Philips DC1000-00, DC1000 User Manual

Docking Cradle for WACS7000 DC1000

Quick Start Guide

Install

A

Connect

B

Enjoy

C

Eng

What’s in the box

Docking cradle 8 x iPod

dock adaptor

DIN Cable RCA Cable Quick Start Guide

IMPORTANT!

• DC1000 is an iPod reader which transmits the signal from iPod to
external speaker. It can be powered by power supply unit
SA1460-240200 or SUPPLY APPARATUS FOR GENERAL USE, alterna-
tively a special system having suitable supplying parameters through 9
pin DIN cable is available.

• For indoor use only.

4 x GoGear

dock adaptors

What else you’ll need

or

WACS7000

IMPORTANT!

The docking cradle only supports the devices listed below. Do not
try it on any other device!
– Apple iPod (iPod video, iPod nano, iPod Photo and iPod mini)
– Philips GoGear HDD players (Charge function optional)

iPod GoGear

A1

1

Install

Change the docking cradle to match with
your portable player

The docking cradle can support both iPod and GoGear. Follow steps below to
change it into desired mode
– Default position is prepared for iPod
– Go to A2

Install for iPod user.

1. Slide the front cover horizontally in the direction shown above to open the

front cover

2. Rotate the front cover in 180 degree

3. Slide the front cover back onto the docking cradle