Philips CTK700BLK/00, CTK700WHT/00, Xenium K700 User Manual
Discover your phone
Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise
this user guide or withdraw it at any time without prior notice. Philips provides this user guide "as is"
and does not accept, except as required by the applicable law, liability for any error, omission or
discrepancy between this user guide and the product described. The device is meant to be connected
to GSM/GPRS/EDGE networks.
Power on/off
key,
Unlock/lock
key
Side
volume
key
Camera key
Status pull-
down menu
262K TFT
LCD
Back key
3.2MP
Camera
lens
Loudspeaker
Loudspeaker
Light sensor
3.5mm
headset
jack
Microphone
Shortcut icons
Multimedia
key
USB port/
charger
1
How to ...
Switch the phone On/Off Long press the Power on/off key ) on the left side of the
phone..
Enter your PIN code Enter your PIN code through the on-screen keypad and
tap on OK to confirm.
Lock the keypad Short press ) on the left side of the phone.
Unlock the keypad Short press ) on the left side of the phone or slide the
lock icon on the idle screen to unlock.
Make a call On the idle screen, tap on to select a contact, or
to enter a phone number, and then, tap on Dial (Call).
Answer a call When the phone rings, tap on Answer.
Mute the ringing call or
sounding alarm
When the phone/ alarm rings, turn over the phone, front
side to the back, or back side to the front (if you have
turned on the options in > Settings > General > Motion
sensor).
Activate/Deactivate handsfree
mode
During a call, tap on Options to access the options list,
select to turn on or off the option Handsfree.
2
End a call Tap on the option End.
Access received messages/
missed calls
On the idle screen, tap on the icon for new messages or
miss calls.
Check all calls history On the idle screen, press the Back key ,.
Check or write messages On the idle screen, tap on .
Access the main menu On the idle screen, tap on .
Quickly return to idle when
browsing menus
Press the Back key ,.
Quickly access to the
multimedia screen
On the idle screen, press the multimedia key M to
quickly access to the multimedia screen. Tap on the
desired multimedia functional icon (Browser, Image viewer,
Multimedia player, Music player and FM radio) to access the
corresponding menu. For more details, refer to
"Multimedia screen" on page 5.
Access the status pull-down
menu
Tap on at the top of idle screen. Tap to select
options.
3
Enter the camera/video mode On the idle screen, press the Camera key. Tap /
to select the camera/video mode.
Select on-screen input keypads/
modes
Qwerty keypad : On the editing screen, turn the
phone counterclockwise by 90 degrees, vertical to
horizontal.
Alphanumeric keypad : Turn the horizontal
phone clockwise by 90 degrees, horizontal to vertical.
Handwriting recognition mode : Tap on /
to switch between the two modes.
Tap on the language, numeric, or input method icon to
select.
Quick access to functions
You can quickly access functions directly from
the idle screen (using the shortcut icons, the
multimedia key M, or status pull-down menu),
or through the main menu.
Shortcut icons
On the idle screen, the four shortcut icons lead
you directly to four functional displays.
: Quick access to messaging
: Quick access to phonebooks
: Quick access to dial pad
: Quick access to main menu
4
Main menu
The main menu gives you access to all the
different features of your mobile phone. The
table below summarizes the functional icons on
the main menu. To find more information about
their functions, refer to the pages.
Tap on on idle screen to access the main
menu. To select your option, tap on the icons
and lists, and then OK. Tap on Options to access
the options related to the selected item. Tap on
Back to return to the previous menu. Press ,
to return to the idle screen.
Fun Browser Multimedia
page 55
page 46
page 57
Camera Messaging My files
page 48
page 24
page 64
Tools Contacts Profiles
page 39
page 34 page 72
Bluetooth Calls Settings
page 69 page 67
page 73
5
Multimedia screen
On the idle screen, press the multimedia key M
to quickly access the multimedia functional
screen. As the following picture:
On this multimedia functional screen, you can
tap on the Browser icon to go to the internet; tap
on the Image viewer icon to enjoy pictures; tap
on the Multimedia player or Music player icon to
play video and audio files; tap on FM radio to
listen to the radio programs. For more details,
refer to "Multimedia" on page 57.
