volume adjustment

Sequence 1 :To select the answer mode and the outgoing message type

The answering machine announces the outgoing message when it answers the call. There are 2 default outgoing messages :

Outgoing message 1 Answer & Record (when messages can be left). Outgoing message 2 Answer only (when no messages can be left)

The voice language of the predefined outgoing messages can be changed (see page 44). You can also record your own outgoing message 1 and outgoing message 2 (see page 52).

Press to switch the answer machine ON.

To enter the answer machine setting mode :

Press for approx. 4 seconds, until the outgoing message icon flashes and all other icons except power are cleared.

setting/ok

Answer machine DECT 727

Sequence 2 :To set the number of rings before answering

After having confirmed the outgoing message type (see above), you may select ring delay.

The ring delay icon will flash and all other icons except power will be cleared.

Press + or

- to select the wanted ring delay : 1, 2, 3, 4, 5, 6, 7 or $ (economy mode).

The currently selected number of ring delays will be shown inside the icon .

Press to confirm the selected number of ring delays

and then proceed to the next setting.

You can set the answer machine to start playing the outgoing message after a given number of rings (1 - 7 rings or Economy mode

$).The economy mode (activated by default) is useful when

using the remote access.The answer machine will start playing the outgoing message after 3 rings if there are new messages. If there is no new message, the outgoing message will be played after 5 rings. Hang up after the 4th ring if you want to check if you have any messages at no cost.

Sequence 3 :To activate / deactivate call screening on the base

After having confirmed the number of ring delays (see above), you may select call screening ON or OFF.

The loudspeaker icon will flash and all other icons except power will be cleared.

Press + or

- to select call screening ON or OFF.

If call screening OFF has been selected the loudspeaker icon will be crossed .

Press to confirm the selected call screening setting

and then proceed to the next setting.

You can activate or deactivate the call screening on the base loudspeaker, i.e. choose whether you want to hear the message being left by your callers or not. By default the function is activated.

Press + or

- to switch between outgoing message 1 or 2.

The current outgoing message number will be shown inside the icon .

Press to confirm the selected outgoing message

and then proceed to the next setting.

Note : If you do not wish to change the outgoing message type, press (key on the base station).

setting/ok

Note : If you do not wish to change the number of rings before answering, press (key on the base station).

setting/ok

Note : If you do not wish to change the call screening setting, press (key on the base station).

setting/ok

Answer machine DECT 727

Personal outgoing messages

Sequence 4 :To change the remote control access code

After having confirmed the call screening setting (see page 51), you may change the remote control access code.

The first digit of the access code and the lock icon will flash.

Press + to increase or

- to decrease the first digit of the remote control code.

setting/ok

Press to confirm.

The first digit will stop flashing and the second digit will flash.

The remote control access code is needed to remotely control your answer machine and to prevent unauthorized access of the answer machine from external callers. Warning ! If the setting of the remote access code is 00 (as by default), the remote control access is disabled.

setting/ok

Press + to increase or

- to decrease the second digit of the remote control code.

Press to confirm.

Then all the settings will be finished and the display will return in idle mode.

You can record 2 different personal outgoing messages : a specific personal welcome message 1 for Answer & record mode and a specific personal welcome message 2 for Only answer mode. The personal outgoing messages will replace the default ones. If you delete your personalized welcome message, the default welcome message will automatically be restored. The maximum recording time for a welcome message is 60 seconds.You do not need to delete your previously recorded welcome message to record a new one. Once you record a new welcome message, the old one will be overwritten.

To record your personal outgoing message

To record welcome message 1 for Answer & record mode, first check if welcome message 1 is selected as the answer machine setting (see page 50).

To record welcome message 2 for Only answer mode, first check if welcome message 2 is selected as the answer machine setting (see page 50).

Long press (for approx 4 seconds) until a long beep is heard to indicate that you can start recording.

Speak into the microphone of the base station after the beep.

setting/ok

Press to stop recording.

