Philips DC200-05 User Manual
Docking Entertainment System
Register your product and get support at
www.philips.com/welcome
QUICK START
DC200
Thanks for buying Philips DC200 Docking Entertainment System.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
D1, D2, D3
3
E3
B2, B4, C2
C 9V
D
A
ENGLISH
Step
A
•
Connect the supplied mains adapter to the
set's 9V DC jack and the plug into a wall outlet.
B
Step
How to set the Clock & Alarm time
1.
Press and hold SET TIME or 1 ALM/2 ALM
until the hour digits fl ash.
∞ §
2.
Press and hold
Press SET TIME or 1 ALM/2 ALM to confi rm.
3.
Repeat the steps 2-3 to complete all the
•
other time items setting.
Selecting the Alarm mode
∞ §
4. Press
your desired alarm mode.
For Nature sound mode, press ALBUM/PRESET
•
-/+ 1 / 2 to select your desired nature sound track.
/SOURCE repeatedly to select
Helpful hints:
If you have selected TUNER alarm mode, make
–
sure you have properly tuned to a station before
turning off the set (See Tuning to radio station).
If you have selected iPod/USB alarm mode,
–
make sure you have connected the compatible
iPod player or USB device, or the buzzer mode
will be selected automatically.
3 ways to switch off the alarm
Either press briefl y: POWER 2 or REPEAT
•
ALARM/
Press 1 ALM or 2 ALM.
•
Step
Tuning to radio station
Press SOURCE once or more to switch on
1.
the radio.
Press
2.
station.
BRIGHTNESS CONTROL
C
∞ §
repeatedly to tune to your
to adjust time.
.
C1, D4, E2
B1, B3
C2
3
•
To store a preset, press PROG to activate the
programming, and then press ALBUM/PRESET
-/+ 1 / 2 to select a desired preset number, and
then press PROG again to confi rm.
•
To store preset radio stations automatically, press
and hold PROG for more than two seconds.
Step D
Playing Apple iPod using DC200
1.
Remove the top cover of dock.
2.
Snap the correct adaptor (supplied) into the
dock to provide a snug fi t for the iPod player.
•
The indication on the adaptor’s back fi ts
specifi c iPod player.
3. Snap the compatible iPod into the dock
connector.
4. Press SOURCE repeatedly to select the iPod
mode.
•
The connected player will play automatically.
Helpful hints:
§
–
By using the buttons ( 2;, ∞,
VOLUME
) on the DC200, the following iPod
and
playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/
rewinding and changing volume.
–
Refer to the user manual supplied for detailed
descriptions of “Compatible portable player”,
“Selecting the correct dock adaptor” and the
important notes for dock operation.
Step E
Playing a USB mass storage device
1.
Make sure that your DC200 is being powered
by AC mains.
2.
Press SOURCE repeatedly to select the USB
mode.
3.
Plug a compatible USB mass storage device to
DC200’s USB port marked
Playback will start automatically.
➜
.
Loading...