Status pull-down menu
By dragging at the top of the idle screen,
you can quickly turn on/off the alarm, GPRS
connection, Bluetooth, or silent mode; check
battery level; and select your desired profile, or
ring type for incoming calls or messages.
Stylus
The touch screen allows you to enter text by
directly writing on the screen, or tap to select
the desired option. The supplied stylus makes it
easier to do so.
The first time you switch on the phone, you are
asked to do calibration for the stylus. Thus,
strokes or taps by the stylus will be precisely
displayed on the screen.
You can also do the calibration in Settings >
General > Pen calibration by following the screen
instructions.
6
Sensor
With built-in motion and light sensors, the
phone can react to motion and ambient
luminance as desired or necessary.
To use the motion sensor
•In Settings > General > Motion sensor > Mute
incoming call or Snooze alarm, select On.
If a call rings, turn over the phone (front side to
back, or back side to front) to mute the ring
tone.
To interrupt the sounding alarm in the same
way, check that the Snooze is set to a time
interval in Tools > Alarm (see "To set an alarm"
on page 42). To stop the alarm, tap on Stop.
To use the light sensor
•In Settings > Display > Light sensor, select On.
The phone will adjust back light level
automatically according to ambient brightness.
For power-saving purposes, always turn on the
light sensor.
Power-saving mode
After the set time span, the phone has the idle
screen turned off automatically. To exit the
power-saving mode, press any key. For powersaving purpose, set the time span to a low value
in Settings > Display > Backlight duration.
Auto screen lock
In the idle mode, your phone can have the
screen locked automatically after the set time
span.
To set the auto screen lock
Go to Settings > General > Auto screen lock. Select
the desired time span.
Select the option Off to cancel the auto screen
lock.
7
To unlock the screen
Short press ) on the left side of the phone or
slide the lock icon on the idle screen to unlock.
To lock the screen manually
Short press ) on the left side of the phone.
8 Table of contents
Table of contents
1 Getting Started 11
Insert the SIM card 11
Charge the battery 13
Set clock 14
Insert the Micro-SD card 15
2 Text Entry 16
Using the Qwerty keypad 16
Using the supplied stylus
(the handwriting recognition mode) 16
Using the alphanumeric keypad 17
3 Calling 20
Making a call 20
Answering and ending a call 20
Options during a call 21
Handling multiple calls
(Network-dependent) 22
Making an emergency call 23
4 Messaging 24
Creating messages 24
Organizing your messages 26
Defining your message settings 28
E-mail 30
Broadcast message 33
5 Contacts 34
Adding or editing contacts 34
Searching for a contact 35
Managing your contacts 35
Sharing contact information
with others 36
Backing up important contacts 37
Special numbers 37
6 Tools 39
Table of contents 9
Using your business organizer
Create your to-do list 39
Check your calendar 40
Edit your to-do list 40
Delete expired tasks 40
Using your business assistant
Record a sound memo 41
Alarm 41
World clock 42
Stopwatch 43
Text reader 43
Others
Firewall 44
Calculator 45
Currency converter 45
7 Browser 46
Managing your browser 46
Accessing web sites 46
Enabling/disabling push messages 46
STK 47
8 Camera 48
Camera 48
Video recorder 52
9 Fun 55
Java 55
Sensor games 56
10 Multimedia 57
Multimedia player 57
Music player 58
FM radio 61
Image viewer 63
11 My files 64
10 Table of contents
Finding your files 64
Managing your files 64
Sharing your files 65
Using your files 66
12 Calls 67
Call history 67
Call options 67
13 Bluetooth 69
About Bluetooth 69
Connecting to a Bluetooth device 69
Getting connected by
a Bluetooth device 70
Editting your device list 71
14 Profiles 72
Adjusting ring settings to
different scenes 72
15 Settings 73
General 73
Display 75
Sounds 75
Connectivity 76
Icons & Symbols 78
Precautions 80
Tips 87
Troubleshooting 88
Philips Authentic Accessories 92
Trademark Declaration 95
Specific Absorption Rate Information 96
Limited Warranty 98
Declaration of Conformity 102
Getting Started 11
1 Getting Started
Congratulations on your purchase and welcome
to Philips!
