Philips DC200-93 User Manual

Register your product and get support at

www.philips.com/welcome

Clock Radio

QUICK START

DC200

Thanks for buying Philips DC200 Clock Radio.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!

ENGLISH

DC 9V

A

B1, B3

3

C2

C1, D4, E2

3

D1, D2, D3

E3

B2, B4, C2

Step

A

Connect the supplied mains adapter to the •
set's 9V DC jack and the plug into a wall outlet.

Step

B

How to set the Clock & Alarm time

Press and hold 1. SET TIME or 1 ALM/2 ALM
until the hour digits flash.

Press and hold 2.
Press 3. SET TIME or 1 ALM/2 ALM to confirm.
Repeat the • steps 2-3 to complete all the
other time items setting.

Selecting the Alarm mode

4. Press

∞ §

your desired alarm mode.

•

For Nature sound mode, press ALBUM/PRESET

1

-/+

/ 2 to select your desired nature sound track.

Helpful hints:

If you have selected – TUNER alarm mode, make
sure you have properly tuned to a station before
turning off the set (See Tuning to radio station).
If you have selected iPod/USB alarm mode, –
make sure you have connected the compatible
iPod player or USB device, or the buzzer mode
will be selected automatically.

3 ways to switch off the alarm

Either press briefly: • POWER 2 or REPEAT
ALARM/
Press • 1 ALM or 2 ALM.

Step

C

Tuning to radio station

Press 1. SOURCE once or more to switch on
the radio.

∞ §

Press 2.
station.

∞ §

to adjust time.

/SOURCE repeatedly to select

BRIGHTNESS CONTROL

repeatedly to tune to your

To store a preset, press • PROG to activate the
programming, and then press ALBUM/PRESET

1

-/+

/ 2 to select a desired preset number, and
then press PROG again to confirm.
To store preset radio stations automatically, press •
and hold PROG for more than two seconds.

Step D

Playing Apple iPod using DC200

Remove the top cover of dock.1.
Snap the correct adaptor (supplied) into the 2.
dock to provide a snug fit for the iPod player.
The indication on the adaptor’s back fits •
specific iPod player.

3. Snap the compatible iPod into the dock
connector.

4. Press SOURCE repeatedly to select the iPod
mode.
The connected player will play automatically. •

Helpful hints:

2;

§

∞

By using the buttons ( –

,

,

and
VOLUME ) on the DC200, the following iPod
playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/
rewinding and changing volume.
Refer to the user manual supplied for detailed –
descriptions of “Compatible portable player”,
“Selecting the correct dock adaptor” and the
important notes for dock operation.

.

Step E

Playing a USB mass storage device

Make sure that your DC200 is being powered 1.
by AC mains.
Press 2. SOURCE repeatedly to select the USB
mode.
Plug a compatible USB mass storage device to 3.
DC200’s USB port marked

Playback will start automatically.

Ü

.