A long beep confirms successful recording and the recorded message will playback automatically for review.

Note : If you are not satisfied with the recorded outgoing message, repeat the above steps and the old welcome message will be overwritten. Play it and delete it to restore the default outgoing message, or record a new welcome message overwritting the previous one. If you want to have the default outgoing message back, see “To delete personal outgoing message”, page 53.

Note : if you do not wish to change the remote control access code, press (key on the base station).

setting/ok

Answer machine DECT 727

To play back personal or default outgoing message

To play back outgoing message 1, first check if outgoing message 1 is selected as the answer machine setting (see page 50).

To play back outgoing message 2, first check if outgoing message 2 is selected as the answer machine setting (see page 50).

Turn the answer machine off.

Turn the answer machine on again.

When it is switched ON, the selected outgoing message is automatically played.

To delete personal outgoing message

To delete outgoing message 1, first check if outgoing message 1 is selected as the answer machine setting (see page 50).

To delete outgoing message 2, first check if outgoing message 2 is selected as the answer machine setting (see page 50).

Turn the answer machine off.

Turn the answer machine on again.

When it is switched ON, the selected outgoing message is automatically played.

Press to delete the personal outgoing message during playback and to restore the default outgoing message.

Note : The default outgoing messages cannot be deleted.

Record and listen to a memo

This feature allows you to leave local messages for your family on the answer machine.The maximum recording time for a memo is 180 seconds.

Press until a long beep is heard to indicate that you can start recording.

Speak into the microphone of the base station after the beep.

setting/ok

Press to stop recording.

A long beep confirms the memo is sucessfully recorded.The LCD backlight turns ON and the base display shows that there is one new message : 1 .

To record a memo

To listen to a memo

The LCD backlight is ON and the base display shows that there is one new message : 1 .

The message counter and the date and time of recording will be shown on the display.

setting/ok

Press to start playback.

Note: The voice language of the predefined outgoing messages can be changed (see page 44).

Answer machine DECT 727 / Default settings

To remotely control your answer machine

To remotely access your answer machine :

- dial home from another phone.

- If your answer machine is ON, press the star key on the external phone during or after the outgoing message ; if your answer machine is OFF, you will hear a beep after 10 rings, then

press the star key.

- Dial your remote control code (not 00) and press

# to confirm.

- If you have new messages, they will be automatically played after the beep.

To remotely control your answer machine

The following table indicates the features available when remotely accessing the answer machine.

Answer machine ON/OFF dial

Play previous message dial

Play message / Stop dial

Play next message dial

Delete dial

Warning : The remote control access is only possible if the remote access code is NOT the default (00 = Remote access OFF), see page 52.

You can access your answering machine when you are away by using any tone dialling phone.

Default settings

Handset Ringer volume : Level 2 Handset Ringtone : Melody 1 Group A melody : Melody 1 Group B melody : Melody 2 Group C melody : Melody 3 Handset earpiece volume : Level 3 Handset speaker volume : Level 3 Handset key tone : ON SMS tone : ON Battery low tone : ON Room monitoring : OFF Menu language (Handset) : Country dependent Auto answer : OFF Wallpaper : Wallpaper 1 Handset name : PHILIPS Time/Date (Handset) : 00:00 01-01-2005 Dialling mode : Country dependent Flash time : Country dependent PIN code Handset : 0000

Only DECT 727 :

Remote access code: 00, Remote access OFF Voice language outgoing message : Country dependent

Phonebook memory : Empty SMS Inbox, Outbox, Draft : Empty Call log : Empty Redial list : Empty

FAQ

1/ I have no dialling tone after having installed my phone. How do I solve this problem? Check that you have connected your phone using the supplied line cable and not the one from any previous phone (they are often wired differently). Check that you have fully charged the handset according to the instructions given for the phone. Check that the aerial icon (radio link with the base station) is displayed. If the handset is not registered you may need to register it (see page 45).

