Philips D300, D305 User Manual

D300

D305

www.philips.com/welcome

Short user manual

When this crossed-out wheeled bin symbol

is attached to a product it means that

the product is covered by the European

Directive 2002/96/EC.

Reproduction in whole or in part is

prohibited without the written consent of

the copyright owner. Trademarks are the

property of Koninklijke Philips Electronics

N.V. or their respective owners.

QSG_D300-305

05_EN_V1.0

WK1315

0168

www.philips.com/support

For information, refer to the extended user

documentation online.

1 2 3

Connect

Multi-handset version only.

Overview

Display icons

It displays the connection between the handset and the base. The more the bars are shown, the better the connection is.

It remains steadily on when browsing incoming calls in the call log.

It indicates an outgoing call in the redial list.

It ashes when there is a new missed call or

when browsing new missed calls. It remains steadily on when browsing the missed calls in call log that are already read.

It ashes when receiving incoming call. It remains

steadily on during a call. The speaker is on.

The ringer is off.

(for D305 only) Answering machine: it ashes when

there is a new message. It remains steadily on when the telephone answering machine is turned on.

Voice messages indicator: ashes for new

messages, is steady for reviewed messages. * This is network dependent

It displays when you scroll up/down a list or increase and decrease the volume.

There are more digits on the right. Press to read.

ECO+

The ECO+ mode is activated.

In call

Phonebook Adjust the volume

End calls Turn the speaker

on/off Mute/unmute the

microphone Enter a pause

Standby

Access the main menu

Phonebook

Call log

Make and receive calls

Make intercom call Lock/unlock the

keypad Make and receive

calls through the speaker

In menu

Conrm / Enter

the option menu / Select

Cancel Up / down

Exit menu

In text input

Delete text Enter a space Switch upper/lower

case

Microphone

Earpiece

Speaker (back of the handset)

Display icons

D305D300

Find

handset

Loudspeaker

(the rear side)

Important safety instructions

Warning

• The Electr ical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

• Refer to safety information before using the product.

• This product complies with European R&TTE

directive 1999/5/EC

• Use only the power supply listed in the user instructions.

• Use only the batteries listed in the user instructions.

• Do not allow the product to come into contact with

liquids.

• Risk of explosion if batter y is replaced by an incorrect type.

• Dispose of used batteries according to the instrucions.

• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid hearing damage.

Frequently asked questions

No signal bar is displayed on the screen.

• The handset is out of range. Move it closer to the base station.

• If the handset displays [Unregistered], register your handset.

If I fail to pair (register) the additional handsets to the base station, what do I do?

Your base memory is full. Access

> [Services] > [Unregister] to unregister the unused handsets and try again.

I have chosen a wrong language which I cannot read, what do I do?

1 Press

to go back to the standby screen.

2 Press

to access the main menu screen.

3 The following options will appear on the screen:

[Phone setup] > [Language] [Réglages] > [Langue] [Telefon-Setup] > [Sprache] [Cong. telef.] > [Lingua]

4 Select it to access the language options. 5 Select your own language.

My handset is in searching status, what do I do?

• Make sure that the base station has power supply.

• Register the handset to the base station.

• Move the handset closer to the base station.

I cannot change the settings of my voice mail, what do I do?

The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

No display

• Make sure the batteries are charged.

• Make sure there are power and phone connections.

The handset on the charger does not charge.

• Make sure the batteries are inserted correctly.

• Make sure the handset is placed properly on the

charger. The battery icon animates when charging.

• Make sure the docking tone setting is turned on.

When the handset is placed correctly on the charger, you can hear a docking tone.

• The charging contacts are dirty. Disconnect the power

supply rst and clean the contacts with a damp cloth.

• Purchase new ones with the same specications.

Bad audio (crackles, echo, etc.)

• The handset is nearly out of range. Move it closer

to the base station.

• The phone receives interference from the nearby

electrical appliances. Move the base station away from them.

• The phone is at a location with thick walls. Move

the base away from them.

The handset does not ring.

Make sure the handset ringtone is turned on.

The caller ID does not display.

• The service is not activated. Check with your

service provider.

• The caller’s information is withheld or unavailable.

Technical data

Battery

• Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries

Use only the supplied batteries.

Adapter

Base and charger: Philips: MN-A102-U130 S003IB0600040 Input: 100-240 V

50/60 Hz 0.2 A

100-240 V 50/60 Hz 0.15 A

Output: 6 V 400 mA 6 V 400 mA Phonebook with 50 entries Call log with 20 entries Talk time: 16 hours Standby time: 250 hours

Note

• You can install a DSL (digital subscriber line) lter

to prevent noise and caller ID problems caused by the DSL interference.

• You can nd the Declaration of Conformity on

www.p4c.philips.com.

Enjoy

Phonebook

Add record

1 Press . 2 Select [Phonebook] > [Add new]. 3 Follow on-screen instructions.

Call from the phonebook

1 Press

2 Select a record and press

Direct access memory

You have 2 direct access memories (Keys 1 and 2). To dial the saved phone number automatically, press and hold on the keys in standby mode. Depending on your country, keys 1 and 2 are preset to [1_voicemail] (voice mail number) and [2_info svc] (information service number) of your network operator respectively (network dependent).

Call log

Call from the call log

1 Press . 2 Select a record and press .

Add record

1 Press

> > [Save number].

2 Follow on-screen instructions.

Delete record

1 Press

> > [Delete].

2 Follow on-screen instructions.

Redial list

Call from the redial list

1 Press . 2 Select a record and press .

Add record

1 Press

> > [Save number].

2 Follow on-screen instructions.

Delete record

1 Press

> > [Delete].

2 Follow on-screen instructions.

Record an announcement (for D305 only)

1 Press . 2 Select [Answ. Machine] > [Announcement]. 3 Follow on-screen instructions.

You can register additional handsets to the base station. 1 Press

2 Select [Services] > [Register], then press

to conrm.

3 Press and hold on the base station for 5

seconds.

4 Enter the system PIN/Passcode (0000). 5 Press to conrm the PIN/Passcode.

Registration is completed in less than 2 minutes.

Restore default settings

You can reset your phone settings to the original factory settings.

1 Press . 2 Select [Services] > [Reset], then press to

conrm.

3 Follow on-screen instructions.

Note

• You may recall the original PIN/Passcode by

following this procedure.

Get started

Insert batteries

Congure your phone

1 When using your phone for the rst time, you see

a welcome message (country dependent).

2 Set the countr y and language if prompted. 3 Set the date and time.

• If the time is in 12-hour for mat, press / key to select [am] or [pm] (country dependent).

Charge your phone

Charge 8 hours

> 70%

40% - 70%

10% - 40%

< 10% Flashing: low battery Scrolling: charging in progress

Philips D300, D305 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual