Philips DC156-37B User Manual

Page 1
Quick Start Guide
iPOD
PROG
MENU
MUTE
OK
What’s in the Box?
You should find these items upon opening the box.
DC156
4 Dock adapters
1
Quick Start Guide
2
User Manual
User manual
Remote Control
1
3
2
Page 2
Connection
1
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
2
FM wire antenna
speaker
(right)
1
2
Tip:
It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit.
speaker
(left)
AC power cord
Page 3
Setting the clock
iPOD
PROG
MENU
MUTE
OK
1
In standby mode, press and hold CLOCK/DISPLAY on the remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
2
3
Press CLOCK/DISPLAY to confirm.
The clock digits for the hours flash.
4
Press TUNING 4 ¢ (4 ¢ on the remote control) to set the hours.
5
Press CLOCK/DISPLAY again.
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ (4 ¢ on the remote control) to set the minutes.
7
Press CLOCK/DISPLAY to confirm the time.
Enjoy
Playing a disc
1
Select CD source.
iPOD
PROG
MENU
OK
MUTE
Lift the CD door on the top of the system to open the CD compartment.
2
Insert a disc with the printed side facing up and press down
3
on PULL TO OPEN to close the CD door.
4
PressÉÅto start playback.
5
Press 9 to stop playback.
Page 4
MIC
PUSH TO OPEN
DOCK FOR iPOD
RO SYSTEM DC156
SOURCE
DOCK
STANDBY-ON
REPEAT DBB
CD/CD-R/CD-RW COMPATIBLE
PRESET
iR
VOL
VOL
TUNING
Enjoy
Programming and tuning to radio stations
1
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
2
in order of waveband.
3
Press PRESET +/- until the desired preset station is displayed
Playing iPod using the dock
1
Press PUSH TO OPEN to open the dock.
2
Select the dock adaptor of the correct type and size, and snap it into the dock.
Correctly place your iPod in the dock.
3
Press SOURCE repeatedly or DOCK on the set (iPOD on the remote
4
control) to select iPod source.
The connected player will play automatically.
Tip:
Detailed playback features and additional functions are described in the accompanied user manual.
Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (CD or AUX, for example). – Then select the desired function ( 2;,
4, ¢ for example).
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com
DC156_37_QSG_V2.0
Loading...