2/ Can the handset be left on the base all the time? Yes there is no “memory effect”.The handset can be left on the base station for all current models using NiMh batteries.

3/ Will my phone lose all recorded data (phonebook entries, recorded messages) in the case

of a general power cut?

No it will not.The data recorded in your phone is not deleted in the case of a general power failure or when you unplug your base station or when you replace the batteries.

4/ I have set up the date & time on my phone and the information given after a call is not

correct.Why?

If you have a ISDN phone installation, these parameters (date & time) may be transferred directly through the ISDN to the phone. If you did not set up the ISDN correctly, this could explain why the information transmitted is not correct. Set up the date & time directly on the ISDN phone installation or, if this is not possible, call the network operator/dealer who provided and installed the ISDN.

5/ I cannot use the answering machine of my Philips phone together with my Fax. Both are

plugged into the same line.Why is this? (DECT 727 only)

To avoid this, it is recommended to set up the number of rings before the answering machine switches on. Example: if the network mail box or a fax is set to answer the calls after 4 rings, please set up your answering machine on 3 rings.To set up the number of rings, please see page 51.

6/ What is CLI and how do I make it work? CLI stands for Caller Line Identification and it is a special service that you may subscribe to from your network operator. Once you have subscribed to the service, a CLI enabled phone will display the callers number (unless withheld) when the phone rings so that you may decide whether or not to take the call.

7/ The CLI service does not work on my Philips phone, on my digital phone installation

(ISDN,ADSL). How do I solve this problem?

Our products are designed to work on an analogue network. If you plugged your PHILIPS phone into a digital installation, the CLI may not be displayed upon incoming calls. Digital phone installations (ISDN) are not always compatible with analogue phones as far as operator services are concerned. You may find the information regarding compatibility in the user guide of your ISDN. If not, please contact the ISDN manufacturer to check if the device is designed to display CLI on analogue phones. ISDN over 2 or 3 years old may not be compatible with analogue phones for the CLI Service. Note that the filters used with some ADSL lines can filter out part of the CLI signal and prevent the phone from displaying CLI correctly. It is possible to purchase better ADSL filters that do not cause this problem.

FAQ

8/ What is CNIP (Caller Name Identification)? As with the CLI service, this new feature is dependent on the Network and it has to be activated by your network operator (by subscription). It will allow you to have the name of the caller displayed upon an incoming call. This service may not be available from all operators yet.We advise you to check with your operator. N.B. If the name of the caller is registered in your phonebook upon an incoming call it will be the name you have registered which will be displayed and not the one provided by the operator.The data in your phonebook will have priority over the operator’s data in this particular case. The CNIP uses the same technology as for the CLI.Therefore the limits of this service are identical (please refer to the questions related to CLI if the service is not working properly). Remember that it only works with alphanumeric display.

9/ How many telephones can I have? All items of telephone equipment have Ringtone Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. Your DECT 723/727 has a REN of 1. A total REN of 4 is allowed, if the total REN of 4 is exceeded, the telephones may not ring. With different telephone types there is no guarantee of ringing, even when the REN is less than 4.

10/ My answering machine does not record the messages left by my callers. How do I solve this

problem?

Check the operator voice mail box is not activated. If it is activated, set the answering machine so that it starts recording first (set up the number of rings before the answering machine switches on).

11/ Which are the conditions required to be able to send an SMS ? You must first have a subscription to Caller Display (CLI) service from your network operator as well as an SMS service subscription from the appropriate provider.

12/ Is it possible to write, read send or receive an SMS when the other handset is in

use (DECT 723 and DECT 727 multi-handset packs only)?

No, it is not possible.

13/ What happens if I send an SMS to a fixed line with no SMS phone ? The person could receive a voice message (SMS provider dependent).

14/ Is it possible to send an SMS to a fixed line in another country ? This feature depends on your provider. Please contact your provider for more details.