To get the most of your product and enjoy all
Philips has to offer, register your product at
www. philips. com/welcome.
Please read the safety instructions in the
"Precautions" section before use.
To use your phone, you must insert a valid SIM
card supplied by your GSM operator or retailer.
The SIM card contains your subscription
information, your mobile telephone number,
and a memory in which you can store phone
numbers and messages.
Insert the SIM card
Follow the steps below to insert your new SIM
card. Remember to switch off your mobile
phone before removing the back cover.
1.
Press on the back cover and slide the cover
as shown.
12 Getting Started
2.
As shown, take out the battery.
You may lose all your personal settings if you
remove the battery when the phone is switched
on.
3.
As shown, align your SIM card with the SIM
card slot, clipped corner facing you and gold
contact downwards. Insert your SIM card
under the metal clip holder.
4.
As shown, align the metallic connectors on
the battery and battery slot. Press the
battery down until it is locked.
Getting Started 13
5.
As shown, slide the back cover along the
slots until it is locked.
Remove the protective film covering the screen
and camera lens before using the phone.
Charge the battery
Your phone is powered by a rechargeable
battery. A new battery is partially charged. The
battery symbol indicates the state of the battery.
To charge the battery, plug in the connector as
shown below. Then plug the other end into a
power socket.
During charging, the battery symbol scrolls.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off the
charger is to unplug it, so it is advisable to use an
easily accessible power socket.
14 Getting Started
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If the
battery is completely flat, the battery symbol will
only reappear after a few minutes of charging.
Set clock
1.
Check that your phone is switched on.
Long press the power on/off key ) if
necessary. Enter the PIN code if required. A
PIN code is a 4- to 8-digit secret code of
your SIM card. It is preset and
communicated to you by your network
operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2.
On the idle screen, tap on and go to
Settings > General > Time & date.
Set format: Select the time (12-hour or 24-
hour clock) and date format by tapping the
desired options, and or .
Set time / Set date: Enter the time and date.
Tap on the box to be defined. To enter
your desired digits, tap or
repeatedly, or long press or until
you reach the desired digits.
3.
To show the clock display on idle screen, tap
on and go to Settings > General > Time
& date > Display time, select On.
Display local and international
clocks
You can display two clocks on the idle screen,
one showing your local time and one the time of
your destination.
Getting Started 15
1.
Check that you have set your local time and
date.
2.
Go to Tools > World clock.
Local settings/Foreign settings: Tap or
repeatedly to select a city. If necessary, tap
Options to turn Daylight saving/Daylight saving
for foreign city on or off.
Switch local/foreign: Switch between local and
foreign clocks.
Insert a micro-SD card (memory
card)
You can expand the memory of your phone by
adding a micro-SD card.
Supported capacity: up to 8 GB
1.
Follow Step 1 and 2 under “Insert the SIM
card”.
2.
As shown, push down the card holder and
lift it up. Align your micro-SD card with the
slot. Put it in place.
3.
Press down the card holder and pull it until
it is locked.
16 Text entry
2 Text entry
Your mobile phone supports text entry through
the on-screen Qwerty keypad, on-screen
alphanumeric keypad, or the supplied stylus
(handwriting recognition mode).
Using the Qwerty keypad
Select text entry modes
• On the editing screen, turn your phone, if in
the vertical position, counterclockwise by 90
degrees.
Check that you are in an input mode other
than or .
Enter text
1.
Tap t o s e l e c t
/ for English entry
: for Chinese entry
: for numeric entry
Depending on the language you select for your
phone, the supported input methods may vary.
2.
Tap on the keys to enter your desired
letters or numbers.
: Tap to move to the beginning of the
next line.
: Tap to delete the previous character.
: Tap to enter a space.
:Tap to enter symbols and
punctuations. Tap again to exit.
: Tap to switch between upper and
lower cases (for English entry).
3.
Tap on Done to complete editing.
Using the supplied stylus (the
handwriting recognition mode)
Select text entry modes
1.
On the editing screen, turn your phone, if in
the horizontal position, clockwise by 90
degrees.
Text entry 17
2.
If necessary, tap on to select
: text entry through the supplied stylus
(handwriting recognition mode)
Enter text
1.
