Philips CGA7740N Firmware Upgrade Instruction

How to upgrade the CGA7740N Wireless Base Station firmware

The last CGA7740N/00 and CGA7740N/05 firmware which can

be downloaded from Philips website is: V 0.13

This How-to manual will answer the following questions:

1. Why should I upgrade my CGA7740N firmware?

2. How do I know which firmware version I have in my CGA7740N?

3. How do I know what the latest firmware is?

4. How do I upgrade to the latest firmware?

5. Your CGA7740N Wireless Base Station firmware is now upgraded.

Page 1 of 7

How to upgrade the CGA7740N Wireless Base Station firmware

1. Why should I upgrade my CGA7740N firmware?

• To add new functionality or to fixes some issues.

Issues Problems fixed:

1. UCP protocol can set MTU, VPI, VCI of PPPoA correctly ( CD install ).

2. Fix NTC bugs

2. How do I know which firmware version I have in my CGA7740N?

Make sure your PC is connected to your Wireless Base Station (either by Wi-FI or by Ethernet)

2.1 Determine the IP address of your CGA7740N Wireless Base Station.

Click on your PC Start => Run

The Default Gateway shows the IP address of the Wireless Base Station .

Type cmd and click OK.
type ipconfig followed by Enter.

Page 2 of 7

How to upgrade the CGA7740N Wireless Base Station firmware

2.2 Browse to your CGA7740N Wireless Base Station.

Open Internet Explorer and type the Default Gateway address in the Addre ss bar.

Click GO.

You should now see the setup page.

2.3 On the Home network Settings page, click on Status and you can find the firmware version.

Page 3 of 7