15/ How can I get the SMS centre number ? At least one SMS centre number is pre-programmed in your DECT 723/DECT 727. However, should you need to store another number, other numbers can be set via the menu SMS/SMS Settings/SMS Center. Please check the incoming and outgoing centre numbers with the SMS provider or from the enclosed addendum to your phone user manual.

16/ When using my SMS-enabled Philips phone with another SMS-enabled phone on the same

line, can it cause any problems ?

Yes, this will prevent the phones from receiving SMS.You need to deactivate the SMS feature on one of the phones.

Troubleshooting

The icon does not scroll when the handset is placed on the base

PROBLEMS

No dialling tone

- Crackling on the line

The handset displays ‘not available’

- when attempting to add another handset to the base station

- when using a handset

Noise interference on your radio or television

Caller Line Identification (CLI) service does not work

No ring tone

The icon does not appear

The icon is blinking

- Bad battery contact

- Dirty contact

- Battery is full

CAUSES

- No power

- Batteries are empty

- You are too far from the base station

- Wrong line cable

- Line adaptor (when needed) not connected to the line cord

- The ring tone is deactivated

- No mains power

- The handset is too far from the base station

- Handset not registered to the base station

- You are too far from the base station

- The base station is too close to electrical appliances, reinforced concrete walls or metal doorframes

- The procedure to add a handset has failed, try again

- Maximum number of handsets (5) has been reached

- Base station is already busy with another handset

The DECT 723/727 base station or mains power pack are too close to electrical appliances

- The service is not activated

- Move the handset slightly

- Clean the contact with a cloth moistened with alcohol

- No need to charge

SOLUTIONS

- Check the connections. Reset the phone : unplug and plug back in the mains

- Charge the batteries at least 24 hours

- Move closer to the base station

- Always use the line cable provided

- Connect the line adaptor (when needed) to the line cord

- Increase the volume (page 39)

- Check connections

- Move closer to the base station

- Register the handset to the base (page 45)

- Move closer to the base station

- Move the base station to find a better place (the higher the better)

- Disconnect and connect the base station power supply.

- Remove and place back the handset battery

- Follow the procedure to register a handset (page 45)

- Unregister a handset

- Wait until it is available

Move the power pack or base station as far away as possible

- Check your subscription with your network operator

Telephone troubleshooting

www.philips.com/support

A phonebook entry cannot be stored

The phonebook is full Delete an entry to free memory

Troubleshooting

CAUSESPROBLEMS SOLUTIONS

No new SMS are received

No SMS can be sent or received

- SMS storage space is full

- Wrong SMS settings

- The outgoing or incoming SMSC number is not set or is wrong

- You have no subscription

- Another SMS-enabled phone is also on your line

- There is a problem of compatibility between operators

- The identity is withheld

- Delete old SMS

- Check SMS settings p. 25

- Refer to the SMS leaflet to get the correct SMSC’s numbers

- Contact your provider for more information

- Deactivate the SMS mode on one of the device.

- Contact your provider for more information

- Show identity

Answer machine troubleshooting

No caller Id/ poor audio quality/Poor connection quality with broadband DSL internet

- DSL filter(s)/splitter missing or insufficient number of filters

- Modem &/or phone plugged in the wrong DSL filter slot

- Defective DSL filter(s)

- Make sure you have one DSL filter plugged directly on each line socket used in the house

- Check the modem and the phone are plugged in the correct filter slot (one specific for each)

- The filter(s) can be defective. Replace it/them and make another test

www.philips.com/support

CAUSESPROBLEMS SOLUTIONS

The answer machine does not record messages

The remote control access does not work

- The memory is full

- The answer only mode is activated

The remote control access is not activated (code 00 disable is set)

- Delete messages

- Select the Answer & record mode

Change the remote control access code (page 52)

It is not possible to record an outgoing message

The memory is full Delete messages

The DECT 727 hangs up during remote access

- Failed attempt to send a code

- Duration is too long

- Enter the correct code

- Manage the remote control quicker

The answer machine stops automatically

- The memory is full

- Message exceeds 180 sec

- Play & delete messages

- Messages must not exceed 180 sec

The copy from my mobile phone SIM card to the DECT723/727 phonebook is not complete.