Tap t o s e l e c t
/ / : for English
entry
: for Simplified Chinese
entry
: for Traditional Chinese
entry
: for numeric entry
Depending on the language you select for your
phone, the supported input methods may vary.
2.
Write on the screen using the supplied
stylus, as you do on paper using a pen.
: Tap to move to the beginning of the
next line.
: Tap to enter a space.
: Tap to enter symbols and
punctuations. Tap again to exit.
Using the alphanumeric keypad
Select text entry modes
1.
Follow Step 1 under "Using the supplied
stylus (the handwriting recognition mode)".
2.
If necessary, tap on to select
: text entry through the alphanumeric
keypad
Enter text
1.
Tap to select
/ / / : for English
entry
/ : for Traditional Chinese
entry
: for Simplified Chinese
entry
: for numeric entry
18 Text entry
- Long press to turn T9 input on or
off (for suitable input methods only).
- To set preferred input methods, long
press . On the screen, you will
only find the icons for preferred input
methods.
Depending on the language you select for your
phone, the supported input methods may vary.
2.
Tap on the keys to enter your desired
letters, numbers, or strokes.
to Ta p to input letters (T9
input)
Tap repeatedly to input the desired
letter (multi-tap input)
/ Tap to browse candidate words
on the previous/next page.
Tap to input symbols and punctuations
Tap to input a space
Clear
Short press to clear a letter,
long press to clear all entries.
If necessary, tap on Clear to exit
the input mode first.
- Tap on a candidate word or
Select
to
select.
- To move to the beginning of the next
line, tap on and select .
3.
If necessary, tap on Clear to exit the input
mode.
T9® input
T9 ® predictive text input is an
intelligent editing mode for
messages, which includes a
comprehensive dictionary. It
allows you to quickly enter text.
You need to press only once on
the key corresponding to each letter needed to
spell a word: keystrokes input are analyzed and
the word suggested by T9 ® is displayed at the
pop-up window.
Examples: how to enter the word
"home":
Tegic Euro. Pat.
App. 0842463
Text entry 19
1.
Tap on , , , .
The screen displays a list of candidate
words.
2.
Tap to select “home”.
Multi-tap input (ABC/abc)
Press the keys that are marked with the
corresponding letter you wish to enter. Press
once to get the first letter on the key, press
twice quickly to get the second letter and so on
until the letter you want is displayed on the
screen.
Example: how to enter the word "home":
Press , (GHI) , ,
(MNO), (MNO), ,
(DEF).
20 Calling
3 Calling
Making a call
From the idle screen
1.
Tap o n to enter the phone number.
An on-screen dial pad appears.
2.
Tap on Call to dial the number.
3.
Tap on Cancel to hang up.
For international calls, long press on
the dial pad to enter "+" (the international
prefix).
Use the phonebook (see "Contacts"
on page 34)
1.
On the idle screen, tap on .
To search for a contact, tap on
beside the text box.
Enter the contact name (up to 5
characters). Tap on the input method icon
to select.
2.
Tap on Dial to dial the selected number.
3.
Tap on Cancel to hang up.
Answering and ending a call
When you receive a call, the number of the caller
may be displayed, depending on whether or not
the calling party has chosen to display his or her ID.
If the number is stored in the phonebook, then the
corresponding name is displayed.
• Answer the call: Tap on Answer.
• Hang up: Tap on Reject.
•
To answer or end a call using the supplied
one-key headset,
(see "Headset" on page 92).
•
To reject calls from certain contacts
, you
can add the contacts or numbers to your
blacklist. (For more information about the
blacklist, see "Firewall" on page 44).
The phone will not ring or vibrate if it is in Silent
mode (see "Profiles" on page 72).
Calling 21
Options during a call
During a call, you can tap on Keypad to use the
on-screen dial pad. Tap on Options to access the
following options:
- Hold: Put current call on hold.
- Handsfree: Select turn On or
Off
the
handsfree function.
- Mute: Mute/unmute the call.
- Phonebook: Select or edit contacts in the
phonebook.
- Sound recorder: Record conversation
during a call.
- Messages: Send and receive messages.
- Calendar: Check your calendar (see
"Check your calendar" on page 40) during
a call.
