Philips DC190B User Manual

Docking Entertainment System

DC190

DC190B

What’s in the box

Speciﬁ cations are subject to change without notice.

Trademarks are the proper ty of Koninklijke Philips

Electronics N.V. or their respective owners.

Printed in China

DC190(B)_37_QSG_V3.0

Quick start guide

Connect

Setup

Enjoy

Quick Start Guide

Main unit Power adaptor MP3 link cable

Connect

Connect power

1 Connect the power adaptor to

the • DC IN jack on the rear of the main unit

the power socket. •

Quick Start Guide

User Manual

Setup

Enjoy

Set clock

1 In standby mode, press and hold TIME

SET/AUTO SCAN for 2 seconds.

» The hour digits begin to blink.

2 Press TUNING +/- to set the hour.

3 Press TIME SET/AUTO SCAN .

» The minute digits begin to blink.

4 Press TUNING +/- to set the minute.

5 Press TIME SET/AUTO SCAN to

conﬁ rm.

» The week day digits begin to blink.

6 Press TUNING +/- to set the week day.

7 Press TIME SET/AUTO SCAN to

conﬁ rm.

Set the alarm timer

1 Ensure that you have set the clock

correctly.

2 Press and hold ALARM 1 or ALARM 2

for 2 seconds.

or and hour digits begin to

blink.

3 Press TUNING +/- repeatedly to set the

hour.

4 Press ALARM 1 or ALARM 2 to

conﬁ rm. »

or and minute digits begin

to blink.

5 Repeat steps 3-4 to set the minute.

6 Repeat steps 3-4 to select whether to ring

alarm on weekdays or at weekend.

“L XX(volume level)” begins to blink.

7 Repeat steps 3-4 to set the maximum alarm

volume.

Set alarm mode

1 Adjust the WAKE TO iPod/RADIO/

BUZZ control to select the source for

the alarm.

When the alarm time comes, the

selected iPod, radio or buzzer turns on.

Activate and deactivate the alarm timer

1 Press ALARM 1 or ALARM 2 repeatedly

to activate the timer.

If the timer is activated,

is displayed.

To deactivate the alarm timer, press • ALARM 1 or ALARM 2 repeatedly

is displayed.

until

If the timer is deactivated,

disappears.

Repeat alarm

1 When the alarm rings, press REPEAT

ALARM/BRIGHTNESS CONTROL .

The alarm repeats ringing minutes later.

Tip

You can press • TUNING+/- to adjust interval to repeat alarm.

Stop alarm ring

1 When the alarm rings, press the

corresponding ALARM 1 or ALARM 2 .

The alarm stops but the alarm settings

remain.

Play from iPod

1 Push to open the dock compartment.

2 Place the iPod in the dock.

3 Press SOURCE repeatedly to select iPod

source.

The connected iPod plays automatically.

To pause/resume play, press •

To skip to a track, press •

To search during play, press and hold •

/ , then release to resume normal

play.

/ .

Program and listen to radio

stations

1 In the tuner mode, press and hold TIME

SET/AUTO SCAN for more than 2

seconds to activate automatic program mode.

» All available stations are programmed

in the order of waveband reception strength.

» The ﬁ rst programmed radio station is

broadcast automatically.

2 Press PRESET +/- to select a preset

number.

Tip

Detailed functions and features are • described in the user manual.