Page 1
Quick Start Guide
User Manual
Register your product and get support at
www.philips.com/welcome
Docking Entertainment System
DC190
What’s in the box
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specications are subject to change without notice.
Trademarks are the proper ty of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
DC190_93_QSG_V1.0
Quick start guide
Connect
1
Setup
2
Enjoy
3
Main unit Power adaptor MP3 link cable
1
EN
Connect
A
Connect power
1 Connect the power adaptor to
the • DC IN jack on the rear of the
main unit
the power socket. •
Quick Start Guide
User Manual
Page 2
2
Setup
2
Setup
2
3
Enjoy
A
Set clock
1 In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
The hour digits begin to blink.
»
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN.
The minute digits begin to blink.
»
4 Press TUNING +/- to set the minute.
5 Press TIME SET/AUTO SCAN to
conrm.
The week day digits begin to blink.
»
6 Press TUNING +/- to set the week day.
7 Press TIME SET/AUTO SCAN to
conrm.
Set the alarm timer
B
1 Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
or and hour digits begin to
»
blink.
3 Press TUNING +/- repeatedly to set the
hour.
4 Press ALARM 1 or ALARM 2 to
conrm.
or and minute digits begin
»
to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to ring
alarm on weekdays or at weekend.
“L XX(volume level)” begins to blink.
»
7 Repeat steps 3-4 to set the maximum alarm
volume.
Set alarm mode
1 Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
When the alarm time comes, the
»
selected iPod, radio or buzzer turns on.
Activate and deactivate the alarm timer
1 Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
If the timer is activated,
»
is displayed.
To deactivate the alarm timer, press •
ALARM 1 or ALARM 2 repeatedly
until
is displayed.
If the timer is deactivated,
»
disappears.
or
or
Repeat alarm
1 When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
The alarm repeats ringing minutes later.
»
Tip
E
You can press • TUNING+/- to adjust
interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
The alarm stops but the alarm settings
»
remain.
Play from iPod
A
1 Push to open the dock compartment.
2 Place the iPod in the dock.
3 Press SOURCE repeatedly to select iPod
source.
The connected iPod plays automatically.
»
To pause/resume play, press •
To skip to a track, press •
To search during play, press and hold •
/ , then release to resume normal
play.
.
/ .
Program and listen to radio
B
stations
1 In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
All available stations are programmed
»
in the order of waveband reception
strength.
The rst programmed radio station is
»
broadcast automatically.
2 Press PRESET +/- to select a preset
number.
Tip
E
Detailed functions and features are •
described in the user manual.
Loading...