- Calculator: Use the calculator (see
"Calculator" on page 45) during a call.
Sound recorder
In most countries, recording of telephone
conversation is subject to legislation. We advise
you to notify the caller if you intend to record
the conversation and only do so if they agree.
You should also ensure confidentiality of the
recordings.
To record a conversation during a call, tap on
Options and select Sound recorder. Recorded
sound is saved in *.amr format and stored in Audio
of My files menu (see "Finding your files" on page
64).
Mute or unmute a call
During a call, tap on
Options
and select to set the
Mute
function to On or
Off
. If you select
Mute On
,
the microphone will be deactivated.
22 Calling
Adjust the volume
During a call, press the side volume key to
increase or decrease the volume.
Handling multiple calls (Networkdependent)
You can handle two or more calls at the same
time, as well as make conference calls with your
phone. The availability of this feature is
dependent on your network operator and/or
your subscription.
Make a second call
You can make a second call when there is an
active call or a call on hold. While on the phone,
tap on Keypad or Options > Phonebook to enter a
phone number or select a contact, and then tap
on Options > Dial or Dial. The first call is put on
hold and the second number is dialed. When the
second call is received, you can tap on Options to
access the following options:
• Swap to toggle between 2 calls
• Conference to introduce the party into
conference call.
• Handsfree to receive the call in handsfree or
handheld way.
• Mute to deactivate the microphone.
• Phonebook to select or edit contacts in the
phonebook.
• End all to disconnect all parties from the call.
• Transfer to connect the two calls. You are
disconnected when the transfer is completed.
• Sound recorder to record the phone
conversation.
• Messages to send or receive messages
• Calendar to check your calendar (see "Check
your calendar" on page 40) during a call.
• Calculator to use the calculator (see
"Calculator" on page 45) during a call.
Answer a second call
When you receive a second call while already in
communication, the phone screen displays
Calling 23
information about the incoming call. You can
then:
To receive a second call, you must first
deactivate Call divert (see 68) and activate Call
waiting (see 68).
Making an emergency call
Without a SIM card in phone, you can tap on
SOS to make the emergency call.
With a SIM card in phone, you can enter the
emergency number in idle mode, then tap on
Call.
In Europe, the standard emergency number is
112, in the UK, it is 999.
Tap on Answer
To answer the call (the
first one is put on hold).
Tap on Reject
To reject the call.
24 Messaging
4 Messaging
Creating messages
SMS
SMS enables you to send text messages to the
other party, using Short Messaging Service
(SMS). You can use the Create SMS menu to send
messages to another handphone or a device that
is capable of receiving SMS. To compose and
send an SMS, follow the steps below:
1.
Tap on on the idle screen, or go to
Messaging. Select Create SMS, and write
your message.
2.
Tap on Options to access the following
options:
3.
Ta p o n Send to send the message to the
desired contact or contact group (see
"Contacts" on page 34).
MMS
Your mobile phone can also send and receive
MMS (Multimedia Messaging Service) messages.
With MMS, you can send messages that contain
pictures, sound and text.
Save as Save as drafts: Save the SMS
message to Drafts.
Save as template: Save the SMS
message as an SMS template.
Insert
phonebook
No.
Select to insert the phone
number of your contacts.
Use template Select to insert a preset message.
Exit editor Exit the editing screen.
Messaging 25
When sending MMS messages, make sure that
your recipient also has an MMS-enabled phone
in order to view your messages. Follow the
steps described below to compose and send an
MMS.
1.
Select Create MMS, and write the MMS
message.
To insert multimedia slides, tap on
Options > Insert, and then select
To set the play time of MMS slides, tap
on Options > Slide timing. The default value is
5 seconds.
To preview inserted multimedia
slides, tap on Options > Preview.
2.
To send the MMS, tap on Done to access the
next option:
Add picture,
Add audio,
Add video
Insert a slide into your message.
The multimedia slide can consist
of a picture and an audio file, or a
video clip.
Add slide
before, Add
slide after
Insert more slides into your
message.
Add
attachment
Insert a file attachment to your
message.
Add
bookmark
text
Add to your message the website
information you saved as a
bookmark (see "Accessing web
sites" on page 46).
