Easy
Key
5000 Series
Smart Rim Door
Lock
5100
User manual
Register products and get support on the following site:
www.philips.com/support
details, please be subject to the actual product
purchased.
Contents
1 Important
information 02
Security
Caution
Disposal of used
products and batteries
2 Install your EasyKey 03
Packaging list
Exploded views
Pre-installation instructions
Installation steps
3 Get to know
your EasyKey 07
Outside escutcheon
Inside escutcheon
4 How to set
up your EasyKey 08
-Pre-setup Instruction
-Modify Master PIN Code
-User Settings
-Delete a user record
-System Settings
-Extended Functions
-System Query
-Local Query
-Bluetooth Settings
5 How to use your EasyKey 14
Unlock
Outside Unlocking
-With a PIN code
-With a ngerprint(Opt ional)
-With a card
Inside Unlocking
-With rotary knob
-With CLOSE button
Lock
Auto/Manual modes
-Outside locking
-Inside locking
6 Other functions 16
Restore to factory settings
One-button mute function
Outside forced lock function
Inside deadlock
7 Meanings & Use of
indicators 18
Door status indicator
Low battery indicator
Outside forced lock indicator
Mute mode indicator
8 Troubleshooting 20
Alarm types and alarm modes
How to apply an emergency power
How to replace bat teries
1
1 Important information
Security
◆Before using Philips Ea syKey, please
read and understand all instructions.
Damage caused by non-compliance with
the instructions will not be covered by
warranty.
◆Use only the manufacturer-specied
accessories/components.
◆Use only the alkaline batteries the
product is equipped with, or use the
same specification type of alkaline
batteries.
◆Do not forcibly disassemble this product
to avoid tr iggering an alarm or damaging
the product.
◆Do not scrape the ngerprint sensor
with sharp objects, otherwise it may cause
permanent damage.
◆Do not expos e product s to enviro nments
where there is water leakage or splashing.
◆Do not expose the product to corrosive
substances to prevent damaging the
protective cover.
◆Do not hang objects on the handle, in
case it might aect the normal use of the
lock.
◆Pleae clean t he product w ith a soft cloth .
◆Do not remove the batter y during
sett ing up and operating.
◆Please let a professional technician
to install the door lock and follow the
installation guidelines provided.Do not
disassemble the lock by yourself. Keep the
relevant sealed stickers properly. Do not
easily disclose the password information.
◆Please modify the default master PIN
code immediately after nishing installing
and debugging, and keep the mechanical
key properly.
◆Please replace all the batteries
immediately if there is a low battery al arm.
Please make sure to correctly match the
poles (+/-) when installing the batter ies.
Caution
◆Do not place the battery near re
sources to avoid explosion.
◆Do not use any emergency power
supply that does not meet the safety
requirements to power up the product.
◆Do not connect the 2 poles of the
batteries w ith metals to avoid short circuit
which may lead to an explosion.
◆Please make sure any component
replacement is executed by Philips, Philips
authorized service center or professional
technicians.
◆Do not use acces sories or p arts tha t have
been produced by other manufacturers or
have not been specically recommended
by Philips. The use of such accessor ies and
parts may void your warrant y.
Disposal of used products
and batteries
◆You can have your locks recl aimed at
Philips authorized service centers. You will
receive corresponding compensation if
your products meet our conditions.
◆Please familiarize yourself with the local
electronic product collection system.
◆Please follow local regulations and do
not discard used products into ordinary
household waste.
◆Proper disposal of used products can
help to avoid potential negat ive impacts
on the env ironment and human health.
◆Batter ies must not be disposed of with
ordinary household waste.
◆Please familiarize yourself with the local
regulations on batteries classication
recycling. Disposing of batteries properly
can help avoid a negat ive impact on the
environment and human health.
2
2 Install your EasyKey
Packaging list
This packaging list is for reference only. Please refer to the actual packaging
contents.
①Outside escutcheon
(including silicone pad)
④Cleaning Pad
EasyKey易锁
Warranty
Card
⑦Warranty card
②Inside escutcheon
(including silicone pad)
⑤Mounting plate
⑧Smar t key card x2
③Striker
EasyKey易锁
User Manual
⑥User manual
⑨Installation kit
3
Exploded views
1 2
7
3
4
9
5
6
8
1. Outside escutcheon (x1)
2.Outside escutcheon
silicone pad (x1)
3. Inside escutcheon
silicone pad (x1)
4
4. Inner plastic pad (x1)
5. Mounting plate (x1)
6. M5 at-head screw (x3)
7.Inside escutcheon (x1)
8.M4X6 chamfer head
screw (x4)
9.Bat tery cover (x1)
Pre-installation instruction
Step 1 | Check the door opening direction
This product can be installed on doors of 4 opening directions: left-out
pull, right-in push, right-out pull and left-in push.
Left-handle open
Indoor
Left-in
push
Outdoor
Indoor Indoor
Outdoor
Leftout pull
Right-handle open
Indoor
Outdoor
Outdoor
Step 2 Eects of various door opening directions
Left-handle
open
Right-handle
open
Left-handle
open
Right-handle
open
Ri ghtin push
Ri ghtout pull
Step 3 | Select the correct drilling template according to the door opening direction
Door frame
门边
Left-handle
open
Right-handle
open
5
Installation steps
The following install ation steps apply to Left -handle opening. If your door is lef thandle opening, please turn the inside escutcheon upside down.
Pass the connecting cable of the
1
outside escutcheon through the
door hole.
Inser t the cable
3
into the inside
escutcheon.
Fix the inside
4
escutcheon with
screws.
Fix the mounting plate with
2
screws.
Fix the striker with
5
screws.
Attention
Please make sure to hide the ex tra cable in the door hole.
6
Loading...