Philips DC290-05 User Manual
Quick Start Guide
User Manual
Register your product and get support at
REP AL M
SLEEP
SET TIME
MENU
VOL
DSC
DBB
POWER
OK
TUNER
MP3 LINK
MUTE
BRIGHTNESS
PROG
ALM 1
ALM 2
www.philips.com/welcome
Docking Entertainment System
DC290
What’s in the box
© Royal Philips Electronics N.V. 2010
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
DC290_05_QSG_V1.2
Quick start guide
Connect
1
Setup
2
Enjoy
3
User Manual
Quick Start Guide
1
Connect
Connect power
A
Remote control
MP3 link cableMain unit
1 Connect the AC power cord to the wall
outlet.
EN
2
Setup
2
Setup
2
3
Enjoy
2
3
Enjoy
Set time and date
A
1 In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[24 HR] begins to blink. »
2 Press OK / to select the 12/24 hour
format.
3 Press S ET TIM E/PROG to conrm.
The hour digits begin to blink. »
4 Press / to set the hour.
5 Press S ET TIM E/PROG to conrm.
The minute digits begin to blink. »
6 Repeat steps 4-5 to set the minute,
year, month, and day.
Set the alarm timer
B
You can set two alarms which go off at
different time.
1 Ensure that you have set the clock
correctly.
2 Press and hold ALM 1 or ALM 2 for
2 seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE on the top panel to
select an alarm sound source: iPod/
iPhone, FM tuner, or buzzer.
4 Press ALM 1 or ALM 2.
The hour digits begin to blink. »
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2 to conrm.
The minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether
to ring alarm the whole week, on
weekdays, or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
Tip
E
If you set iPhone/iPod playlist as the sound •
source, you must create a playlist in iTunes
called “PHILIPS” and import it to your
iPhone/iPod.
If no playlist is created in the iPod/iPhone •
or there is no song in the playlist, the unit
will wake to songs in the iPod/iPhone.
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [ » AL 1]
AL2] is displayed.
or [
If the timer is deactivated, [ »
AL2] disappears.
or [
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes »
later.
Tip
E
You can press
»
repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm »
settings remain.
/ to adjust the interval to
AL1]
A
Play from iPod/iPhone
1 Lift up the iPhone/iPod dock on the
top panel.
2 Place the iPhone/iPod into the dock.
3 Press iPhone/iPod to select iPod/
iPhone source.
The connected iPod/iPhone »
plays automatically.
To pause/resume play, •
press OK/
To skip to a track, •
press
To search during play, •
press and hold
then release to resume
normal play.
To go back to the previous •
iPod/iPhone menu, press
MENU. To scroll through
the menu, press
To conrm a selection, •
press OK/
If no key is pressed for »
more than 10 seconds,
OK/
play/pause key.
.
/ .
/ ,
/ .
.
acts back as the
B
Program and listen to
radio stations
1 In the tuner mode, press and hold
SET TIME/PROG for more than
2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed. »
All available stations are »
programmed in the order of
waveband reception strength.
The rst programmed »
radio station is broadcast
automatically.
2 Press / to select a preset
number.
Tip
E
Detailed functions and features are •
described in the user manual.
Loading...