Only your mobile phone SIM card phonebook will be copied, the phonebook that is on the mobile phone memory will not be copied.

Transfer your mobile phone memory phonebook to your mobile phone SIM phonebook and then to your DECT723/727.

Index

Add new entry (phonebook) 26 Alarm clock 37 Alarm tone 38 Answer a call 1, 16 Answer machine (only DECT 727) 48 Answer machine settings 50 Auto answer 41

Babysit mode 42 Base keys 4 Base installation 13 Batteries & battery life 13

Call barring 44 Call duration 16 Call forward 46 Call log 31 Call transfer 35 Call screening 51 Case mode 18 Change name (Phonebook) 29 Change number (Phonebook) 29 Clear character 19 Choose country/operator 14 Code PIN 44 Code remote access (answer machine) 52 Conference call 36 Conformity 10, 11 Contrast 39 Copy phonebook from SIM card 30 Copy to phonebook (number from SMS) 21

Date and time 37 Declaration of conformity 11 Default settings 45, 54 Default SMS center 25 Define ring tone 39 Delete all (Answer machine) 50 Delete all (Call log) 32 Delete call log entry 32 Delete an entry (Phonebook) 29 Delete an SMS 22, 23, 24 Dial mode 43 Display contrast 39 Draft folder 24

Earpiece tone, volume 17 Edition mode 18 Edit SMS 21 Email 20, 25* Enable registration (DECT peripheral) 11,45

FAQ 55, 56 Flash time 43 Fax 19*

Games 47 GAP 11 Group ring tones 26, 40

Handset keys 2 Handset ring tones 39

Icons 3 Idle mode 15 Inbox 21 Installation, base station 13 Intercom 17, 35, 36

Keys handset 2 Keys answer machine (only DECT 727) 48 Key tone 40 Keypad lock/unlock 2, 14

Language, menus 14, 38

Line settings 43 Listening to messages (Answer machine) 49 Local message (Memo) 53 Loudspeaker base 4, 48 Louspeaker handset 2, 17

Make calls 1, 16, 17, 28, 31, 33 Memo 53 Menu overview 7-9 Microphone handset 2 Mute 17

Navigation in menus 15 Network services 46 New entry, phonebook 26 Number of rings for answer machine 51

ON/OFF handset 14 ON/OFF answer machine 48, 49 Outbox 22 Outgoing messages 50, 52

PABX/PSTN 43 Paging key 4 Phonebook 26 Predial 16 Pulse (Dial mode) 43

Range 13 Read SMS 20 Recall type 43 Record a memo 53 Recording personal outgoing message 52 Redial 1, 16, 31, 33 Register handset 45 Remote access to answer machine 54 Remote control code (Answer machine) 52 Rename handset 41 Reply to an SMS 21 Resend message 23 Reset 45 Ring tone type (alarm) 38 Ring tone volume 39 Rings before answering (Answer machine) 51 Room Monitor 42

Save as draft 19, 23 Screening calls 51 Security 44 Send new SMS 19 Send SMS (from Phonebook) 28 Service settings 46 Silence mode 39 SIM card, copy phonebook 30 SMS center and SMS settings 25 SMS tone 40 Soft key functions 9, 15 Store number in phonebook 26, 27 Switch calls 35

Toll saver (Answer machine) 51 Tone (Dial mode) 43 Troubleshooting 57, 58

Unpacking your DECT 723/727 12 Unregister handset 45

View call log 31 View phonebook 27 View SMS 20 Voice language selection (only DECT 727) 44 Volume adjustment (Answer machine) 50 Volume (earpiece) 17 Volume (ring tone) 39

Wall paper 15, 38

*Country dependent

Philips DECT7272S/05, DECT7271S/05, DECT7271S, DECT7272S, DECT723 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual