Philips DC190/93, DC190 Quick Start Manual

1
Quick start guide
EN
What’s in the box
2
Connect
Setup
Enjoy
3
© Royal Philips Electronics N.V. 2009
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
DC190_93_QSG_V1.0
Quick Start Guide
Quick Start Guide
User Manual
User Manual
Register your product and get support at www.philips.com/welcome
DC190
Docking Entertainment System
Main unit Power adaptor MP3 link cable
1
Connect
Connect power
A
1 Connect the power adaptor to
the DC IN jack on the rear of the main unit the power socket.
DC19093_QSG_V1.0_EN.indd 2-4 11/20/2009 5:41:21 PM
Setup
2
1 In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
»
The hour digits begin to blink.
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN.
»
The minute digits begin to blink.
4 Press TUNING +/- to set the minute.
5 Press TIME SET/AUTO SCAN to
conrm.
»
The week day digits begin to blink.
6 Press TUNING +/- to set the week day.
7 Press TIME SET/AUTO SCAN to
conrm.
Set clock
A
1 In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program mode.
»
All available stations are programmed in the order of waveband reception strength.
»
The rst programmed radio station is
broadcast automatically.
2 Press PRESET +/- to select a preset
number.
E
Tip
Detailed functions and features are described in the user manual.
Program and listen to radio stations
A
Play from iPod
B
Setup
2
Set the alarm timer
B
Set alarm mode
1 Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
»
When the alarm time comes, the selected iPod, radio or buzzer turns on.
Activate and deactivate the alarm timer
1 Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
»
If the timer is activated,
or
is displayed.
To deactivate the alarm timer, press ALARM 1 or ALARM 2 repeatedly until
is displayed.
»
If the timer is deactivated,
or
disappears.
Repeat alarm
1 When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
»
The alarm repeats ringing minutes later.
E
Tip
You can press TUNING+/- to adjust interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
»
The alarm stops but the alarm settings remain.
1 Push to open the dock compartment.
2 Place the iPod in the dock.
3 Press SOURCE repeatedly to select iPod
source.
»
The connected iPod plays automatically.
To pause/resume play, press
.
To skip to a track, press
/ .
To search during play, press and hold
/ , then release to resume normal
play.
Enjoy
2
3
1 Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
or and hour digits begin to
blink.
3 Press TUNING +/- repeatedly to set the
hour.
4 Press ALARM 1 or ALARM 2 to
conrm.
»
or and minute digits begin
to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to ring
alarm on weekdays or at weekend.
»
“L XX(volume level)” begins to blink.
7 Repeat steps 3-4 to set the maximum alarm
volume.
DC19093_QSG_V1.0_EN.indd 5-7 11/20/2009 5:41:23 PM
Loading...