To Enter the number or e-mail of the
recipient.
Cc Enter the number or e-mail of other
recipients to whom you wish to send
a copy of the message.
26 Messaging
3.
After enter the number or e-mail of the
recipient, tap on Done to access the Options
list. You can select Send the MMS only, Save
the MMS to Drafts, Save (the MMS) as
template or Back to edit message.
Copyright protected pictures and sound cannot
be sent by MMS.
Use templates for messages
You can use ready-made messages as new
messages. 10 SMS and 5 MMS messages are
preset in the Templates folder.
1.
Select Templates > SMS or MMS.
2.
Select your desired templates.
3.
Tap on Options, and select Write message.
The ready-made message appears on the
edit screen.
Organizing your messages
Your messages are sorted in the following
folders on your phone memory and SIM card:
Inbox: received messages
Sent: sent messages
Outbox: unsuccessfully sent messages
Drafts: messages saved as drafts
SIM archive: messages saved in the SIM card
Spam Box: rejected or filtered messages
Find a message
• Tap to enter a folder, and then, select a
message.
Manage messages
• Open a message, and then, tap on Options to
access the following options:
Bcc Enter the number or e-mail of the
recipients to whom you wish to send
a copy of the message, by which the
recipients in the Bcc list will be
invisible to other recipients.
Subject Enter the subject of the MMS.
Messaging 27
For the SMS or MMS, or different folders,
available options may vary.
Reply via
SMS
Reply to the MMS sender by SMS.
Reply Reply to the sender.
Reply all Reply to the MMS sender and all
recipients on the Cc and Bcc lists.
Lock mode Select turn the mode On or Off.
Forward Forward the selected message.
Edit Edit and send the selected message.
Edit before
calling
Edit the sender’s phone number
before making a call
Use details,
Use
number,
Use URL
Extract the number or E-mail
address of the sender or in the
message to create messages, make
a call, or save to the phonebook.
Extract the URL in the message to
connect to the website, or add as a
bookmark.
Delete Delete the selected message.
Delete all Delete all messages in the folder.
Save as
template
Save the current MMS as a MMS
template.
Delete
Same
Number
Delete all SMS from the same
phone number.
Mark
several
Select multiple messages to be
deleted. Tap on Select or Cancel to
select messages. To delete selected
messages, select Options > Delete.
28 Messaging
Defining your message settings
Some of your message settings are dependent
on the service you subscribe with the network
operator. Consult your network operator for
your account settings, general settings, server
profile, or other relevant settings.
In Settings > SMS,
Move to
SIM
Move current SMS message to the
SIM card.
Save object Save to your phone or memory
card (if inserted) attached files of
current MMS message.
Properties Show the file information of
current message.
Account
settings
Profile name: Edit the name of the
current profile.
SC address: Select your default
SMS center. If not available on
your SIM card, you must enter
your SMS center number.
Validity period: Select the length of
time your messages will be
stored in the SMS centre. This is
useful when the recipient is not
connected to the network (and
thus cannot receive your
message immediately).
This feature is subscription
dependent.
Message type: Select the format of
your sent messages. This option is
network dependent.
Messaging 29
In Settings > MMS,
General
settings
Delivery report: When selected,
this option will inform you via
the SMS whether or not your
own SMS message was sent.
This feature is subscription
dependent.
Reply path: When selected, this
option allows you to transmit
the number of your SMS message
center together with the
message. The recipient can then
reply using your SMS center and
not theirs. This speeds up the
rate of transmission. This feature
is subscription dependent.
Save sent message: Tap to select
Select: The message is sent and
saved to the Sent folder.
Cancel: The message is sent only.
Memory
status
This option can display the
memory status of the messages
saved in the SIM card and the
phone.
Pref. bearer This option allows you to set the
preferred transmission mode.
You can select Prefer GPRS, Prefer
GSM or GSM only. For further
details, please contact your
network operator.
Compose
settings
Set Slide time, Creation modes, Image
resizing, Auto signature and
Signature. When Auto signature is
set to On, edit your signature in
Signature.
Sending
settings
Set Validity period, Delivery report,
Read report, Priority, Delivery time
and Hide sender options for sending
an MMS message.
Loading...